donrobinson
-
Posts
1,909 -
Joined
-
Last visited
Reputation Activity
-
donrobinson got a reaction from Elijah in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Robert again I must apologise for missing your post, I don't know what my problem is. Good news is that I have pulled it off it's resting place and I am just refreshing myself as to what steps are required to start again, Soon my friend soon
-
donrobinson got a reaction from Elijah in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Hello Robert, Thanks for stopping in. I just noticed your comment so I apologise for not replying sooner. Welcome to MSW, you will be thrilled with this forum it is full of friendly and knowledgeable people who are willing to share their tips and tricks. Having heard you mention the Stefano, do you have the kit? It is a great kit and will make into a beautiful model. I have been a little slow on her but I promise I'll get working on her soon. You may have just given me enough of a "kick in the butt" to get back at it.
-
donrobinson got a reaction from Elijah in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Sorry about that I clicked the wrong button too soon.
So this how the last posting goes: First picture is showing where to trim sail, second picture is showing the tape I used for the hems, third picture is showing after being trimmed and the forth is showing the wire that was inserted into the outside edges.
Ok, now that I got my mind together:
Sail hemmed with the iron on tape
Marking holes to sew on bolt rope
Kringles made from serving some wire then shaping on a dowel
Completed sail, still needs the little ropes at the top ironed, what is the name for these ropes?
And up next is to make a couple parrels
Have a Good Day everyone and Thanks for all the likes and comments
-
donrobinson got a reaction from Elijah in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
-
donrobinson got a reaction from MESSIS in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Thanks Bob and Ian.
Bob:Man I hear you on that one
Ian: I will try that next time, worth a try. Thanks
The wrinkles were driving me crazy, so I undid the sheet lines allowing me to hold the sail, then I painted the sail with water then using my portable ironing board( !/2" x 4" x 8" piece of basswood wrapped in dish cloth) I carefully ironed again avoiding the seams. Looks much better now.
I have lived my whole life hardly ever ironing clothes and I'll wear clothes that have sat in the dryer for a week and don't worry about it. Now here I am spending an hour of my life on the edge of going for a drink and ironing a sail. What is it about this hobby?
Anyway here are some new pictures:
-
donrobinson got a reaction from Elijah in Halifax by rafine - FINISHED - The Lumberyard - 1:48 - semi-scratch schooner
Looks like it must have been hours of meticulous work but well worth it as it looks tremendous
-
donrobinson got a reaction from captgino in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Hello All, Thanks for visiting, for all the likes and the awesome comments. Well I have the stern area completely finished with the sail, all rigging and rope coils also did a little clean up. I will say that installing sails is lots of work, and there is only three of them, they are starting to grow on me. I would say, though, if you are thinking about sails to start with a fore and aft craft as the rigging is a lot less complex and it will give you a taste to whether or not you will enjoy installing sails.
Enough with the oratory, here are some pictures of what's been going on:
The end is getting closer, next up is the fore sail and finish off the bow area. The next couple of days will be spent on the Stefano and another project so I'll see you soon.
Thanks Again
-
donrobinson got a reaction from Beef Wellington in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Good Morning all, well it's back to work Tuesday(in the shipyard that is!) and I have some progress to show. First of all a big Thanks for all the likes and comments. I've been busy with sails lately and the incredible amount of work they take, that's my excuse for such a small update!!
Here I am making a zip seizing to be used for the corner re-reinforcements of the sprit sail. I used .75 mm rope wrapped around a #52 (approx 1 mm) drill bit then coated with diluted Weldbond glue. Once dry I used a razor blade to cut one segment off at a time then installed in the sail.
Here is the finished sail, wires were installed into the two outside edges to help aid in shaping later on
A close up showing the corner reinforcement, a detail that won't be noticed but something I wanted to try. The outside diameter of the ring is approximately 3 mm.
The traveller, hooks were hand made and the ends have since been painted
Here is how she looks, it does not look this wrinkled in real life. I will say, though, never ever ever wash and dry sails it does not end up well!!
I have started the other two sails, just need to attach the spars to them and they should be ready to install.
You all have a Good Day
-
donrobinson got a reaction from Elijah in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Thanks so much Bob and EJ for your comments, and to all those for the likes
-
donrobinson got a reaction from Elijah in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Hello All, Thanks for visiting, for all the likes and the awesome comments. Well I have the stern area completely finished with the sail, all rigging and rope coils also did a little clean up. I will say that installing sails is lots of work, and there is only three of them, they are starting to grow on me. I would say, though, if you are thinking about sails to start with a fore and aft craft as the rigging is a lot less complex and it will give you a taste to whether or not you will enjoy installing sails.
Enough with the oratory, here are some pictures of what's been going on:
The end is getting closer, next up is the fore sail and finish off the bow area. The next couple of days will be spent on the Stefano and another project so I'll see you soon.
Thanks Again
-
donrobinson got a reaction from CaptainSteve in Barque Stefano by donrobinson - MarisStella - 1:63
Hello All, Thanks for your comments, likes and for stopping by
This is Barque Stefano week for me so I will show you some progress from this morning
Today was bow and stern filler blocks, the kit supplies these in a block that is partially laser cut I finished cutting mine with my scroll saw. The stern filler block requires you to glue three 20 mm thick pieces together, then shape accordingly. The top of the filler block rises to the stern to allow for the planking or madiere, this rise is approx. 7-8 mm. This should be done first, the next profile can then be made by measuring down approx 20 mm from this edge. The last profile is made by tracing the outline of the last bulkhead from the fore side.
Blocks cut from blank
Showing the rise of filler block and how planking will fit
Showing the formed blocks, the red marker is just added to better see the lines
Stern block attached
The bow blocks are much easier to make and follow the same principle, marking the profile lines and shaping
This last picture is just to show the lines of the hull, started to fair the starboard side to show how things should meet up. Still required are two small pieces of filler on either side of bow, then start fairing tomorrow. Ignore gap on starboard side, that was fixed. Tools used were belt/disc sander, dremel and sandpaper.
Have a Good Day
-
donrobinson got a reaction from artitec3 in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Hello All, Thanks for visiting, for all the likes and the awesome comments. Well I have the stern area completely finished with the sail, all rigging and rope coils also did a little clean up. I will say that installing sails is lots of work, and there is only three of them, they are starting to grow on me. I would say, though, if you are thinking about sails to start with a fore and aft craft as the rigging is a lot less complex and it will give you a taste to whether or not you will enjoy installing sails.
Enough with the oratory, here are some pictures of what's been going on:
The end is getting closer, next up is the fore sail and finish off the bow area. The next couple of days will be spent on the Stefano and another project so I'll see you soon.
Thanks Again
-
donrobinson got a reaction from Beef Wellington in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Thanks Bob and Ian.
Bob:Man I hear you on that one
Ian: I will try that next time, worth a try. Thanks
The wrinkles were driving me crazy, so I undid the sheet lines allowing me to hold the sail, then I painted the sail with water then using my portable ironing board( !/2" x 4" x 8" piece of basswood wrapped in dish cloth) I carefully ironed again avoiding the seams. Looks much better now.
I have lived my whole life hardly ever ironing clothes and I'll wear clothes that have sat in the dryer for a week and don't worry about it. Now here I am spending an hour of my life on the edge of going for a drink and ironing a sail. What is it about this hobby?
Anyway here are some new pictures:
-
donrobinson got a reaction from mtaylor in Ropewalk
I have the Domanoff planetary ropewalk and after some practice I'm finally making some decent rope. It works very well, although,it does take some time to make rope especially when making larger ropes requiring multiple threads. The rope is not as good as Chuck's but that maybe due to the fact he uses a cotton/linen blend where as I have only used cotton which results in a much "softer" rope. Even though I went through literally thousands of meters of rope getting a decent product(could be mainly that I am a slow learner) I would recommend this product to those that are not inclined to build their own and Alexey does offer great customer service.
-
donrobinson got a reaction from Seventynet in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Thanks so much Bob and EJ for your comments, and to all those for the likes
-
donrobinson got a reaction from Canute in Ropewalk
I have the Domanoff planetary ropewalk and after some practice I'm finally making some decent rope. It works very well, although,it does take some time to make rope especially when making larger ropes requiring multiple threads. The rope is not as good as Chuck's but that maybe due to the fact he uses a cotton/linen blend where as I have only used cotton which results in a much "softer" rope. Even though I went through literally thousands of meters of rope getting a decent product(could be mainly that I am a slow learner) I would recommend this product to those that are not inclined to build their own and Alexey does offer great customer service.
-
donrobinson got a reaction from CaptainSteve in Barque Stefano by donrobinson - MarisStella - 1:63
Good Morning All, I was walking down the hall yesterday and seen this guy sitting there looking lonely so I thought it was time to bring him into the workshop and do a little work.
So here is how he looked
Then four hours later
And here is a shot of the instruction booklet and part of the list to follow, the check marks are showing what is completed so far. Quite impressive considering this was started over a year ago. NOT!! Hopefully the pace will pick up now that my Trabakul is nearing completion.
Have A Good One
-
donrobinson got a reaction from Old Collingwood in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Thanks so much Bob and EJ for your comments, and to all those for the likes
-
donrobinson got a reaction from mikiek in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Hello All, Thanks for visiting, for all the likes and the awesome comments. Well I have the stern area completely finished with the sail, all rigging and rope coils also did a little clean up. I will say that installing sails is lots of work, and there is only three of them, they are starting to grow on me. I would say, though, if you are thinking about sails to start with a fore and aft craft as the rigging is a lot less complex and it will give you a taste to whether or not you will enjoy installing sails.
Enough with the oratory, here are some pictures of what's been going on:
The end is getting closer, next up is the fore sail and finish off the bow area. The next couple of days will be spent on the Stefano and another project so I'll see you soon.
Thanks Again
-
donrobinson got a reaction from Robin Lous in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Thanks so much Bob and EJ for your comments, and to all those for the likes
-
donrobinson got a reaction from popeye the sailor in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Thanks so much Bob and EJ for your comments, and to all those for the likes
-
donrobinson got a reaction from EJ_L in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Thanks so much Bob and EJ for your comments, and to all those for the likes
-
donrobinson got a reaction from md1400cs in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Hello All, Thanks for visiting, for all the likes and the awesome comments. Well I have the stern area completely finished with the sail, all rigging and rope coils also did a little clean up. I will say that installing sails is lots of work, and there is only three of them, they are starting to grow on me. I would say, though, if you are thinking about sails to start with a fore and aft craft as the rigging is a lot less complex and it will give you a taste to whether or not you will enjoy installing sails.
Enough with the oratory, here are some pictures of what's been going on:
The end is getting closer, next up is the fore sail and finish off the bow area. The next couple of days will be spent on the Stefano and another project so I'll see you soon.
Thanks Again
-
donrobinson got a reaction from Seventynet in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Hello All, Thanks for visiting, for all the likes and the awesome comments. Well I have the stern area completely finished with the sail, all rigging and rope coils also did a little clean up. I will say that installing sails is lots of work, and there is only three of them, they are starting to grow on me. I would say, though, if you are thinking about sails to start with a fore and aft craft as the rigging is a lot less complex and it will give you a taste to whether or not you will enjoy installing sails.
Enough with the oratory, here are some pictures of what's been going on:
The end is getting closer, next up is the fore sail and finish off the bow area. The next couple of days will be spent on the Stefano and another project so I'll see you soon.
Thanks Again
-
donrobinson got a reaction from DocBlake in Trabakul by donrobinson - FINISHED - MarisStella - 1:32 scale
Hello All, Thanks for visiting, for all the likes and the awesome comments. Well I have the stern area completely finished with the sail, all rigging and rope coils also did a little clean up. I will say that installing sails is lots of work, and there is only three of them, they are starting to grow on me. I would say, though, if you are thinking about sails to start with a fore and aft craft as the rigging is a lot less complex and it will give you a taste to whether or not you will enjoy installing sails.
Enough with the oratory, here are some pictures of what's been going on:
The end is getting closer, next up is the fore sail and finish off the bow area. The next couple of days will be spent on the Stefano and another project so I'll see you soon.
Thanks Again