MORE HANDBOOKS ARE ON THEIR WAY! We will let you know when they get here.
×
Chuck Seiler
-
Posts
1,868 -
Joined
-
Last visited
Reputation Activity
-
Chuck Seiler reacted to GuntherMT in Armed Virginia Sloop by GuntherMT - FINISHED - Model Shipways - scale 1:48
The day has come. I spent a lot of time messing with the anchors, but I simply couldn't find a position where they looked decent to me when lashed to the timberheads, so I chose to display them hanging from the catheads. I then spent far more time than I probably should have messing with the anchor buoys, and in the end was just unhappy with how they looked when properly attached to the anchors, so I decided to display the ship without them. I may make a couple of rope coils and place them on the empty timberheads where the buoys would be hung and belayed, but other than that, and some inspection and touch-up painting/matting, the Serenity is done.
I need to re-do my lighting arrangement (which means rearranging the room I take these in) as I'm not real happy with the way these photo's turned out (from a lighting perspective), so I will probably do a full 'finished' photo-shoot sometime later this week.
Image dump (bigger than usual - 1600x on the long side)...
-
Chuck Seiler reacted to CharlieZardoz in Sultana by CharlieZardoz - Model Shipways - 1:64
To a degree Gunther perhaps. The main benefit is that you can draw on it and if you cut off too much here and there you can just put some back on with wood putty. While plank on frame may be more precise due to laser cutting, you run into the same problems when filling in the bow and stern and if you are not careful the ribs may be uneven which isn't as much of an issue in solid hull. That said ill be happy when the shaping is finally over lol.
-
Chuck Seiler reacted to CharlieZardoz in Sultana by CharlieZardoz - Model Shipways - 1:64
Chuck's planking diagram shows where the planks should line up. After the wale there are 3 planks and then the 4th plank overhangs and begins making the bulwark which is only 2.5 planks in height. On the inside the planks line up causing an interlocking effect. I wanted to plan this now so to make sure I put the bulwark where it should be once I start shaping again.
-
Chuck Seiler got a reaction from Bobstrake in 2015 NRG Conference Update - MYSTIC
While I did not attend the conference this year, I can speak from experience from previous NRGs and SMA conferences, the round table discussions alone are quite valuable. The downside is that you can't attend them all.
Keep up the great work guys. I am looking forward to NRG San Diego next year.
-
Chuck Seiler got a reaction from Elijah in 2015 NRG Conference Update - MYSTIC
While I did not attend the conference this year, I can speak from experience from previous NRGs and SMA conferences, the round table discussions alone are quite valuable. The downside is that you can't attend them all.
Keep up the great work guys. I am looking forward to NRG San Diego next year.
-
Chuck Seiler got a reaction from bebopsteve in GUNBOAT PHILADELPHIA by Steve.Y - FINISHED - Model Shipways
DOH!!!!! That shows you how far I got with the kit.
-
Chuck Seiler got a reaction from GrandpaPhil in Gunboat PHILADELPHIA 1776 by Chuck Seiler - Scale 1:48 - from Model Shipways plans
I grow weary of rope coils.
Progress as of today. All the shrouds and stays are in place. Forward railings have been installed. Anchors installed and 'housed'. At this point not much going on aft of the starboard 9 pounder. Alot of rigging (for this model) andassociated rope coils.
As I mentioned earlier (either here or elsewhere) as I was grappling with the crowded confines of the area below the mast,I realized I needed to rig the blocks, etc from the perspective of the folks on the ship,as opposed to the way it would be easier to do. I managed to snag existing rigging and rope coils on several occasons, but with minimal damage.
A gander at the opertion from the port side. Note: The stock on the anchor is nailed together (simulated).
Stairway to heaven...or at least to the topmast. When I was working on this, I mentioned to several fellow modelers that I was attaching the rungs to the shrouds. They felt compelled to correct me, "You mean ratlines?" "No, I mean rungs." This was only on oneside, for some reason. Perhaps they got as tired as I did working on it and gave up.
Another view of the fore deck area. More rope coils. Anchor cable not so neatly coiled up on deck for folks to trip over.
-
Chuck Seiler got a reaction from GrandpaPhil in Gunboat PHILADELPHIA 1776 by Chuck Seiler - Scale 1:48 - from Model Shipways plans
I flew some Sailors in to square away the lubberly rigging. Here is where I am as of now.
The swabbies thought the ladder rungs, in lieu of ratlines, were cute, so they left them on. Once I get the starboard gun installed, the rigging will go very fast. Once that is done, the forward railings and awning structure...as well as cats and dogs like anchors, rope coils, sweeps, etc.
I had taken several pics during our Guild meeting Wednesday, but all except this ended up being out of focus. More pics this weekend...if I can see thru the smoke and ash.
-
Chuck Seiler got a reaction from ggrieco in Gunboat PHILADELPHIA 1776 by Chuck Seiler - Scale 1:48 - from Model Shipways plans
Bow gun and fore stay spreader mounted.
-
Chuck Seiler got a reaction from ggrieco in Gunboat PHILADELPHIA 1776 by Chuck Seiler - Scale 1:48 - from Model Shipways plans
Here is how my experimentation with the swivel gun yoke turned out. Not bad for a prototype, but still needs some work.
"Barn door" with lower pintol in the background.
-
Chuck Seiler got a reaction from mtaylor in GUNBOAT PHILADELPHIA by Steve.Y - FINISHED - Model Shipways
DOH!!!!! That shows you how far I got with the kit.
-
Chuck Seiler got a reaction from Canute in GUNBOAT PHILADELPHIA by Steve.Y - FINISHED - Model Shipways
DOH!!!!! That shows you how far I got with the kit.
-
Chuck Seiler got a reaction from druxey in 2015 NRG Conference Update - MYSTIC
While I did not attend the conference this year, I can speak from experience from previous NRGs and SMA conferences, the round table discussions alone are quite valuable. The downside is that you can't attend them all.
Keep up the great work guys. I am looking forward to NRG San Diego next year.
-
Chuck Seiler got a reaction from Canute in GUNBOAT PHILADELPHIA by Steve.Y - FINISHED - Model Shipways
Steve,
Looking great!!! Your starboard shrouds/ladder look real good. The close up shots are nice. It brings out the details. You have really done a great job.
Forward rail: Did you bend it of cut it curved?
I don't see the metal support wrap holding the mast to the crossbeam. Am I missing something or are you adding that later?
Are you bringing this down to San Diego next year?
-
Chuck Seiler got a reaction from Canute in 2015 NRG Conference Update - MYSTIC
While I did not attend the conference this year, I can speak from experience from previous NRGs and SMA conferences, the round table discussions alone are quite valuable. The downside is that you can't attend them all.
Keep up the great work guys. I am looking forward to NRG San Diego next year.
-
Chuck Seiler reacted to ggrieco in Heroine 1838 by ggrieco - FINISHED - Scale 1:24 - Western River Steamboat as she appeared before hitting a snag in the Red River
The mill has been running non-stop and I had forgotten how many pieces this engine has.
i have finally gotten around to a little bit of assembly of the parts. I'm hoping to complete the engine in November and then move onto the boilers in December.
The nine pieces that make up the feedwater pump
The nine pieces soldered together awaiting clean-up and blackening
The six pieces that make up the Starboard Flywheel
The completed fdlywheel awaiting clean-up and blackening
Completed flywheels for the two models. The differences in the styles of the port and starboard flywheels can be seen. Evidence of a possible repair during her life on the river.
Checking the fit of the engine cylinder to the sole plate before the plate is let into the top of the cylinder timber.
-
Chuck Seiler got a reaction from mtaylor in GUNBOAT PHILADELPHIA by Steve.Y - FINISHED - Model Shipways
Steve,
Looking great!!! Your starboard shrouds/ladder look real good. The close up shots are nice. It brings out the details. You have really done a great job.
Forward rail: Did you bend it of cut it curved?
I don't see the metal support wrap holding the mast to the crossbeam. Am I missing something or are you adding that later?
Are you bringing this down to San Diego next year?
-
Chuck Seiler got a reaction from mtaylor in 2015 NRG Conference Update - MYSTIC
While I did not attend the conference this year, I can speak from experience from previous NRGs and SMA conferences, the round table discussions alone are quite valuable. The downside is that you can't attend them all.
Keep up the great work guys. I am looking forward to NRG San Diego next year.
-
Chuck Seiler reacted to kruginmi in HMS Druid by kruginmi - 1:48 - cross-section - Hahn
Thanks all.
This hits the definition of what is the 'right' way. In my sense, that could be different from person to person. Brilliant? I don't know about that, some would probably say a lost opportunity. However, the old saying "I am the captain" rules all. I don't think the over all effect would have been any better. Again, lots of details to accomplish like softening the hard edges as well as battens and such.
I think I have become more comfortable in this hobby, particularly after finishing the full Druid. With the Druid-X I am having a lot of fun and not 'hanging on' too tight. Should I say I am even considering ordering the blocks for the rigging? The understanding of the rigging was the big mountain for me.
Mark
-
Chuck Seiler reacted to kruginmi in HMS Druid by kruginmi - 1:48 - cross-section - Hahn
So after finally settling down on understanding the number and type of lines, I can move into the job of estimating what type of work I have in front of me with regards to blocks. Currently I am showing 132 blocks are needed for this cross section (wow). For the basic type (single and double) there are:
So you can see the actual ship had 12 varieties of these from 5" to 20". For the model on a first pass I am looking at cutting this down to 8 types from 1/8" to 3/8". So, for example, the 5, 6 and 7 inch single blocks are combined to the 1/8" scale block. The question now is whether or not I should combine more, to like three of each type. Feedback welcome.
For the rest of the blocks, the numbers are much smaller (besides the dead eyes):
There are one offs that I can think about actually making without going a little crazy. Still need to go over the blocks again and am sure to add more - the biggest mistake I keep making is to double shown quantities to account for port and starboard.
Really enjoying the process, hope to start building again soon!
Mark
-
Chuck Seiler reacted to kruginmi in HMS Druid by kruginmi - 1:48 - cross-section - Hahn
The berth deck height is correct, Mark. My issue now is to decide whether to shorten the figures I have to bring them more into a 5' 6" or less arena. I can't just take a little from the torso, since their knuckles will drag on the floor - need to shorten the arms also. This 'short cut' of getting base figures isn't getting so short anymore!
Maybe I will just put bandages around their heads to show where they keep bashing them against the beams! Or to be safe, add scale yellow tape warning of the low overhead.....
Mark
-
Chuck Seiler got a reaction from Jack12477 in 2015 NRG Conference Update - MYSTIC
While I did not attend the conference this year, I can speak from experience from previous NRGs and SMA conferences, the round table discussions alone are quite valuable. The downside is that you can't attend them all.
Keep up the great work guys. I am looking forward to NRG San Diego next year.
-
Chuck Seiler reacted to bebopsteve in GUNBOAT PHILADELPHIA by Steve.Y - FINISHED - Model Shipways
Thanks David! Just received Syren rigging rope today. (I had ran out) Rigging is done!
Is it best to tie the lines to the cleats like a real situation? I am thinking to Not secure to the cleats with any glue. Anyone
want to give me a tutorial on securing the lines?
Thanks!
-
Chuck Seiler got a reaction from dgbot in 2015 NRG Conference Update - MYSTIC
While I did not attend the conference this year, I can speak from experience from previous NRGs and SMA conferences, the round table discussions alone are quite valuable. The downside is that you can't attend them all.
Keep up the great work guys. I am looking forward to NRG San Diego next year.
-
Chuck Seiler reacted to bebopsteve in GUNBOAT PHILADELPHIA by Steve.Y - FINISHED - Model Shipways
Getting the anchors installed. I really like the rope from Syren. Anyway, few pics...
Our Emblem ®
