-
Posts
1,625 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Posts posted by Adrieke
-
-
thanks Mick
did a few hours of sanding today
before sanding :
I work in steps. first I sand off the sharp parts of the reinforcements making them even with the bulkheads and the keel
then I slowly keep sanding till all the laser cut burns are gone
the 2 reinforcements in between the bulkheads at the stern are really difficult to sand
I still have lots to do on the bow and stern areas and I haven't even started on the bulkheads in between so I doubt I ll be able to finish this weekend
-
thanks Brian
two more reinforcements to install at the front and then i can start sanding during the weekend
-
-
-
- mtaylor, robert1965, Piet and 1 other
- 4
-
thanks Randy
they are better but dont expect too much. for instance for the placement of the doors,windows and handrails no measurements are given and no plans are provided
so i used the photos (and part list lengths) to calculate and guestimate thier positions.
and so far no real errors in the parts, not like the kom where you have plenty of errors to fix up
-
good to see you where abel to make some progress
looking very nice
-
thanks Wayne and Dragzz
-
thanks Mark i promise i ll take some pictures withe lights on . but first i want to a bit more finishing off on the railings and stairs
thanks Jim its been a fun and a sad journey and i am glad i am able to finish it
-
Looks like there is a lot of tedious work in all those handrails! But it's coming along great. Looking very sharp.
thank you but it looks harder than it is
thanks Mick. Edwin, Augie and Scott
-
yesterday I started on the forward structure
with all the preparations of drilling holes and marking where doors and windows go work progressed good (the forward deck is only dry fitted)
just a bit of touching up the paint work here and there
the single eyebolt next to the right most door is for the handrails next to the stairs. I am waiting to fit the forward deck on top so I can determine the angle off the stairs and drill the final 2 holes. then I can add the handrail and the last window
after that its just a few more reinforcement to install and fix the 4 parts of the bulwarks and planking can begin
at least after the sawdust festival of the fairing of the bulkheads
-
-
thanks Popeye : and i am proud
thanks Piet
-
thanks Popeye
actualy planking is not so far away now
-
-
very beatiful planking . but then we dont expect anything less from you Danny
-
thanks Dragzz. i really like workign on the railings , its those pesky white triangles that drove me insane. i am going to get some cardboard to put against the sides so i dont accidentaly rip one off
thanks Robert
thanks Joe and you are welcome
thanks Sjors. yes and no still lots of work but i am aiming to have her ready by end of the year
thanks Mick
thanks Randy
-
thanks Dragzz you are doing excelent work on your Kom so you ll do a good job when you start on one of the bigger ones
thank you Slog . i am pleased with it that it looks all neat
thank you Sjors. the steering house is now in a container safe from dust untill it can be put back on (which will still be a very long time)
thank you Mick i am improving in neatnes
thanks Randy. yes i l definately be using this one from now on
thank you Robert
-
very neat and Beautiful Robert
-
-
- Captain Slog, Charley54, robert1965 and 1 other
- 4
-
Robert really looking good
yes it looks crooked but that's because you are looking at it from far away. imagine you are standing on the boat next to it. even do the deck angles upwards you d still be standing straight just like the vent is straight.
-
thank you John
but I think building in card is not for me at the moment. when I can I will try to finish this build but it certainly will not be my best
if you want to see some really beautiful work in card check out the build log of the Royal Caroline by Doris. its absolutely amazing
-
thanks John and you are doing good work on your Bireme
HMB Endeavour by Micklen32 - OcCre - 1:54
in - Kit build logs for subjects built from 1751 - 1800
Posted
not bad about $20 AUD with postage I might order some as i am running out of small drill bits