dcicero Posted January 16, 2017 Share #1 Posted January 16, 2017 Just wondering... Is the Clay Feldman scratch building practicum on the brig Lexington advertised in Ships in Scale any different from the eight articles in the magazine published back in 2005? I have those old magazines -- both the digital and hard copies -- and was wondering if there's any difference. Dan Canute, thibaultron and flying_dutchman2 3 Quote Link to comment Share on other sites More sharing options...
ccoyle Posted January 17, 2017 Share #2 Posted January 17, 2017 Nope. Same practicum. The Lumberyard used to sell a wood package for it -- they might still offer it. thibaultron, Canute and mtaylor 3 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, Bf 109E-7/trop Link to comment Share on other sites More sharing options...
Dwaing Posted December 13, 2018 Share #3 Posted December 13, 2018 My Christmas present is a Lexington kit from The Lumberyard. Feldman's practicum is no longer available from SeaWatch Books . Does anyone know if there is a copy, book or DVD, available? Would any one be willing to share with me or sell to me a copy? Thanks for any help. thibaultron, mtaylor and Chuck Seiler 3 Quote Link to comment Share on other sites More sharing options...
kurtvd19 Posted December 13, 2018 Share #4 Posted December 13, 2018 The Nautical Research Guild (NRG) now has all of the Lexington book and CD files formerly sold by Ships in Scale magazine. The CD with the pdf book is available for $39.95 on a CD disc or $49.95 on a Flash Drive plus $5.00 shipping from the NRG. We do not have it available in the NRG store yet for on-line ordering, but if you call the NRG office (585) 968-8111, Mary can take your card information or give you the PayPal payment information and we can ship you one. You can print out the book or use it on your computer. Take care, Kurt Chuck Seiler, thibaultron, mtaylor and 3 others 6 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS Link to comment Share on other sites More sharing options...
Dwaing Posted December 13, 2018 Share #5 Posted December 13, 2018 Kurt Thank you for the information. I was almost your neighbor in Clarendon Hills a long time ago. Wain If you can read you can learn anything for here are those who can write, however not everyone who can write has correct information. Canute, thibaultron and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
kurtvd19 Posted December 13, 2018 Share #6 Posted December 13, 2018 Wain: I just shipped your copy to you. thanks, Merry Christmas Kurt thibaultron, mtaylor, Canute and 1 other 4 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS Link to comment Share on other sites More sharing options...
JerryC Posted January 31, 2023 Share #7 Posted January 31, 2023 (edited) I’m trying to assemble the Clay Feldman Lexington kit from Dlumberland. I’m working on planking the quarter deck and am stuck on the tapering. I tried to do it with eyeballing the taper, but the results were not spectacular to say the least. I had to rip it all out and am starting over. Any suggestions for managing this operation? I have my stock all ready, I’m just having trouble managing the tapering. I did one using a binder clip and sandpaper and it looks ok, but I can’t see doing that 24 more times. Edited January 31, 2023 by JerryC Upside down picture thibaultron 1 Quote Link to comment Share on other sites More sharing options...
tlevine Posted February 1, 2023 Share #8 Posted February 1, 2023 Jerry, this is how I tapered the planks on my Fair American. Measure the width of the deck at the fore end of the quarter deck and at the transom. Decide the width of planks at the break of the deck, for example ten inches. Divide the deck width by the plank width. It obviously will not be whole number. So if your deck width is twelve feet, you will have fourteen whole planks and an extra four inches. Add a quarter inch to the width of each plank and you have the width of the planks at the break. Now divide the width at the transom by fourteen and you have the plank width there as well. Now that you know those two numbers, make one deck plank out of card and use it as a template to make the planks. For installing, start at the midline. It is a lot easier to hide an odd plank at the waterway than in the middle of the deck. And don't forget the slight taper along the plank edges to compensate for the camber of the deck. Roger Pellett, CiscoH, Ryland Craze and 3 others 5 1 Quote Toni Chairman Nautical Research Guild Member Nautical Research and Model Society Member Midwest Model Shipwrights Current Builds: Utrecht-1742 Completed Builds: Longboat - 1:48 scale HMS Atalanta-1775 - 1:48 scale Half Hull Planking Project Capstan Project Swallow 1779 - 1:48 scale Echo Cross Section NRG Rigging Project Utrecht-1742 Gallery: Hannah - 1:36 scale. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.