Estoy_Listo

Here it is.
 

Impressive work. I've been following from the start, and I must say that you've done yourself proud.  

I see these pictures and think, Man, I've got to build this. 

Ok!!!  Made my own path to the bibs and cross trees. Used the kit blocks for lower part but glad I made the mast caps myself. 
 
Nice result. Will paint tomorrow!!!
 
Moving on!

Main Hatch/Companionway
 
Thanks for the comment Russ, and to others for the likes and looks.
 
This week's progress was completion of the main hatch/companionway.  Sorry, I did not take any pictures during the process...nothing special, just cut pieces out of 1/16th or 1/32nd mahogany sheets, glue'em together, stain and finish.   The kit supplied two small brass nails to use as door knobs, I used some of the copper tape to create hinges, then blackened both.  I also put some blackened copper on the rails for the hatch to slide back on.
 
Next up is the aft hatch and cockpit and rudder.
 

I agree 100%. I have just started planking mine and find the stern is difficult to get right. I'll be watching to see how yours turns out.

I painted and glued on the knees and it is time to work on the rudder. I cleaned it up then realized I finally have to place the frieze, especially on the transom. I printed out the PDF from Chuck's revision and gave it a couple thin coats of hair spray for protection. Then I cut it out and use some adhesive spray to place it on the boat. I taped a cutout of the transom frieze on so I could paint around it. Then I completed the metalwork on the rudder with gudgeon and pintle. I also shaped the handle. Before I can continue, I have to figure out the best way to draw the waterline on the boat.

The original poster has said that this is his first ever model and as such is obviously new to boat building.  Its very difficult to get the precision of build that more experienced builders get as this takes time, patience and many mistakes along the way.  To say that major re-working is a necessity on the first build is a bit off putting for a new builder.
 
Peter Y its ok to use filler but leave the surface rough so that your adhesive has something to bond onto.  As your building skills get better you will require very little filler indeed if any but it is needed now to get the shape that you want.  I personally would use a two pack filler in your case such as easypol - I hope this helps mate.

Righteous workshop! This may be your first ship build, but you're no beginner.  Me on the the other hand...  I'm learning a lot just by watching.  I'll follow along. 

Righteous workshop! This may be your first ship build, but you're no beginner.  Me on the the other hand...  I'm learning a lot just by watching.  I'll follow along. 

Righteous workshop! This may be your first ship build, but you're no beginner.  Me on the the other hand...  I'm learning a lot just by watching.  I'll follow along. 

Righteous workshop! This may be your first ship build, but you're no beginner.  Me on the the other hand...  I'm learning a lot just by watching.  I'll follow along. 

I guess I'd better get to building as the workspace is way too clean

 
Going to use my magnetic building board for hull framing/planking

I fixed the caprail and glued on the knee. I also put in the mast bracket and installed the belay pins. Next I had to problem solve the dilemma of the windlass. I couldn't figure out a way to make perfect square holes, so I just drilled the the approximate size and cut the corners out with an Xacto knife. Had some trouble installing it but was finally able to do it. 

you have sawdust under your nails now........can't call ya a newbie anymore      these models aren't to be built in a week end.......they take time,  and that's the beauty of them.   I recall in my younger days,  when I could do plastic car and plane models in a week.   where was the fun in that?   larger scale models took over and that's when I found the Revell 1:96 scale kits....loved them.   but I'd look at a wooden kit and shy away,  thinking that I could never build one.   it's too bad that it had to be in my 50's,  that one of them would get thrown in my lap!  now I can't get enough of 'em!  
 
you've inspired yourself.......I can't wait to see your next one......    

Thanks, Popeye.  You're an inspiration.

Thanks, Jim and Carl.  
 
The Admiral approves too, describing the work as "elfy."  Elfy, as in the Keebler Elf.  She was drawn to the details, below.  
 
I'm back to puzzling out how to download pictures from the cloud. (Don't mean to publish them so large.) I'll figure it out eventually.  I really enjoyed building this, and I'm quite pleased with the results. There are many ways it can be improved, but that takes time and practice.  I can't wait to start another
 
 
. 


Having problems removing an extra picture.  If I'm successful, then good for me. If not, then thank you for your patience. 
 

Here it is.
 

A year later, I'd say it was about time to finish the build. (Moving from a four bedroom house to a 650 SF apartment is a serious disruption, and this Spring we've been getting out and exploring our new hometown of snohomish

 
I spent a lot of time painting--or rather, learning to paint.  I used filbert style brushes which worked well.  I thinned the paint to a workable consistency and just did the best I could. Getting even color w/o brush strokes is a real challenge, but I did the best I could.
 
I got bogged down attaching the molding. I was using CA for the first time, and I goofed in aligning them between the deck and hull. I tried to "color in" the gaps w/ a fine-tipped pen but that made things worse, and as often happens w/ bad ideas, I kept at it until there was nothing left but to strip them off and start over, which led to re-painting the hull and then, finally, the superstructure. This gave me an excuse to experiment with tints and shades and mixing colors.  I finally settled on a color and got it done.  
 
Rigging was fun. It took a while to develop a hand for working with the blocks--several of which I lost, replaced, then lost again. At length all was assembled and in working condition. The rigging thread looked too much like thread, so l bought some proper rigging from Syren. What a difference! A terrific upgrade.
 
So here I am. My first model finished. I'm pleased with the results. I had a lot of fun, and I made some rookie mistakes,  but I'm pleased with the results. 
 
 
 
 
 
 
 
 

Thanks, Jim and Carl.  
 
The Admiral approves too, describing the work as "elfy."  Elfy, as in the Keebler Elf.  She was drawn to the details, below.  
 
I'm back to puzzling out how to download pictures from the cloud. (Don't mean to publish them so large.) I'll figure it out eventually.  I really enjoyed building this, and I'm quite pleased with the results. There are many ways it can be improved, but that takes time and practice.  I can't wait to start another
 
 
. 


Having problems removing an extra picture.  If I'm successful, then good for me. If not, then thank you for your patience. 
 

Here it is.
 

A year later, I'd say it was about time to finish the build. (Moving from a four bedroom house to a 650 SF apartment is a serious disruption, and this Spring we've been getting out and exploring our new hometown of snohomish

 
I spent a lot of time painting--or rather, learning to paint.  I used filbert style brushes which worked well.  I thinned the paint to a workable consistency and just did the best I could. Getting even color w/o brush strokes is a real challenge, but I did the best I could.
 
I got bogged down attaching the molding. I was using CA for the first time, and I goofed in aligning them between the deck and hull. I tried to "color in" the gaps w/ a fine-tipped pen but that made things worse, and as often happens w/ bad ideas, I kept at it until there was nothing left but to strip them off and start over, which led to re-painting the hull and then, finally, the superstructure. This gave me an excuse to experiment with tints and shades and mixing colors.  I finally settled on a color and got it done.  
 
Rigging was fun. It took a while to develop a hand for working with the blocks--several of which I lost, replaced, then lost again. At length all was assembled and in working condition. The rigging thread looked too much like thread, so l bought some proper rigging from Syren. What a difference! A terrific upgrade.
 
So here I am. My first model finished. I'm pleased with the results. I had a lot of fun, and I made some rookie mistakes,  but I'm pleased with the results. 
 
 
 
 
 
 
 
 

A year later, I'd say it was about time to finish the build. (Moving from a four bedroom house to a 650 SF apartment is a serious disruption, and this Spring we've been getting out and exploring our new hometown of snohomish

 
I spent a lot of time painting--or rather, learning to paint.  I used filbert style brushes which worked well.  I thinned the paint to a workable consistency and just did the best I could. Getting even color w/o brush strokes is a real challenge, but I did the best I could.
 
I got bogged down attaching the molding. I was using CA for the first time, and I goofed in aligning them between the deck and hull. I tried to "color in" the gaps w/ a fine-tipped pen but that made things worse, and as often happens w/ bad ideas, I kept at it until there was nothing left but to strip them off and start over, which led to re-painting the hull and then, finally, the superstructure. This gave me an excuse to experiment with tints and shades and mixing colors.  I finally settled on a color and got it done.  
 
Rigging was fun. It took a while to develop a hand for working with the blocks--several of which I lost, replaced, then lost again. At length all was assembled and in working condition. The rigging thread looked too much like thread, so l bought some proper rigging from Syren. What a difference! A terrific upgrade.
 
So here I am. My first model finished. I'm pleased with the results. I had a lot of fun, and I made some rookie mistakes,  but I'm pleased with the results. 
 
 
 
 
 
 
 
 

Here it is.
 

Thanks, Jim and Carl.  
 
The Admiral approves too, describing the work as "elfy."  Elfy, as in the Keebler Elf.  She was drawn to the details, below.  
 
I'm back to puzzling out how to download pictures from the cloud. (Don't mean to publish them so large.) I'll figure it out eventually.  I really enjoyed building this, and I'm quite pleased with the results. There are many ways it can be improved, but that takes time and practice.  I can't wait to start another
 
 
. 


Having problems removing an extra picture.  If I'm successful, then good for me. If not, then thank you for your patience.