Jump to content

Requesting advice for cutting rabbets


Recommended Posts

Hi,

As the title says, can anyone tell me a good and reliable method to cut a rabbet, especialy at the ship's bow?

I know that chissels and hobby knives are suposed to work somewhat adequately but im worried that cutting a clean line can be somewhat challenging with these tools. A milling machine will certainly work as well but tbh, im somewhat on a budget and simply cannot afford the money for one.

So i wonder, can anyone give me any good hints and tips? I saw many a finely cut rabbet here and wonder what tricks you use to achive this :)

Link to comment
Share on other sites

I use a sharp blade, always cut less than I need, and go slow, checking with a sample piece of wood for fit every so often. Use a stop cut at the bottom edge with the flat edge to the bottom. Cut just deep enough, but not too deep. You can always take a little more off if need be. Then cut from the top of the rabbet, down to the stop cut. Cut inside the lines and then fine tune your way to the lines as you go along. Time taken here to get this right will pay dividends later on.

 

Russ

Link to comment
Share on other sites

check out the scratch build of Young American by EdT page 5 post 74

I've tried to copy a link but no success.

Alan O'Neill
"only dead fish go with the flow"   :dancetl6:

Ongoing Build (31 Dec 2013) - HMS BELLEROPHON (1786), POF scratch build, scale 1:64, 74 gun 3rd rate Man of War, Arrogant Class

Member of the Model Shipwrights of Niagara, Niagara Region, Ontario, Canada (2016), and the Nautical Research Guild (since 2014)

Associate member of the Nautical Research and Model Ship Society (2021)

Offshore member of The Society of Model Shipwrights (2021)

Link to comment
Share on other sites

Don't worry about not having  the milling machine, it won't work for a rabbet as the rabbet is dynamic for the most part and the set up on the mill would be static.    The Fully Framed Model Vol. I describes the process very well on pages 44 and 45..  A SHARP vee gouge and/or knife and chisel will do the job beautifully if you follow the advice of Russ and take baby steps.

 

Allan

PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series.   Click on http://trafalgar.tv   There is no cost other than the 30 seconds of your time.  THANK YOU

 

Link to comment
Share on other sites

I have used both a 60o and 90o V-gouge to cut rabbets. Set the V-gouge so that one side is perpendicular to the wood and lay the other leg against the inboard side of the keel piece and gently take small cuts in the wood.  With a little practice you can get the hang of it and cut a pretty decent rabbet.  As everyone has said make sure the gouge is SHARP and go slow

Link to comment
Share on other sites

Sharp and small.  I used a home made chisel from an exacto blade, so you don't need to spend hundreds of dollars, though mine is a little flimsy.  Good thing, though, perhaps, as it made me go slowly.

The books mentioned will also teach you what your result should be like, in shape and curve, etc.  That's important, too.

Link to comment
Share on other sites

Sharp and small.  I used a home made chisel from an exacto blade, so you don't need to spend hundreds of dollars, though mine is a little flimsy.  Good thing, though, perhaps, as it made me go slowly.

The books mentioned will also teach you what your result should be like, in shape and curve, etc.  That's important, too.

 

 

I agree, Sharp and small.  Also, watching a few carving videos on youtube or vimeo, where the carve is using the V chisel in different applications can be of great help.  This gives you an idea of how the tools work and what to expect.

 

Gwyl

Link to comment
Share on other sites

  • 2 weeks later...

I used an extremely sharp v gouge on my Pegasus, I practiced first on some scrap taking very small amounts of cuts over multiple passes, slowly but surely I got a really good result.

Practice and a very sharp tool!

 

Ben

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...