davyboy

All hands on deck.............................he i said aaaalllllll haaaaands
 
After I make the many hooks, eyes and blocks (for the guns) have already spots before the eyes, was a small relaxation törn due for the eyes
 
Therefore, I once make another figure from the bulwark ornament.

The images come in the series of steps.
 
After the figure was transferred to paper and glued to the bone support, it was sawn on the contours.
 
And now have fun with the pictures:
 
 

 

 

 

 

 

 

 

 

 
 
Have fun

Thanks you all for your comments.  If our purpose is to encourage discussion, it seems to have worked.
Mark, It was rather a crude first attempt and I have no doubt someone will come up with a better method.  Making coils at the work table and then placing them makes sense but it didn't seem practical for the jeers and braces. 
Daniel (Sailor 1-0) I accept your admonitions and I probably took too much artistic licence.  I hope your "spidey senses" have recovered. Our own boat certainly reflects your First Lieutenant's view. On the other hand, David Steel noted in 1794 that the main yard jeers (jears) were 2 1/2" (6 cm) in diameter and 70 fathoms each in length.  At the least, when two blocked, somewhere around 300' of heavy line remained on deck. Coiling this mass of line as one would smaller lines is not possible.  The main brace at 1 1/2' and 50 fathoms, probably left around 200' on the lee deck.  At the other extreme are flag halyards which being circular, had no tail.  Perhaps we can agree that a series of coils, the same shape and size does not fairly simulate a working ship.
 
And that was the thesis of the post. To raise our awareness to the wide variety of size and length of lines on a sailing ship and reflect those differences in our models.  I sincerely appreciate every comment, and look forward to when Daniel (Dafi) reaches this stage on his Victory.  We will see fifteen tars hauling on a line with a petty officer calling the count. Animated? With sound?  I can't wait.
Cheers, Gil

Thanks to everyone who have visited my shipyard and looking at my progress, it's much appreciated.
 
Today I braved the cold again in the garage but managed to finish the gun deck railing 
I started out by making the hardware for the for the forward railing where the gun bun lid has to fold open.  I made two eye pins that are to slide inside the most forward stanchions.  These are made from 1 mm brass tubes.  Then a hook so we can unhook the chain when needed.  This hardware is made from 0.5 mm brass rod.  I had to make the hook four times, goes to show yuns that things sometimes just don't work out right away   One time I lost the hook when trying to attach it to the chain.  I had it in tweezers and it just popped out and went flying somewhere.  Good luck finding it so it was quicker to make a new one.  So what is another 10 minutes of work - - -  pfffffffffffff  
 
I then soldered these into place and started on the railing caps that I made from 0.8 mm brass rod.  They had to be bend in places to follow the contour of the decks as shown on the photos I have.  I had to remake the forward starboard cap because I didn't like the first one.
When I was happy with them they were then soldered to the tops of the stanchions.  After filing most of the excess solder off and cleaning the railings with MEK I could paint them.
 
When I looked at the pics I made previously I noticed that the top antenna brace was not level, it was a little higher on the port side.  So, I had to desolder this end and file quite a bit off the vertical post and re-solder it back in place.
 
I started to make the template for the snorkel exhaust guard but it was now 1730 hours and time to quit, my legs were getting tired and eyes started to water and burn.
 
I also performed the test with putting polly urethane on a piece of dyed deck slat and then glueing it to a freshly painted piece of wood with TiteBond.  At quitting time I tried to dislodge it and it was holding quite nicely without any dye weeping through.  Thanks Remco for the suggestion, it seems to work.
 
Okay, time for a few pics of today's progress.
 

This shows the individual parts for the removable chain in the forward part of the front gun deck.  A fixed rail cap would prevent the gun bun lid from opening all the way.  The lid should rest on the deck. I found some small chain in my Thermopylae plastic kit I still have on the shelf.
 

This shows all the parts assembled, the eye pins soldered in the stanchions and the hook attached to the chain and hooked to the port side eye pin.  And yes, it is removable   
 

This shows the forward gun deck railing stanchions with the chain installed.  Here you can clearly see that the cross beam of the antenna brace is a little too high on the port side.  That beam is where the ship's bell hangs on.  That'll be fixed a little later.
 

Here is a view with both the front and rear gun deck railings completed and painted.  At this point I have also lowered the port side crossbar of the antenna support  bracket.  Much more better   
 

Another view of the completed gun deck railings.
 

Completed gun deck railings looking forward.
 

Top view of the conning tower with completed gun deck railings.
 
Cheers, 

from may i may do a daily snippet about a famous ship or person connected with Naval history

Well, of course it went the way I dreaded, the way the skipper wanted. I had to remake the rear bench and that little deck in the bow of the longboat.
 
The details of the launch were completed and fortunately it fit into the reworked longboat without any additional supports.
Provisional stowing on the spare spars seems to show a piece of luck - that it should be possible to fix those two boats there just as they are.
 

Reworked longboat and detailed launch
 

Boats provisionally stowed

Hello dear friends and thank you warmly for your kind words and recognition, I am extremely honored!!

Well, I must say that I was so much nervous during filming the reportage. My students helped me a lot, I like them very much. We are friends.
 I'm glad that was paid attention on TV to this beautiful hobby that connects us all together.
 
On Royal Caroline I have improved and added another details. Please, enjoy the pics and have a great time.

Best regards,
Doris
 








 
 

  

Today I have got a surprise for you, there was another report on TV about my hobby and work ( i am a teacher at secondary school), so you can watch it here at this link:
http://www.ceskatelevize.cz/ivysilani/10122978233-udalosti-v-regionech-ostrava/414231100030117-udalosti-v-regionech/obsah/303453-modelarka-stavi-plachetnici-z-18-stoleti-i-s-posadkou/
 
Please, enjoy it and have a great time.
 

Thanks guys.
Ed, I will make a brick base underneath. My NMM plans don't show additional carlings or pillars so I'll leave the layout as it is.
 
Yes Sir Druxey, soot coming up, I had to make a little fire in the hearth to create this
 

 

 
All it needs now is a chimney to the upper deck and then I'll ask permission to call this challenge completed
 
Remco

Christian, based on what I know probably a brick hearth or a Brody style stove, but not a real Brody stove.
Sure Gary, I'll start taking orders
 
The pots are tubes turned on the lathe to give it a small rim, bottom and handles silver soldered. I made a smaller fish pot for the stove. Work began on the doors fitted to the sides of the stove, hinges and locking mechanism works, I think they look a bit heavy for a simple door, looks more like a safe door. Have to think about this .....
 

 
 
 

 
Grant, remember the wicker basket...
 

 
Remco

Hello everyone and thanks for visiting and liking my work, really appreciated. 
 
Hi Mark, well, after I found out that CA glue and solder don't like each other I first tinned a small spot on the dome and the end of the brace.  Then held the brace in my left hand with tweezers and tacked it in on the lid.  Then I could use a steel office file clamp as a heat sink and soldered the rest.  The one next to it I did in a similar fashion.  Duck soup, as they say.  Thank you for your compliment!
 
Hello Popeye, thank you,  Yes, it's a little tedious but with some patience it works.
 
Today I semi finished the hinges for the AA gun bun lids.  Some more tedious work, even more so then the lids because of the hinge pin holes that had to line up  and allow the pin to go trough the little copper tube, straight, so the lid would close evenly.  It too worked out okay and I'm actually ready to cement the ring with the center hinge tube to the styrene bun.  
I think that I'll secure the hinge pins with a dab of 5 minute epoxy and then paint them.  The epoxy should simulate the securing hardware.
 
I also started to modify the two AA guns so I can put the two hand wheels on them to allow the crew to rotate and train the guns on their target.  No, They are not really going to rotate but at least it'll look like the guns are close to being finished.  (No pics for that little project yet)
 

This is how the bottom portion of the hinge assembly starts, a strip of brass sheet the same width as the outer ring that fits over the gun bun. The hinge pin bracket will be made from a piece of this strip.
 

This is the completed hinge pin bracket.  The copper tube will be soldered to the top of this bracket.
 

Here are all the parts I need to finish the complete hinge assembly.  The bun lid that was made yesterday, the ring that was made last week, the little bracket, the copper tube and brass pin for the hinge.  Sorry, but I did not make a photographic sequence of events in assembling all this to the finished product, you'll laugh when you see it 
 

This is the completed AA gun lid assembly on the forward gun bin.  I just put the gun in the bin for fun.
 

This is another shot of the forward gun lid assembly.
 

This is the aft AA gun bun lid in the closed position.
 
Cheers,

Hi Martijn,
 
Can´t help with UK but check these German suppliers :-   www.arkowood-shop.de
 
                                                                                            www.modellbau-holzleisten.de
 
The second one has a big selection of woods in both strip and sheets and is also somewhat cheaper.
 
Dave

It is easy to criticize something like this. As mentioned the people who buy this sort of thing are as has been stated likely just buying a piece of "decoration" As "offensive" this might be to some, think about the implications for the "craftsmen" who are making this stuff. (How different is this from the rather garish decorations that adorn a great number of houses every Christmas, the fake trees that can cost up to a thousand dollars? ) for them it is a way to put bread on the table, to feed themselves or family, some of them might even enjoy doing this work. I would imagine that it beats sitting on an assembly line installing "x" in an I phone or some other piece of disposable electronic junk (think again of all the stuff filling the toy shelves every Christmas).
 
I would not be too quick to be so judgmental of these things, just my two cents worth, and for those who are engaged in the production of this stuff they probably need the two cents more than I do.
 
Happy new year to all.
 
Michael

Yeah some are stuck for a fortnight in the ice of the Antarctica, but nobody tells about dafi, being confined for 3 weeks in the austrian mountains, far off his beloved ship yard ...
 
But also the mountains sometimes surprise with maritime content, as to be seen with the SMS Trinkstein ...
http://modelshipworld.com/index.php?/topic/349-sms-trinkstein-by-dafi-sos-stone-on-soil-flush-deck-frigate-of-the-austrian-mountain-navy/
 
Also this time dafi had his maritime moments and that was not surprising ;-)
 
There in the deepest valley, where the sun refused to shine, there she was lost, the proud Stixtenstein, lost long ago in the dark days of lost tales, lost in the rigid hardness of the towering mountains beside, just in the wake of the safe harbour of the fortress. Deeply sunken into the elements only the topgallant of her once sky scraping proud masts still was greeting the sea-farers ...
 
... and of course, dafi had to follow immediately his primal instincts, sending himself aloft ...
 

 
... and putting in two reefs of clouds to make the sun shine again :-)
 

 
And now greeting happily as dafi finally learned, that there is no problem to climb up overhanging ratlines like the futtock shrouds and wishes a happy 2014 to everyone!!!

used Wikki to explain one of the todays events   Siege of Cattaro
From Wikipedia, the free encyclopedia     Siege of Cattaro Part of the Napoleonic Wars
View of Cattaro (present day Kotor) from the castle of St. John Date 14 October 1813 – 3 January 1814 Location Cattaro, Illyrian Provinces, Adriatic Sea,
(present-day Kotor, Montenegro) Result Anglo-Montenegrin victory[1] Belligerents  United Kingdom
 Montenegro
 Kingdom of Sicily  French Empire Commanders and leaders  William Hoste
 Petar I  Jean-Joseph Gauthier Strength 800 Marines, soldiers & sailors
One 38 gun fifth rate
One 18 gun Brig
3 gunboats 600 men[2] Casualties and losses 20 casualties All captured [hide] v t e Adriatic campaign
of 1807–1814   Timeline of the Adriatic campaign Lissa 29 November 1811 Pirano Cattaro Ragusa The Siege of Cattaro was fought between a British Royal Naval detachment and Montenegrin forces under Captain William Hoste, John Harper and Petar I Petrović-Njegoš respectively and the French garrison under command of Jean-Joseph Gauthier of the mountain fortress of Cattaro. The siege lasted from 14 October 1813 to 3 January 1814 during the Adriatic campaign of the Napoleonic Wars when the French surrendered.[1] The engagement was fought in the Adriatic Sea for possession of the important fortress of Cattaro.
 
Background[edit]For more details on this topic, see Adriatic campaign of 1807–1814. The Northern walls of the Cattaro fortress Captain William Hoste who famously ordered guns to be hauled up the mountain to besiege Cattaro Cattaro had belonged belonged to the Prince-Bishopric of Montenegro, by 1797 they passed to the Habsburg Monarchy with the Treaty of Campo Formio. In 1805, Kotor was assigned to the French Empire's client state, the Napoleonic Kingdom of Italy by the Treaty of Pressburg, but occupied by Russian troops under Dmitry Senyavin until they left after the Treaty of Tilsit in 1807. Three years later it was incorporated into the French Empire's Illyrian Provinces. Austria declared war on France in August 1813 and by the Autumn the Royal Navyenjoyed unopposed domination over the Adriatic sea. Working in conjunction with the Austrian armies now invading the Illyrian Provinces and Northern Italy, Rear Admiral Thomas Fremantle's ships were able to rapidly transport British and Austrian troops from one point to another, forcing the surrender of the strategic ports, Zara for example had been liberated in December.[3]
Meanwhile Royal Naval Captain William Hoste with his ship HMS Bacchante (38 guns) and a brig-sloop HMS Saracen (18-guns), under Captain John Harper had been given orders for the swift expulsion of the French in the region.[4] They took part in an attack that seized the islands of Hvar and Brač and moved along the coast. Cattaro was next on the target for the British; a body of Montenegrin troops under Petar I Petrović-Njegoš a popular spiritual and military leader of the Serbian Orthodox Church from the Petrović dynasty had surrounded the place. Saracen arrived first just outside Cattaro Bay but it was impossible to sail direct to the main fortress so Harper called on the local inhabitants to tow her along the rocky shore for 3 miles. Hoste in Bacchante arrived soon after with three Sicilian gunboats carrying fifty soldiers and assumed command. The British and Sicilians forced the passage between Herceg Novi and Fort Rosa and secured an anchorage some three miles inside the outer bay. [5]:141
Blockade and Siege[edit]On the evening of the 14th Harper left with two gunboats, the launch and barge of Bacchante and the boats of Saracaen entered the inner bay where he was fired on from the Island of St George. Afterwards heading four miles towards Cattaro he found four gunboats in a state of revolt and took possession of them. He then landed at various places where the local inhabitants were arming themselves against the French and collected volunteer crews for his new captures.[2]
At Perast Hoste found that the locals had taken possession of a French fort with 3 guns which they placed at his disposal, hoisting the English and Austrian colours. At 6am he used these guns, those of his gunboats and the newly acquired gunboats to bombard the island of St. George. Then within 15 minutes the Royal marines and the Sicilians under Captain Harper attacked, captured the island and the French had been driven from their guns and had offered to capitulate. The prize gunboats each had a long 24-pounder in the bow and two of them carried a 12-pounder carronade.[2][5]:137
By now only the main fortress of Cattaro was left and Hoste, Harper and his assortment of allies; British, Croats, Montenegrins and Sicilians surrounded the area. With the help of Montenegrins and the Pro Austrian natives of the liberated Bay of Kotor shores, Hoste found himself in an unpleasant position between the Montenegrins and their support on one hand, and the pro-Austrian population who were unwilling to submit themselves to Montenegrin domination on the other. Hoste made sure of his neutrality and the main objective was the defeat of the French in the region. He knew that politics would eventually play a role if and when the area was under allied control. He also had to make sure that by satisfying the British commissioner in the region Lord Aberdeen that the Austrians were the ones to end up with the spoils.[4] Hoste meanwhile had been ordered to attack elsewhere leaving Harper with the Saracan in charge. Hoste in the next month helped to take Split with troops of the 35th Foot and for the next month a hard blockade was made on Cattaro and the hope of the arrival of Austrian troops. Bad weather had not helped the situation, Hoste after capturing Cavtat further North soon returned to the bay but found no Austrian troops.[5]:137
By early December the local French commander, General Gauthier, had retired to Fort St. John with 600 men.[2] This fort lay on the side of the hill protecting the Western side of the fortified town of Cattaro. Hoste and Harper both agreed that use of the local armed populace would make do for the final stages of the siege. Preparations were made to put batteries all around Cattaro which meant using the top of the hill of St John as a primary position right above the fortress itself. Hoste and Harper ordered the difficult task of scattering batteries down the forbidding slopes of the Cattaro hills using block and tackle. In an "unmilitary manner" after 3 weeks of great exertion by Bachannte and Saracaens seamen in continuous rain an 18-pounder was hoisted to the summit on 23 December, a height of nearly 3,000 feet.[6] Meanwhile Bacchante and the rest of her crew mounted further pieces of ordnance; two batteries of 18 and 32-pounders were added. Hoste despite being ill personally helped the men get the equipment up the slopes of the mountain but further North and South respectively of the fort and the main battery on the slope.[2]
Medal commemorating HMS Bachannte'sbombardment of Cattaro 1814 On Christmas Day once all guns were in position and good weather had returned Hoste ordered the commencement of the bombardment. Fire was opened up from four different points with the 18 pounder above the St John fortress being particularly effective. Saracan and Bacchante were kept out of range by the forts guns until the bombardment started and opened up all they had. Hoste on the 2nd ordered Harper to lead a surprise night time assault. This was not necessary however as on 3 January 1814, when Harper was about to lead an assault, Gauthier offered to surrender. After ten days of shelling and no hope of relief the French surrendered to Hoste under honorable conditions and the British and Montenegrins took control of the fort and the town.[7] After a ten-day siege, the French garrison had no alternative and surrendered on 5 January 1814.[4][7]
Aftermath[edit]The loss on the British, amounting to only one seaman killed, and Lieutenant of marines slightly wounded. In the course of the twenty-day siege, Hoste had counted on the support of Austrian infantry which failed to show up. Hoste signed the articles of capitulation and the remaining French and Italian troops marched out in surrender, after which British troops marched in along with the Montenegrins. Hoste gave the town to the Montenegrin commission under Peter which aggravated Lord Aberdeen but Hoste argued that he had no choice in the matter.[8][citation needed]
Hoste with Bacchante and Saracen after a short rest and recuperation left Cattaro to sail to the fortress of Ragusa where they laid siege to the place in a very similar manner to Cattaro and on the 28th it surrendered.[5]:141 By the end of March all towns and cities had surrendered to the British or the allied rebels that had risen in revolt, leaving the Adriatic in complete allied control with the exception of Corfu. Cattaro was restored to the Habsburg Monarchy of the Austrian Empire by the Congress of Vienna.[9]

The origin of this document is for the protection of health workers issued by the government. Is it 100% true? I do not know, but the idea is not to wait until there are human studies completed with 10,000 peoples, I think that we do not need that much to begin to manage the risk.

It has been over a year since I have worked on my  Sultana. My  hand tremor  which had become progressively worse  over the years had reached the point where I broke more than I made. Lack of  a steady hand and manual dexterity  limited  my abilities and activities.    I chose to abandon my prescription medication since it did not eliminate my tremor and affected my reaction time  and I could not give up driving. Ship modelling became a spectator  activity. I still enjoyed  visiting   MSW, reading and meeting with my good ship modeling buddies here on the island. 
   My dear wife had been taking magnesium  to alleviate  her night time leg cramps.  On Christmas Eve while reading articles on the importance of   Magnesium in our diet she discovered an article which  described dramatic improvements  for people suffering with the inherited condition "essential tremor" . The improvement had been brought about by a daily dose of 500mg. I began taking magnesium supplement there and then Ten days later my tremor has not entirely  disappeared but  my hands , especially the right are steadier than they have been in many years. As my Admiral says I can now eat soup in public!!!  The other day I sat at my bench and tried theading blocks and tying knots using tweezers. I met with repeated success.   I feel I can return to working  on my Sultana and Old Blue.
  I would not normally share  personal medical  information over the internet but   hope that in doing so that any other crewmember suffering with  the same affliction will  benefit from my experience.
 Best Christmas present I ever received.
 Once more I am enjoying the journey and not just watching from the sidelines.
Kip (aka Sawdust)

Thank you all, for your support and kind words.
 
I challenged myself that I wouldn't make another post until I finished the frames.  I didn't think this was very much of a challenge, as I thought it would be four or five hours work to do the half frames.   Now it is ten hours later (where does the time go?) and I can report progress.
 
I spent much of the day in this situation--
 

 
 
Some frames, having been wet and heated, are clamped to set the curvature, while I hold a freshly glued frame in place with my fingers until the glue sets.  The boat is in there, somewhere.
 
 
Here, the last two frames are clamped to set the curve--
 

 
 
I dropped the boat onto my wood floor twice.  The second time I had four clothespins attached, and I was sure some planking would spring loose, but there were no ill effects.
 
Now all frames are done.  I think.  There are a few that draw my eye due to uneven placement.  I don't know yet whether I will adjust them.
 

 
 
In this view they look more uniform--
 

 
 
There is still quite a lot to do on this boat--
 

 
 
Cheers,
Ron

Hello dear friends,

I am very impressed reading your posts, thank you a lot for your attention to my build and kind words. I am sure, there are a lot of stunning shipbuilders at MSW - much better than me, I also draw inspiration from their work and am grateful that can be here with you. Thank you very much for this oportunity.
 
The idea  - to make clear area in the roof  - is very good and I am thinking about it.
 
I have other pics for you, this time my husband took photos, so here are some of them. Now I am preparing the support structure for the roof in rear cabin.
Please enjoy them:
 

 

 

 

 

 

 

 

 

 

 

 
 

The 19’ launch from CC was constructed similar to the longboat but with slight improvements.
It will be fitted out with oars etc. It looks a bit better than the longboat and there might an improvement of the later become necessary.
 
 

The captain inspects the new launch
 
 

Unfortunately the skipper seems to like it and the look in his eye tells me that he would like the longboat to be of the same standard. (In fact you see the bosun already calling the carpenters to work on that. I’m afraid they will be busy elsewhere and the work will end up on my table – as almost every time.)

Other pics:








 
 
Kind regards and Happy New Year to all
Doris

Hello dear friends!
I am very impressed reading your feedback, thank you very much for your appreciation and kind words.
I am also pleased and honoured that my work attracted other women - your wives. I like ship modeling, but there are only few women in our country, who also enjoy this hobby.
Please convey my cordial greetings to your wives.
 
And now what´s new on RC
The main cabin is almost finished; chairs, table and other furniture and decorative items are already in place, I improved baroque clock and now preparing a final decoration ....
 





 
From the process:
 





 
Please enjoy the pics, after finishing the interior I will take a lot of new photos and put them here.

 

I initally did the seats of ease as per the AOTS drawing but, after ribald comments from various MSW members about wet bums in any sort of sea, I redid them in a more traditional way.
 
 

 
the old seats for hardy sailors
 

 
that's better (and drier!)

Hello all and thank you for visiting and your like votes.
 
Today was a bit frustrating.  I tried to cut 1 X 1 mm styrene strips for the deck slats but no matter how hard I tried I couldn't get anywhere with it.  They keep curling and refusing to remain straight.  I gave up and went to making 1 X 1 mm wood strips.  
Yeah I know, it's more labor intensive but the end result was quite satisfactory.  I'll have to go into mass production when it comes time to do the main deck 
Actually, it goes rather swift once I have 1 mm planks cut.  It's then a matter of sanding it smooth and by that time it's about 0. 8 mm, which actually looks a bit nicer.  Then carefully cut the 1 mm strips from it a little over size so I can sand them smooth on the cut sides.
 
I made a few strips to plank the small recessed deck of the cockpit and it came out rather well, just a little cleaning up. 
 
I also had to remake the aft AA gun deck.  I forgot to the side overhang to allow for the gun operation.  Oh well, such is life.  Got to thinking about those dumb deck slats and didn't pay attention.  At least it's a good excuse and I'm sticking with it      Wont do that with the front gun deck though    I'm running low on plywood.
 
So, tomorrow is making the deck slats for the aft gun deck - - - after I come back from the dentist.  We are going to get the stitches taken out and an impression made for the two crowns - - - yippee!   
 

The .8 X 1 mm slats are glued on to the deck in the cockpit or bridge.  Yes, it still needs to be cleaned up  some.  The few rough spots in the front will be removed because the help post will be placed there.  In the starboard front are a few cabinets and some "stuff" on the port side.  That area is also covered with a weather shield so most of the forward slats will not even be visible. 
 

This is a close-up view of the slats.
 

This shows the aft AA gun deck with the overhang I forgot with my first try.  The overhang will have a 1 mm reinforcing strip glued to the underside as well as metal support braces. The area with the vertical supports will have an inner lining, that's why I left decking out between the verticals.  The outside plating will cover it nicely.
The periscope housing is not glued on yet, first the slats to be glued to the deck plates
 
Cheers,