Jump to content

RGL

Members
 View Profile  See their activity

  • Posts

    5,172

  • Joined

  • Last visited

 Content Type 

Everything posted by RGL

  1. RGL
    I’m going to pause this build now as I’m going to need to wait for technology and design to catch up. When Simon from Micromaster finishes up his new designs for a quad Pom Pom, Single Pom Pom and splinter matress I can finish them.
  2. RGL
    Secondary bridge and searchlight platform (the searchlight has been eaten by the carpet monster FFs).
  3. RGL
    So I still want to add some cabling but the fore mast pretty much done. The WEM upgrade comes with the lattice mast but everything else is inaccurate compared to the photos so a bit of a bash was required.
  4. RGL
    So, status to date and
  5. RGL
    The instructions for the MG platform between the stacks, as on Zulu, a bit of Cut and Paste, allowing for the open ventilation shafts underneath. My plan is to put splinter shields on top of the plastic card. The kit bits are way too thick,
  6. RGL
    Dark magic this
  7. RGL
    And a platform that had to be fabricated for the twin 20mm’s that had been added to the Eskimo by then
  8. RGL
    Rear superstructure, trying to make it a bit more accurate
  9. RGL
    Happy to see a massive plastic model here mate! Welcome. Any advice freely given (no matter how rubbish it may be).
  10. RGL
    Last of the bridge details added before painting (later) and addition of fittings. I’m pretty happy with where it is
  11. RGL
    Thanks, I’ve done up some sidelights and I want to do up some bridge details and the other stuff can then be added later. im nagging Simon at Micromaster to make some splinter mattresses as all RN ships had them
  12. RGL
    No idea mate, but you can also glue a cleaned up piece to a piece of wood or plastic (like putting it back on a sprue) and painting it then cutting it off again
  13. RGL
    Cool!
  14. RGL
    Back to HMS Zulu for a while.
  15. RGL
    Handrails, doors, and some Micromaster bits
  16. RGL
    Closed In , now some detail work
  17. RGL
    There’s a really good shot of Eskimo with her bow blown off which shows a lot of close in detail, such as the wind baffles. These are quite easily replicated with card. I now need to put a wall in below the searchlight platform
  18. RGL
    So the standard fit out from the Trumpeter kits show an empty gun position for Zulu (I’m still awaiting a single 2pdr to go here) the twin 20mm cannon that goes in this position on Eskimo (there are 4 on the ship) and the modified gun tubs
  19. RGL
    Yes, new mast, from the same footage in 1944. An obvious refit
  20. RGL
    So I’m back on the Eskimo. Amazing when you keep searching, you keep seeing things that weren’t there before. The twin 20mm’s added by 1944 (there were 4 of them) went on the lower bridge wings (replacing twin vickers machine guns) and abaft the quad Pom Pom. The forward ones had a pedestal beneath it replacing metal pillars with bracing. The kit is pretty much an exact replica of Zulu. A fair bit of bashing is required.
  21. RGL
    Tape or blue tack, as pretty much everything has to be airbrushed
  22. RGL
    Cool!
  23. RGL
    Aaaand finished. Compared to a WW1 German torpedo boat and beside a big brother from ww2 and parked in the digital graveyard
  24. RGL
    I used a few shades Of lighter grey then a white overspray and a neutral grey filter to dull it down.
  25. RGL
    Nearly done, rust to go

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...