-
Posts
1,365 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by NAZGÛL
-
Ferit, according to the 1:10 model that area is red. "Common knowledge" earlier was that Vasa was blue with gilded sculptures and details. This was before the long work of analyzing the colour pigments had been done. If I understood correctly there is a picture of a french ship of the same era having this layout and people draw the conclusion that it would be the same on Vasa. Maybe they thought blue and gold would be typical swedish because of our blue and yellow flag. Ive tried to understand the knowledge of today and if I got it right: The color aestethics (north german) during this period was to paint the figures policolour with strong colors and details. The experts can say how she looked after a thorough work analyzing color samples from the ship. Red was the traditional colour for the navy and a royal colour at the time. Gilding was very expensive so they had to use yellow color for gould and only use gilding on the most important figures. The colour blue was very expensive to make, and therefore not often used. Swedish was a poor country at this time from all wars. The design and colors of the flag was also new at this time so a person at that time would probably not feel that blue and yellow were "swedish colours" at all. The 1:10 model at the museum is often stated to be very correct, so it is a great source for how she looked. In my opinion there should be some degree of freedom as she was under water for 333 years and I doubt they could test every part of 500 figures. I am giving myself artistic freedom, as Im using a darker red than the 1:10. I also dod my yellow details more like the colors of bones. It is for framatic effects (blood and bones gives a natural and dramatic feel). The BB is not perfect in the sculptures anyway, so that also gives room for artistic freedom. Im trying to look at the 1:10 and the painted sculpture replicas from the museum for color reference. I will tone down some nuances to my taste, some to give scale and make them blend well, other for dramatic effects. Sorry for the long post! /Matti
-
Painted the two putti holding vasan. I decided not to paint the red/white blue shield colour as I dont think it would work well and only look confusing. I just got hold of a copy of the great book by Björn Landström from 1980. The book is filled with beautyful illustrations of Vasa and from what I understand based on the knowledge people had about her back then. Many details on the BB is very close to Landströms pictures and that explains the differences from the original ship like the shield design, arc shape, stern gun ports, the 5 faces around the stern shutters and more. /Matti
-
The drawing from 1965 is from when they started to puzzle the stern pieces together after salvaging her. The details are still wrong compaired to the original ship but it could explain why they are. Im not to bothered with the errors, its an old kit. I havent seen any model kit being perfect so far. The japanese company Finemolds have the best reputation in Starwars models, but they have lots of errors to, that become noticeable once you start to look at the details up close. Looking at the details make me see some stuff that could have been better on the 1:10 as well, and thats the best Vasa replica made in my opinion. /Matti
-
Thanks buddy! Your Berlin deck details and the weathering of it is truly a great inspiration for me! Warning, detail nerd content following: I had been wondering why BB made the arch at the top shaped all round and not with edges at the lower ends like the original. I found an interesting pic in one of my Vasa books yesterday showing one of the early scetch from 1965 and it has the same form of the arch. The top details from the original is also missing like on the on the BB kit. Maybe this pic was used for reference? /Matti
-
Thanks for the supporting words Lawrence. Ill start painting the Vasa shield with the cherubs soon. /Matti
-
Hi again! Finished akterspegeln. Since BB made the molds for it when everyone thought it was just gould details I was a little worried about the design being to simplified, but Im surprised how well they did it. Some stuff is incorrect here and there, but overall its a fair representation of the real ship. I took a comparison of it with the 1:10 model. /Matti
-
Thank you Wolf! Before starting with the galleries and lightning the admiral cabin, I decided to start painting the akterspegel. I think its really tough to get the sculptures right when it comes to color tone. The bright fleshy looks doesnt give the look right in the 1/75 scale. Im trying to blend it down with washes and go paler, but its hard to get right. Painting the sculptures take some time, so I will do some wood work, then do a little paint, then wood work again to keep the flow in the build. /Matti
-
Very nice job! Looking forward to see more. /Matti
- 79 replies
-
- santa maria
- amati
-
(and 2 more)
Tagged with:
-
Thanks Buck! So it seems everyone does double planking on their models. This. however will have single planking only. I have been thinking about this from the start of the build, and this is how I think: Cons: The model is designed for single planking, so I would likely mess upp the proportions. It would also look "wrong" with two layers of planks looking straight from the stern. I could use thin planks to avoid that, but I cant see that I could get the weird bends I need in the bow area with thinner planks. They must be flexible and sandable to get the shape. I allready have the look Im after when it comes to slightly rough planks. Pros: I could follow the original ships plank lines. They should follow the railing line (BBs construction doesnt allow this line), but it would also mean I couldnt follow the lines I allready did. I could controle the gaps between every plank. So now its on to the next steps of the build. Yay! /Matti
-
Hey again. Been even more busy at work, but soon it will calm down. Here are some pics of where Im at. Im close to finish the hull planking. The bow will need some paint to look the way I want, but the planks ended up reasonibly close to what I aimed for. As its my first build in wood, I learned as I went along, but no nasty surprises so far, well no big ones anyway. I planked as far down as I could following the curve of the planks before making a keel plank. I dont want there to be two obvious curves meeting in the hull planking, and hopefully this one will feel natural. I made lips on the front end of the planks to get a secure fit to the other planks. I also had to build in the wires for lighting her later. I almost forgot to add them when I was doing some planks being tired after work and when kids had gone to sleep. In the last minute I remembered... In the final pic I placed her half sized sister, a Revell kit I bought earlier. I have it to try out the colors and looks I want. As a kit its very good, but to idealized in my taste. It has been great for proportions and planking ideas none the less and Revell tried hard to get the details right. The sculptures are so well done. /Matti
-
The finish is extremely nice, Buck! Im a fan of rough and dirty looks, but man, Im very impressed! Well done. /Matti
- 515 replies
-
- artesania latina
- whaleboat
-
(and 1 more)
Tagged with:
-
Looks stunning! Thanks for the detailed explanation pictures. I like them and will try make some further along. Not having enlish as my language makes me hesitate to explain things as I dont have the vocabulary, but with a pic its clearer. /Matti
-
Looking great Michael! You can be really proud of her. I really like the look of the natural brown againdt the painted figures so that was a good decision you made. I think everyone worry about things in retrospect, but I think you have given your build a soul and it looks awesome. I will miss the updates but hope you will check in once in while and help us others with tips. /Matti
-
Thanks you Lawrence and Michael, it means alot! Im getting closer to the keel with the planks, and will post an update when Im there. I think Im doing it somewhat backwards compaired to how Ive seen it described, but I cant see me getting the look I want any other way. So to any other new guy/gal dont take my way as the best way. Its quite time consuming as I have to soak and shape many planks after fastening the previous, so I can only do a few planks a day. About Ivar. I dont have such a big beard as him, but my wife warns me that if I keep not shaving Im in the riskzone. Ive been told alot lately that I look more like Adam Savage. I dont mind that really. /Matti
-
Birds is just excellent, and yeah she is a great singer. Looking forward to more progress pics. /Matti
-
That turned out great, Anja! I really like the profile of that ship. And gongrats on having the best song in the ESC even if you didnt win. /Matti
-
Started too read through your log and came to the accident... Ouch! Hope the fingers got better! Model building has its dangers. The ship is looking very nice! /Matti
-
Top notch job Ferit! I will definately look at this when it comes to detailing the deck and guns. Id love to see a pic of your model taken outside to see the colors. /Matti
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.