hornet
-
Posts
661 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by hornet
-
Received partially-built Corel Victory -- worth salvaging?
hornet replied to SaltyScot's topic in Wood ship model kits
I built this kit many years ago. There is a great deal left to do and I don’t think you would come out the other end with a satisfied feeling. In my opinion you should put the rest of the kit into your store of spares and write off the hull. My Corel Victory pictured below.
-
I recently completed the Endurance. I found a number of problems. The funnel was the incorrect shape. Belaying pins supplied were too big. Supplied rope was not always to scale, only two sizes of deadeyes when more sizes would have allowed for more accurate representation. Anchor chain also out of scale(links too small) Portholes on side of cabin were out of scale (too small) Propeller had 3 blades and should have only had two. Supplied flag incorrect. Should have been a blue ensign not a white ensign. I wouldn’t recommend this kit to you if you were keen on historical accuracy.
-
Thanks Gary. I didn’t realise. Glad I asked. I’ll look elsewhere.
-
Has anyone completed, or has any information on any of the Modelship Dockyard Kits sold through Drydock Models & Parts? I was looking at the Hayling Hoy kit. I know they are shipped from China.
-
Having built the Corel version, I would say the dimensions don’t look quite right.
-
Might I suggest you invest in some planking screws. They make a fiddly job much easier. https://www.modelerscentral.com/modeling-tools/hand-tools/holding/planking-screws-p12/
-
Mine is made of a piece of poly pipe with 2 end caps. It has a four bladed sandpaper impeller. Fitted with a motor that is hooked up to a variable speed switch box.
-
This may help. Hull of the Endeavour Replica under construction.
-
I built the Corel Victory approximately 25 years ago so I can’t really remember what I did in your situation. I’ve included a couple of shots of the rear deck which may help. Stick with it as she is a beautiful model when completed.
-
Perhaps you could experiment with Model Aircraft Dope which is used to seal and tighten the ‘skin’ on model aircraft. I’ve not tried it but it may be worth a try.
-
I’m currently building the Caldercraft version and it is on the brass etch sheet. It may be that yours is the same. I replaced mine with ones I made from timber.
-
Holding small parts for soldering
hornet replied to BETAQDAVE's topic in Metal Work, Soldering and Metal Fittings
Tweezers held in the jaws of a fly tying vice works for me.
-
This is mine. May give you some ideas.
-
YouTube videos from Modellers Central will give you a basic guide to planking a hull.
-
Fokker Dr.I by hornet - Artesania Latina - 1/16 scale
hornet replied to hornet's topic in Completed non-ship models
Cast pieces on the Artesania Latina kits are quite well done. My biggest issue was that gluing was done with cyanoacrylate glue which I am allergic to. I used 5 minute epoxy which was awkward at times. -
I decided to make a companion for my Sopwith Camel (posted here a while back) The Fokker DR 1 seemed most appropriate choice. If I had to chose the most enjoyable build, I’d say it was the Camel. In saying that, I’m happy with the way the DR1 turned out. cheers Steve.
- 12 replies
-
- 20
-
-
Sopwith Camel by hornet - Artesania Latina
hornet replied to hornet's topic in Completed non-ship models
Was quite an enjoyable kit to build. Instructions on CD not printed but you could print them off if so desired. Great detail in kit. Gave me a chance to practise my airbrushing skills too😀 -
Short break - something different - before beginning the HMB Endeavour. Am also going to build the Fokker Triplanes by the same manufacturer.
- 3 replies
-
- 17
-
-
I find that holding very small items like blocks in an inexpensive fly tying vice is very helpful. There are many cheap vices for sale on eBay. I have found that my fly tying vice is one of my most useful tools in model making.
-
I’ve built two Caldercraft models and am on my third. They are quite good quality for the money and have a good range of models for different skill levels.
-
Rope-where to go since Syren is no longer making it?
hornet replied to bear's topic in Masting, rigging and sails
I use my own home made rope walker. I scour antique stores for cotton and linen thread. Apparently old cotton reels are collectable. I’ve found that old thread is often better quality than modern thread. -
If making your own rope, haunting antique and collectable shops is worthwhile. Apparently the old cotton reels are now collectable. I’ve managed to gather quite a collection of linen and cotton threads in a range of colours and diameters that are much better quality than modern thread.
-
HMS bounty colour?
hornet replied to Rich12ace's topic in Painting, finishing and weathering products and techniques
I used Admiralty paints on my Bounty. Excellent. - French Blue - Red Ochre - Yellow Ochre http://www.jotika-ltd.com/Pages/1024768/PSA_Paint.htm -
Check out my build. Posted yesterday. Copper bottom.
-
Domanoff Rope serving machine SM4 question
hornet replied to modeller_masa's topic in Modeling tools and Workshop Equipment
I have an older model of this machine. I improved it by adding another length of threaded rod to the front to hold a reel of thread. It makes the job a lot easier. I simply drilled and bent up two right angled brackets in Perspex then drilled a hole in the front (base) of each of the legs on the serving machine. I bolted on the the brackets then threaded the rod through holes drilled in the top of the brackets. I can change thread reels simply but undoing one of the nuts on the threaded rod and changing reels.
Our Emblem ®
