Jump to content

RGL

Members
 View Profile  See their activity

  • Posts

    5,172

  • Joined

  • Last visited

 Content Type 

Everything posted by RGL

  1. RGL
    Now this is a photo of her I’ve never seen before
  2. RGL
    Mast stepped (I used proper yards, the instructions say 1 but the photos show 2), guns added,
  3. RGL
    And another shot, wouldn’t want to be working these in an open ocean
  4. RGL
    So I just found 2 photos from Navtechlife.com of Claymore ,
  5. RGL
    So throwing some stuff on the boat, guns, lifeboats, mast, ladders and railings to go.
  6. RGL
    Looks amazing. Yes the chain is waaay too big. In 1/700 the YX chain would be too big as well as they’re pretty much battleship chains. I’d just use the pe ones painted dark blue and dry brush Dark brown then a rust wash.
  7. RGL
    It’s the middle of winter here, it’s my 16 yo in the water mind you not me
  8. RGL
    And sometimes you just need to do something different
  9. RGL
    A good set of micro files? A nice set of U-Star Tweezers if you’re going to do PE. If you are going to use PE use superglue, a box of acupuncture needles to apply CA glue and a cigarette lighter to burn off CA build up
  10. RGL
    For a drill get a Pin vise, don’t use a Dremel or it will melt. The list of tools is never ending.
  11. RGL
    Nice.
  12. RGL
    Love it.
  13. RGL
    I just looked at that link, old mate pretty much did it perfectly.
  14. RGL
    Thanks OC. so the deck is down, focsle area done up, just need to rig the anchors then I can rig the railings. The kit has hard rails and don’t really match the line drawings.
  15. RGL
    I’ve hit middle age eyes in the last few years. Live the optivisor and can’t imagine going to 1/700. So brave!!!
  16. RGL
    Now on the base. I’m going to add the rigging points and metal platforms next then I can start rusting her up. I did a grey overspray on the lower hull to represent a build up of grunge.
  17. RGL
    Grunging time. Add thick streaks and then thin them.
  18. RGL
    The propellers, the instructions state to add some shafts then onto flat PE Propellors that would be free floating. using a brass bollard and offcut pe I’ve made some support struts . I added a brass spinner from a 1/350 aircraft propeller to the end of the PE props to make them look more authentic. ive made a start on the PE structures whilst I was awaiting the pain to dry.
  19. RGL
    Chris Meddings, the maker of the kit sent me his line drawings. Lots of extra details to add now in particular to the focsle. Lots of little holes to drill and add rigging points for the anchor chain, add a anchor Davit on each side and a fairlead.
  20. RGL
    So the kit comes with a little stencil for the ship name (TR for Trident). the boot stripe is about 2mm so it’s taken a bit of work to get it right. Now for some weathering. I put in hull plates but they’re hard to see.
  21. RGL
    So primer coat, boot strap added then the rudder (PE) and shafts. Lower hull will be green
  22. RGL
    That’s what a Jamie from Sovereign Hobbies says too. Unfortunately it’s the same for KGV which I refuse to repaint
  23. RGL
    I think it’s going to be about the same size as Vendetta. I’m wondering about doing some Tin canning on her was well.
  24. RGL
    I do have a rather large French Battleship in the digital graveyard
  25. RGL
    I want to do her in white livery which is a nice break from grey. These shots courtesy of a French website

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...