Jump to content
New Publication - Ship Modeler's Handbook - Temp out of stock ×

RGL

Members
 View Profile  See their activity

  • Posts

    5,308

  • Joined

  • Last visited

 Content Type 

Everything posted by RGL

  1. RGL
    Look up North Star Models turnbuckles and eyelets.
  2. RGL
    Couple of Australian flags, railings to go.
  3. RGL
    Rigging based on the box art, I’m just not going to make it complicated, a couple of flags to go.
  4. RGL
    Ships boats and carley floats done, rigging next.
  5. RGL
    The kit provided some PE chain, which crosses over on the capstan which does not make sense. A few photos back there is one of the anchor deck where 1 chain goes around the capstan and 1 is lashed. I used aftermarket RN anchors cut so I could actually fit them in, tied them to rusty chain, wrapped one around the capstan and dogged 1 to the deck, there is some CA shining which I’ll hit with matte varnish at the end.
  6. RGL
    The barrels are probably a bit too long but it was available in spares and not plastic, I think that there was probably only 2 paravane a on the stern not 4, as it is just too busy and the crane is probably a bit too big but I like them. The funnels/ vents down the sides are resin spares and probably about 1 to 1.5 mm too highly, but once the railing goes on it won’t matter. I imagine the rear rear cannon would be a broadside weapon or if being chased.
  7. RGL
    Guns, vents, paravane sand winches, the back deck is soobusy the machine guns won’t fit. Bridge equipment and signal lights. Liferafts, liferings and railings to go.
  8. RGL
    All the ladders added, stays added to the masts as per the plans. Catching up Cog.
  9. RGL
    The superstructures added
  10. RGL
    Popeye is catching up very quickly. The masts are now stepped, and I threw in a ship’s bell. Just have to rig them now, but just the stays, the upper stuff will come later.
  11. RGL
    Small soft brush, only needs a tiny bit.
  12. RGL
    No, it’s for oil. The secondary bridge, about as small as o can manage. The photo is from WW2 with a seized Italian gun as AA
  13. RGL
    The first of the rigging, stays for the funnels and the davits. I also added a few scuttles / Fuel caps beside the aft funnel which are on the plans
  14. RGL
    I just did a bit of weathering to the deck with pastels, burnt umber for the brown deck, black soot for the focsle, metal parts, and funnels, then salt and rust for the focsle. Now to rig the funnels and davits.
  15. RGL
    Steam winches, paravane amidships, torpedo tubes and davits (about the only thing I used from the WEM set as they actually have some details. The torpedo tubes are probably no where near as good as what Cog is using from Shapeways but shipping is worth more than the piece. They still come up nicely
  16. RGL
    The old B&W photos make it look white really. I think it’s actually lighter than it’s supposed to be but I like it.
  17. RGL
    And the deck stuff starts
  18. RGL
    Great to see your start Popeye
  19. RGL
    I may have destroyed a couple of sprue cutters that way. As such, never again!!! i spent the entire day priming, then pre shading, and base grey coat. Nothing worth photographing. Light grey coats to go then pinwashes and a light dry brush, and start gluing again.
  20. RGL
    Hehehe. Its easier to fix fix if it’s paint and not plastic that’s cut.
  21. RGL
    Yes, the PE that is fairly useless to me. So overpriced. You don’t need need to make a tool, just a couple of rattle cans. Once you get it about .1mm thick you can just press in the hull plates. Much easier and safer than cutting plastic.
  22. RGL
    What’s a G type? Is Mushasi getting finished? Sang Yan Park is planning to release a Soviet destroyer upgrade from Infini Models late this year ( I hope) so that would be the third of the Russians.
  23. RGL
    I reckon it’s because the water goes down the sink with the opposite spin that causes the Vajello not to work down here. Ive just picked up the next build which is going to be an exercise in hull grunge. What resin did you order? I’m thinking a few days on the airbrush will have me ready for weathering.
  24. RGL
    Are you using any references?
  25. RGL
    So excluding railings, a fair bit of detail to go.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...