-
Posts
2,132 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by pete48
-
Beautiful work Patrick, she's coming together rather nicely Best Regards, Pete
- 1,083 replies
-
Today, I was able to get 3 more rows of planking installed ( in the same manner described in the last build posting) and started rough fairing the Hull. I am very pleased with how she is turning out. Next will be to get the final 3 rows of planking installed and start making the Sheer Strake ( wich is a key element to this build) Here are the results
-
Thank you, Burroak, I appreciate it Hey Patrick, don't feel so bad, Years ago, there was an apprentice carpenter who was placed on my crew and I sent him to my truck to get the Board Stretcher, after a while he came back and said that he could not find it. The superintendent got in on it and for a few days he was stumped, we later sent him for a ladder permit ( lol ) Hi Deon, Thank you for the compliment. this one will be able to be sailed. ( right now its about 30 degrees F with about a foot of snow on the ground ) So when it warms up, we can go sailing Best Regards, Pete
-
Today, I started out by lining off the next plank ( #3) I then placed it in rubbing alcohol ( for about an hour ) I then realised that I was about 1/4" to short at the transom. ( I unfortunately, do not own a board stretcher ) Frustrating, so I made new one's ( I only make and install one plank at a time, so any adjustments can be made on the following plank ) at this point I decided to pull out the Herreshoff 12 1/2 work that I started right after Christmas. ( while I waited for the planks to soak ) In my excitement to finally have the plans for what is to me the Holy Grail of Sailboats, I made some mistakes, I laid out the frames incorrectly and used the wrong thickness of wood. ( 22 frames ) I realised that I could build it as a 1 off so I grabbed a base board laid it out and started putting it together ( while I wait for the planks to soak ) I did get plank #4 laid out, soaked and installed. Next will be to continue the planking and decide whether or not to turn the Herreshoff 1 off into a build log. That being said I would not be able to build her in the same method that I am using for this build ( Herreshoff Mfg. method ) the jury is still out Here are the results . The last shot is of the Herreshoff 12 1/2 ( no frames glued in yet )
-
Thank You, Patrick, She's right on the money, I could not be more pleased, this boat sure is a lot of fun to build, The Herreshoff Mfg. method to build this boat makes a lot of sense and is straightforward Thank You, Jack, Yes, I am familiar with the Herreshoff Ice Yacht, I have the copy of Wooden Boat laying around here somewhere with an article on it. That is Awesome that you were able to see one ( pretty amazing stuff ) Best Regards, Pete
-
I started Today, by finishing the rabbet line cut between the stem and keel and faired in the rabbet at the transom. I then started lining off the ribs for the planking, there are 10 planks per side ( port & starboard ) I then laid out the garboard plank ( you only have to lay out one side and use it as a pattern for the other side ) cut the garboards out and placed them in rubbing alcohol. I then laid out the broad strake and did the same as the garboard. I then ( after a 2 hour soak ) pulled the garboard out 1 at a time worked the bends and installed them to the keel and ribs. Next I did the same with the broad strake's. Next will be to continue the planking. here are the reswults
-
Thank You, Piet, Almost ready for the Downwind leg on this build, She has been a pleasure to build Best Regards, Pete
- 258 replies
-
- buzzards bay
- herreshoff
-
(and 1 more)
Tagged with:
-
Today, I got an early start ( 4:30 am ) by cutting out the Cockpit coamings, I then soaked them in rubbing alcohol for about 4 hours. I then took the first one out of the alcohol, slowly bending it to conform to the deck shape and curve ( this took about 45 minutes ) I then took the second one out of the alcohol and did the same. Once the Coamings held their shape on their own I taped them into position. Next will be to fine tune and sand the Coamings up to 600 grit sandpaper then stain. Here are the results
- 258 replies
-
- buzzards bay
- herreshoff
-
(and 1 more)
Tagged with:
-
That is true Cap'n'Bob, It did help a lot having built this boat 2 other times.( along with a mock-up that I started before the first one was built ) I have solved the issues that I had encountered on the previous builds. Wich brings up an interesting topic, How many people make mock ups or partial builds to solve problems ( I make mock-ups all the time ) The Buzzards Bay Mock-up has been under construction over 2 years thrown in the garbage and pulled out of the trash ( by Kate )more than once re-decked twice, painted a few times, sanded numerous times Here is a shot of it in the background Best Regards, Pete
- 258 replies
-
- buzzards bay
- herreshoff
-
(and 1 more)
Tagged with:
-
Thank You, Patrick and Michael, and everyone that hit the like button, I am very pleased with how she is turning out, This build has gone very smooth and has been an absolute pleasure to build Best Regards, Pete
- 258 replies
-
- buzzards bay
- herreshoff
-
(and 1 more)
Tagged with:
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.