-
Posts
73 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Posts posted by Harvey
-
-
- Seventynet, canoe21 and CaptainSteve
- 3
-
- canoe21, Kevin, CaptainSteve and 1 other
- 4
-
-
-
- Seventynet, Kevin, Kenneth Powell and 6 others
- 9
-
- CaptainSteve, canoe21, Altduck and 4 others
- 7
-
-
-
Hi
What masking tape are you using have you tried an anti bleed masking tape.
just a quick thought
- thibaultron, Canute, Ray1981 and 1 other
- 4
-
-
-
Hi J
The netting came from one of my daughters old party dresses (when you are a ship builder always on the look out for things to use)
Painted it on a piece of glass with clear mat varnish to stiffen it when dried cut to size and stuck it on with varnish and the rope
hope this helps
-
-
- Seventynet, shipcarpenter, gjdale and 2 others
- 5
-
Hi
Rainbow must have been about 20 years ago I started,but it was put away for 15 Year ish.
When I restarted I ripped the complete inside of the hull out and built it up from there deck by deck see page one of my build log.
-
Thank you Steve and Mike for your kind words a little encouragement always makes things better.
-
-
-
Hi Mark
I did not splice the served shrouds, Got a shroud marked where the serving should be and served the middle then wraped (Think the correct term is frapped) round to make a loop just big enough to go over the mast here is a picture of one that went very wrong.
Hope this helps if not let me know.
- CaptainSteve and canoe21
- 2
-
- canoe21, CaptainSteve, Kevin and 2 others
- 5
-
- challenger86, Seventynet, Kevin and 3 others
- 6
-
- canoe21, Seventynet, GuntherMT and 2 others
- 5
-
HI
Thank you again Grant and captain Steve and GuntherMT for your likes and comments.
Have not done much in the shipyard but I have finished the shrouds and the lanyards, Not totally happy with the lanyards the way I have tied them around the shrouds, so I will leave for a couple of days before I make any decisions, but might redo with a thicker rope and see if it sits any better.
Things must be getting serious because I have glued in the bowsprit, I was leaving as long as possible so the ship was easer to turn on the work bench.
Picture next time when I start to rig it in.
-
- CaptainSteve, gjdale, canoe21 and 2 others
- 5
HMS Victory by Harvey - Corel - scale 1:98
in - Kit build logs for subjects built from 1751 - 1800
Posted
Hi
Thank you Lawrence just about to go up to the ship yard and hopefully finish the ratlines tonight.