xken

I finished up the ladderways and then added the mooring deck rails.
 
 
 

 
Next I made the mooring deck winches of which there are two styles, as well as left and rights based upon the electric motor location. Here they are set on the plans.

 
Here they are set on the deck with bits and mooring posts. White rope will be added before the winches are glued in place.
 

 
Next I moved on to the bow that has three winches the same as the mooring deck; in addition there are anchor winches and the pictures show "in progress" anchor winches in place on the bow fore deck.

 

 
The anchor chain will index into the hole with the brake arm over the roller and into the deck. Just a great deal of more details and fixtures to add yet. 

Added details to the various decks and then decided to apply the first working color coat of paint. Still no reply from Tom's Modelworks. Does anyone have a phone number for them? 
 
The tower will now be set aside to allow paint to set and wait for pictures of more details from Evan once in dry-dock. Here are some views.
 

 

 

 

 
Now to prime, sand and paint the hatch covers.
 
 

I finally finished up fabricating all the hatches and now they are ready for finishing. They will get painted grey like the main deck. I also have started adding details  to the various tower decks like the swimming pool and additional windows. I have emailed Tom's Modelworks for information regarding the sizes of their railing and inclined ladders and hopefully the will get back soon. Here are some pictures of the completed hatches and tower.

 

 
Here is a color test and I am pleased with the matches. The horizontal tower deck surfaces are Green.

 

 
Now back to hatch finishing and tower detailing. 

Slow going on the hatches and I have been working back and forth on the tower while waiting for glue to set on hatches. The tower is built up in deck layers that press fit together for now. Keeping them separate really helps as I add details as I discover them. Evan is taking the ship for a month in dry dock for refitting, upgrading, maintenance and paint for about a month. That is when he will be sending pictures of more details that are needed. Anyway here are some "In Progress" tower decks. So far the one big challenge was the NAV. deck and getting the windows angled forward using .0208" square framework. I also cut an access panel on the bottom of this deck to add the window glazing later on. The big challenge I see coming are the ladder ways and railing. I have checked Tom's Modelworks railing but they do not provide dimensions on height and stanchion distances. Has anyone out there used their 1:350 three rail railing?
 
Here are various "In Progress" views showing the tower stacked up and the individual decks. You can also see where I am at with the hatches, about 1/3 of the way complete.

 

 

 

 

 

 
Now back to hatches.

The presentation went extremely well and some are now more informed about the various aspects of modelling.
In working on the hatches I first make the sidewalls fitting snugly on the coaming using Midwest #8006 Basswood strips. Then I glue a slightly over-sized 1/32" hatch cover to the sidewall frame while in place and set a small steel block weight on top until the glue sets. This assures a flat cover index to the coaming; the glue while drying can distort the the cover if not weighted down. Each cover is marked on the inside with B(bow) and S(stern) and location P (port) and hatch number from bow. There is enough slight variation in size to make each cover unique.
 
 
 
I bounce back and forth between making hatch covers and the accommodation tower. The tower is being built with individual decks so down the road details can be added much easier than if the tower were one piece. Things like door hatches, ladder ways and rails.
Here is deck "A" which will index on the main deck; the small locator rectangle will have glue added to the center while indexed into the deck and the glue will stick to the main deck and release the deck when the glue is dry providing a tight fitting locator. This will be the foundation for the tower.
 

 
I used a wood strip spacer against the bay wall and masking tape for centering and gluing Deck "A" locator to the main deck.
 

 
Here is a view of the in progress build up of the tower so far. The challenge is adding the indexing locators of each deck to each other with a tight fit. The tower decks will separate from each other to add details later on. Here is a front view.
 
 
 
Here is a rear view showing various ladder way openings. The individual height of each deck is .375" 
 

 
Here is an overall view of where I am at so far. Many more hatches to go.
 

 
Now back to making hatches and decks.   Bring a whole new meaning to "Down the hatch!" 

I have been doing a great deal of fussy work on the bay hatches coaming while waiting for more stock to come from Midwest.  A couple of hundred pieces cut and fitted on edge around the hatch openings. While doing this it came to me that given the tight tolerances needed that I better paint the interior and coaming before fabricating the hatch covers. So after priming, glazing and sanding and fussing I finally was able to paint a Gray in the holds, coaming  and bow mooring deck. At least this will be a working color coat for now and will have ample time to dry and set while waiting for the material to arrive on Wednesday. Tomorrow is my presentation to the local Rotary Club on Model Building which has also occupied some of my time as well.
Here is the first working coat of Gray.
 

 

 

 
Now back to the presentation for now and get ready to make hatches.
 

Next I added the individual bay framework of three bays across the hull. First I added the lateral support beams and then the shorter longitudinal beams. These form the deck support structure with each opening having coaming around them onto which the hatches were located. 
The short beams required notching into the cross beams to have a level surface.
 

 

 
I should mention that when adding the cross members care had to be taken to make sure they were level to each other as added.
 
 

 
Next I started adding the coaming using 1/32" x 1/16" doing the outboard ones first. I drew a pencil line aligning with the existing coaming on the bow section. I laid down 1/4" tape which provided an edge to "bump" the coaming against but also kept any excess glue from the finished surface.
 

 
Once the outboard coaming was set I added the lateral ones fist on one side of the frame surface and allowed the glue to set. This allowed using a spacer when adding the second side to the frame.

 
This shows the using of the spacer.
 

 
Once all the coaming was in place and the glue allowed to set after adding CA to all the outside perimeters the entire frame work was sanded smooth and even.
 

 
Next all the joint gaps were cut carefully with the tip of a #11 blade and filed with a needle file to make sure there was an even spacing. Here is an overall view showing all the bay openings.
 

 
Next will come the tedious process of cutting and fitting of all the hatches. The hatches will form the water tight decking for the containers stowed below them and the surface for the containers open above the deck. I may address some of the accommodation tower to break up the boredom of making over 50 hatches. 
 
 

Patrick and Nils here are the results, Michael welcome aboard. I finished up closing the gap both outside and inside. Then sanded and blended the surfaces using 120 grit dry and then 320 using a block and sanding diagonally across the curves. Primed once again to seal the exposed wood then sanded with 320 grit avoiding to break the primed surfaces back to wood. Then a final prime coat. This will be a working surface until the balance of the construction is completed. This will allow normal scuffing while handling, but will really allow the primer to harden and the wood to set with the primer. Wood does expand and contract over time so hopefully it will set by the time I am ready for the final painting.
Here are various views of where the hull is now. 
 

 

 

 

 

 

 

 
Now to move on and start adding the bay hold openings with coaming, basically extending those that are in place on the bow section. Evan is on his way to the ship today and I am looking forward to getting pictures of many details as his schedule allows.
 

I finished up the ladderways and then added the mooring deck rails.
 
 
 

 
Next I made the mooring deck winches of which there are two styles, as well as left and rights based upon the electric motor location. Here they are set on the plans.

 
Here they are set on the deck with bits and mooring posts. White rope will be added before the winches are glued in place.
 

 
Next I moved on to the bow that has three winches the same as the mooring deck; in addition there are anchor winches and the pictures show "in progress" anchor winches in place on the bow fore deck.

 

 
The anchor chain will index into the hole with the brake arm over the roller and into the deck. Just a great deal of more details and fixtures to add yet. 

John, thank you and yes it is. I finished up the rails and then added the ladder ways until I ran out and have since ordered more of both. I found the best way to fold the rails and ladders was to use small steel blocks that have sharp edges keeping things a crisp as possible. Here are a couple of views of the starboard side of the tower done. This is my first experience with these kind of tiny PE parts. 
 

 

 
While waiting for the additional parts to arrive from Tom's I will start parts for the mooring and forecastle decks.

Well the smoke was only around one day and all is clear now. While waiting for the airbrush paint to show up I painted the bow splash wall and then realized that before adding the rails that it would be easier to locate and paint the tower windows first. I copied the tower face CAD drawing and made a paper location stencil cutting out the windows. Once taped to the front wall I dry dabbed black paint to define the locations and then used strips of blue tape for the final shapes of the windows and painted with a small brush using two light coats.
 
Then the airbrush paint arrived and I then painted the previously primed rails. It has been 45 years since I last used an airbrush, but just like riding a bike it all came back. I glued the top rail in place and then added the top deck, easier to get this rail in place first. Now I am slowly working my way up from the bottom adding the painted rails. I am glad the tower is not glued in place yet, because adding the rails is a tediously slow process to get right.
 
I might also mention that I added the window glazing before gluing the top deck in place. I used card stock for pattern development and then cut out each window as required and once finally fitted was glued in place with tiny wood strips to hold in place on the inside. Glad I built in the bottom access hole just for this purpose. I did have to enlarge the hole for better access.
 

 
This shows the typical taping process used.  
 

 

 

 

 
Now back to adding deck rails.

Finished up the inner walls and container racks and cut the solid hold walls and installed the hold wall in the bow section. One of the challenges I am having is that in the plans provided there are no view drawings, just a great deal of sub components. Evan, showed me where the solid hull walls were located. He goes back to sea on Tuesday and will be taking the ship into dry dock for some serious maintenance and updating and new paint. He will be sending me a bunch of photos to use.
 
Here are two pictures showing the hold walls.
 

 

 
 
I then sanded and fitted the bow section to the main hull just a little bit of fussing to get the three reference points to touch without any pressure to assure a good tight level fit.
 

 
Once fitted I glued the two sections together and once the glue set overnight I then sanded the hull section to match the hull. The bow section plank ends splayed a little which I had thought would happen since they were not glued to anything and required a little sanding to blend before adding the filler plank pieces.
 

 
Here I am adding the filler pieces and here is where cutting the beveled ends comes in handy for a tight fit on the hull section.
 

 
Now back to finishing filling the gap.
 
 

Planking along slowly but surely, just a great deal of cutting, fitting, forming and gluing. I worked both on the outer hull and while waiting for glue to set I cut and fit the rear interior sections. I decided that I will finish as much of the interior before adding the solid walls that define the holds. My son-in-law shared that these solid walls compartmentalize flooding and that the ship could still float with any two holds completely flooded.
First I added the bottom flat piece based upon the tangents of the curves. Next I added the 1/16" thick planking starting at the top and working down from side to side. 

 
I also added gluing surfaces for the front bow section joint area. The gap will be short transition planks that will be filled in once the bow section is added after the hull is primed and sanded. 
 

 
Here I have added the rear portion of the holds interior walls. I am using the 1/32" plywood for the interior walls which really stiffen the hull once the glue is set.
 

 
Once the forward planking was complete I started adding the interior surfaces starting with the flooring and then working up the sides using steel blocks as weights to maintain flatness until the glue set. I am cutting away the braces a bay at a time as I move forward to maintain the structural integrity and strength. I also am staggering the internal and external joints again for strength and not creating a bending point.
The solid hold walls will add even more strength.  
 
 
 
Now back to cutting and fitting. 
 
 

Moved on to adding the balance of the framework and bracing on the walls and the coaming for the hatch openings. I also opened the third and fourth hold openings now that the structure is strong enough with the planking in place.  I carefully drilled and filed the deck drainage holes on the sidewalls. Just a great deal of fussy work with small parts to be cut and fit.
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Here is a closeup.
 

 
Next I located and cut in the anchor openings.
 

 
Next after a final hand sanding and blending I did the first primer spray painting of both the inner and outer surfaces and set aside to dry and set overnight before the next sanding. This is when you find those little bits of gaps that you missed resulting in more glazing putty.
 

 
Now while waiting for paint to set I will move on to planking the rest of the hull. 
 
 

I finished up the ladderways and then added the mooring deck rails.
 
 
 

 
Next I made the mooring deck winches of which there are two styles, as well as left and rights based upon the electric motor location. Here they are set on the plans.

 
Here they are set on the deck with bits and mooring posts. White rope will be added before the winches are glued in place.
 

 
Next I moved on to the bow that has three winches the same as the mooring deck; in addition there are anchor winches and the pictures show "in progress" anchor winches in place on the bow fore deck.

 

 
The anchor chain will index into the hole with the brake arm over the roller and into the deck. Just a great deal of more details and fixtures to add yet. 

beautiful work Ken,
 
Nils

I finished up the ladderways and then added the mooring deck rails.
 
 
 

 
Next I made the mooring deck winches of which there are two styles, as well as left and rights based upon the electric motor location. Here they are set on the plans.

 
Here they are set on the deck with bits and mooring posts. White rope will be added before the winches are glued in place.
 

 
Next I moved on to the bow that has three winches the same as the mooring deck; in addition there are anchor winches and the pictures show "in progress" anchor winches in place on the bow fore deck.

 

 
The anchor chain will index into the hole with the brake arm over the roller and into the deck. Just a great deal of more details and fixtures to add yet. 

Doug, I have not tried that to see if there is any difference; but I am sure that the yellow color of the glue may have so level of tint when applied to brown rope. I have only ever used the white glue for this kind of application. 

Doug, I did not have access to all ship plans, and it appears that the PdN is more the exception than the norm. The 1:35 size would handle the height but would require a little fussing on spacing the ratlines as they are added. Also keep in mind the shroud line spacing can be slightly adjusted by rotating the knot on the lower tabs from left or right to center on the tab.
 
Michael, you need to make a port and starboard set; then the shroud loops can be added by alternating each as needed indexing each as they are added to the mast. Once in place then the deadeye ends can then be addressed. The key is tying the loops to keep them in proper order before removing from the Ratliner.
 
One other thought that I have not tried is painting the lines while still on the Ratliner using either thinned paint in the case of black lines or using a 50/50 mix of white glue and water to stiffen for easier handling once removed. Perhaps Doug could do an experiment to see if it helps any.

I finished up the ladderways and then added the mooring deck rails.
 
 
 

 
Next I made the mooring deck winches of which there are two styles, as well as left and rights based upon the electric motor location. Here they are set on the plans.

 
Here they are set on the deck with bits and mooring posts. White rope will be added before the winches are glued in place.
 

 
Next I moved on to the bow that has three winches the same as the mooring deck; in addition there are anchor winches and the pictures show "in progress" anchor winches in place on the bow fore deck.

 

 
The anchor chain will index into the hole with the brake arm over the roller and into the deck. Just a great deal of more details and fixtures to add yet. 

I finished up the ladderways and then added the mooring deck rails.
 
 
 

 
Next I made the mooring deck winches of which there are two styles, as well as left and rights based upon the electric motor location. Here they are set on the plans.

 
Here they are set on the deck with bits and mooring posts. White rope will be added before the winches are glued in place.
 

 
Next I moved on to the bow that has three winches the same as the mooring deck; in addition there are anchor winches and the pictures show "in progress" anchor winches in place on the bow fore deck.

 

 
The anchor chain will index into the hole with the brake arm over the roller and into the deck. Just a great deal of more details and fixtures to add yet. 

I finished up the ladderways and then added the mooring deck rails.
 
 
 

 
Next I made the mooring deck winches of which there are two styles, as well as left and rights based upon the electric motor location. Here they are set on the plans.

 
Here they are set on the deck with bits and mooring posts. White rope will be added before the winches are glued in place.
 

 
Next I moved on to the bow that has three winches the same as the mooring deck; in addition there are anchor winches and the pictures show "in progress" anchor winches in place on the bow fore deck.

 

 
The anchor chain will index into the hole with the brake arm over the roller and into the deck. Just a great deal of more details and fixtures to add yet. 

I finished up the ladderways and then added the mooring deck rails.
 
 
 

 
Next I made the mooring deck winches of which there are two styles, as well as left and rights based upon the electric motor location. Here they are set on the plans.

 
Here they are set on the deck with bits and mooring posts. White rope will be added before the winches are glued in place.
 

 
Next I moved on to the bow that has three winches the same as the mooring deck; in addition there are anchor winches and the pictures show "in progress" anchor winches in place on the bow fore deck.

 

 
The anchor chain will index into the hole with the brake arm over the roller and into the deck. Just a great deal of more details and fixtures to add yet. 

I finished up the ladderways and then added the mooring deck rails.
 
 
 

 
Next I made the mooring deck winches of which there are two styles, as well as left and rights based upon the electric motor location. Here they are set on the plans.

 
Here they are set on the deck with bits and mooring posts. White rope will be added before the winches are glued in place.
 

 
Next I moved on to the bow that has three winches the same as the mooring deck; in addition there are anchor winches and the pictures show "in progress" anchor winches in place on the bow fore deck.

 

 
The anchor chain will index into the hole with the brake arm over the roller and into the deck. Just a great deal of more details and fixtures to add yet. 

I finished up the ladderways and then added the mooring deck rails.
 
 
 

 
Next I made the mooring deck winches of which there are two styles, as well as left and rights based upon the electric motor location. Here they are set on the plans.

 
Here they are set on the deck with bits and mooring posts. White rope will be added before the winches are glued in place.
 

 
Next I moved on to the bow that has three winches the same as the mooring deck; in addition there are anchor winches and the pictures show "in progress" anchor winches in place on the bow fore deck.

 

 
The anchor chain will index into the hole with the brake arm over the roller and into the deck. Just a great deal of more details and fixtures to add yet.