Wooden box by Wiktor.L - FINISHED

[Wiktor.L]

Hi.

Some times ago i try to make a wood casket, here are the effect...

 

[Wiktor.L]

And my try to make glass-case for souvenirs, and in the future maybe for the ship models.... Its my 1st time to make electric circuit....

 

[Papa]

Nice work. Both cases are very nice.

[Wiktor.L]

Trying to make work table

 

[Wiktor.L]

Frame....

 

[popeye the sailor]

have you run the top through a planer to even it out,  or are you just going to sand it?

[Wiktor.L]

All wood i cut manullay. there for the innacuracies. they will disapeer under the belt grinder.

[Matrim]

when i built my work table I joined the planks vertically together. It made the top 'thick' but gave it a lot of strength that I think it looses by joining width ways. Here are some quick shots (you#ll have to forgive the mess as as I am obviously mid model)

 

So front view showing size

 

 

Side view to show how the table top planks join together

 

 

And finally how the base structure works (this is actually similar to your approach I think)

 

 

It is very heavy but will not move anywhere and if the table top gets cut up then I can always re-plane and varnish and it would still be huge...

[Wiktor.L]

This my 1st project that type. Next can be better. But that table i made for heavier work than making models  I wanted to avoid buckling the countertop... In the previous Bought  tables are twisted....

By the way i glue counter top to legs. This need onlky grind, and look corrects. And after i try to make a drawer and the shelf for tools...

[popeye the sailor]

the last picture is interesting.......I'd be proud of the table.   most I've done of late is hang a picture    nice table as well Matrim.........that top certainly won't buckle  

[Wiktor.L]

Main workbench is end. Was 2 shelf and a drawer.

And the his place in the workroom.

 

[Wiktor.L]

Hi.

Drawel rail.

 

[Wiktor.L]

Drawer is end. 

I finished it with tung oil.

Edited November 7, 2019 by Wiktor.L

[Wiktor.L]

Top shelf fot the table in progress,  lower shelf in progress, sides are done.

Closer to the end..

[Wiktor.L]

I going to build a drum grinder.

Some missing this tool in workshop.

Yes, i know, wood is not the best option to make this type of tools, but for now i dont have a plywood...

In progress

[Wiktor.L]

Table is end, but not yet

In the near future i make a stronger a countertop...( I glue beech on the "old" countertop) 

[Wiktor.L]

New version of drum and continuation the base

[Wiktor.L]

Main piece of sander is done. There is the bearing and the new 10mm screw

[Wiktor.L]

Continued.

I should end it in max 2 days.

For now everything is going accoridng to plan.

 

[Wiktor.L]

hi.

Durum sander is end.

I finished the drum with roll, after it the sandpaper.

I m happy with the effect, it is not most beatiful, but it work, and this is the most important thing in this utensil type. 

The biggest problem with it anchorage the sandpaper to drum....

Precision is very well. For pre-treatment pank to the model, where the harvest is small it can do it good. To set the table top precisely need a little time,  but it's worth?

I'll add to it the extraction soon.

[Wiktor.L]

I started to make a glass-case to another "souvenir". Again a little different.

This is the beech wood, buckram. 

I solder the leds parallel.

It is not sanded definitely.