Jump to content
Welcome to our new sponsor - Engine DIY. See banner ad on Home page. ×

Ondras71

Members
 View Profile  See their activity

  • Posts

    417

  • Joined

  • Last visited

 Content Type 

Everything posted by Ondras71

  1. Ondras71
    Hi guys and thank you. In the end, the boat went to the Czech Championship, it returned unharmed. In the ship components category "C3D", the points went to the gold medal.😲 Satisfaction. But I miss the atmosphere of the competition and meeting with similarly strange people..😭
  2. Ondras71
    I started making "belaying pins".. I provided the model with mast stumps and some belaying pins to participate in the competition.. ..but this affected me.... So I'm sitting at home...😭
  3. Ondras71
    Finally placed the main guns below deck. Blackening is alchemy, take your time, 1:25 an ideal solution that does not stain..😵 Tangled end of rudder belay rope.. Mounted guns on deck.. Current status..
  4. Ondras71
    Thanks for the likes.. The model is placed on a baroque stand... Cannon goals set up. Created an imitation of cable entanglement.. The first cannon goals in place.. And arranged more..
  5. Ondras71
    Back deck wall done.. After waxing, placed on the gun deck, secured with pegs in two wheels.. Restraint ropes created.. ..and guns placed on deck.. Add hoists and place cannons below deck..👌
  6. Ondras71
    Thank you shipmodel. Bad translation. This is just below deck. O.
  7. Ondras71
    Thank you very much Gary! I created the wheelhouse.. I started making ropes from thin Sajou threads. On the old ropewalk with a low-quality ride, the rope made mistakes for me. So I modified the entire ropewalk.. And now it's about something else!! The hoists of the main mast have been completed with new ropes, they will now go below deck.. Now I can close the wall of the rear superstructure..
  8. Ondras71
    Made stairs.. Ramshead pulleys made for Halyard Knightheat posts.. Next work aft deck wall.. And a supply of Small staghorn harnesses..
  9. Ondras71
    Hello Dave. I'll be happy to watch, I like Carolina. Your start looks very honest..!!
  10. Ondras71
    Decorative S attached to the stern.. Work on the inner railing, the supporting centers of the posts made of steel pins.. Waxed.. Capstan already placed under the deck, using a previously created jig.. Railing done..
  11. Ondras71
    Flagpole turned, flagpole halter placed on ship. I reached maximum torso height.. I roughly created decorative ornaments for the top of the stern.. And then came the inner railing. Columns of the lower part.. Secured with three pins for strength..
  12. Ondras71
    Completed poop deck.. Created a bench above the mirror.. Also the flagpole and the inner railing..
  13. Ondras71
    Greetings to all Doris fans. The good news is that Doris is slowly returning to Czech forums. 💐I believe that you will soon welcome her here as well..♥️ https://www.modelforum.cz/viewtopic.php?f=177&t=110763&start=1605
  14. Ondras71
    Thank you so much Rick, I appreciate your words! The last part to be painted, the inside railing of the foredeck.. The wall of the back castle.. Added rear side bar for Belaying pins.. I cover the last plywood part, the roof of the rear castle..
  15. Ondras71
    Thank you very much for the like! I provided the rear deck with all the pins.. Added Kevel blocks to the rear deck.. And the final spray, the inner railing.. Cleaned the holes in the gretings and waxed the rear deck..
  16. Ondras71
    I was very happy to find your next build here. I will be happy to watch. Thank you for continuing..
  17. Ondras71
    Thank you very much Patrick!! I lined the back deck with lapped boards.. Deck with gratings ground.. Deck sanded.. View below the rear deck..
  18. Ondras71
    Thank you for the like! I made blocks for cannon hoists. Training kept under deck.. Hoists .. Cannons arranged and placed in the transport position..👍 Glued grating, these I have to grind with the deck, to this created a "box" that prevents contamination of works.. The base of the aft deck..
  19. Ondras71
    I'm learning to work with a ropewalk. It's really about testing. Catch weight weights and skill.. The first ropes and anchor cable Gutermann ..💥 First I have to create ropes for the cannons, which will already be placed under the aft deck. I study in detail and only now do I understand that the "rope" is braided only once from 3x32 threads .. Then the anchor "cable" is braided from three prepared ropes.. After the first twisted ropes, I confirmed that the Dutch ships had, against the English, all the ropes turned to transport, even stays. This is confirmed in publications by Ab Hoving, such as "The Ships of Abel Tasman" and on replicas of Batavia and Duyfken..😱 So I used the table of the Czech modeler marsalva, to whom I would like to thank very much for the information, because the system dropped my trial and I don't have to invent the invented ones, For a 3x1 rope, which is braided from three clockwise threads, the threads must first be turned to the left, elongated by 3.6 percent and then pre-spun to the left to form a clockwise thread. During this, I ran the threads several times between my fingers and the resulting cable, which is more hairy, went through the flame of the candle and the resulting cable P 3x1 with a thickness of 0.37 mm is great !!💯
  20. Ondras71
    After a week's sick leave, I finally completed my ropewalk. I only bought the Czech "Merkur" set with wheels and a motor, the others are various remains, the other side is still driven by a cordless drill .. It works ..🛠️ After a short training "IT" really creates ropes !! So far, I'm training on the remnants of threads ..💥
  21. Ondras71
    Thank you very much for the nice words. I try to reach the maximum, it's slow. Ondras Fittings finished, next time I'd rather create etched parts, this is hard work.. To be on the safe side, I provided the bottoms of the wheels with pin holes for a firm placement on the deck.. Cannons on the main deck done..👍
  22. Ondras71
    Cannon trucks folded, complete with side fittings, waxed.. Test of cannons on the upper deck..
  23. Ondras71
    I measured Dutch artillery trucks.. Production of artillery trucks.. Artillery trucks folded .. Ready material for ropewalk..
  24. Ondras71
    Thank you for the like..👍 I finished the cannon barrels on the upper deck. They have been ready for 2.5 years...😱 I placed Large staghorn and Level blocks on the main deck..
  25. Ondras71
    Thanks for the like!👍 The lower capstan is glued.. I finished the upper capstan and added a rope pulley to the Halyard knighthead post against the plan Main top rope.. Before gluing the deck beams, I adjusted the visible places at the holes on them, the grating do not have a scale force.. I also create Large staghorn and Kevel blocks, these are completed according to Zehaen's plan.. Rear grating shaped ..

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...