Fokker Dr.I by Javlin - FINISHED - Eduard - 1/72 - PLASTIC

[Javlin]

This should be a quick build with the paint  being the most complicated part of the build in getting the striping to scale with oils.The copit I almost did not bother with for one will never really see once done and so small but gave it a whirl. Kevin

[Javlin]

I used oils over an enamel olive base I selected white,blue,light olive and dark olive in the oils using a fan brush.The only thing I do not like about using oils is the texture left behind I tried to level it some with spirits but it was blending to much.I will get better pics later in the sunlight once this is all dry.I am glad I don't do this for a living now in 1/32 it might work better.

[Javlin]

Well I went at this some more concerned about the texture and found I could smooth it out for the most part flat soft brush with a light touch added some more white and blue into the mix once it cures good a couple of days throw out some pics.Thanks for the interest. Kevin

[popeye the sailor]

looks like it turned white on you...unless it's the angle your holding it.    I got the roden kit @ 1:32 scale for Christmas.........showcases the same paint scheme,  along with three others.  I have a small collection of D VII's and Dr 1's.  I hardly have any luck using other paints or stains......I stick mainly with enamels.

[Javlin]

The tail is black/white and so is the engine cowl.That will be a hard scheme in enamels or acrylics the oils gives you time to layer it.If you want the site with I think some of the most serious way out of my league look here home page   https://ww1aircraftmodels.com/index.html    nice hints for WWI A/C  and the forum of the builds   https://forum.ww1aircraftmodels.com/index.php?board=3.0

[popeye the sailor]

bookmarked it........I'll check it out  

[Javlin]

This one is getting close to finish another 1-2 hrs.The decal are giving me fits most of it is my fault the cross on the tail is crooked tried re-soften it almost lost it said the heck with it.I would not mind building a few more of these of Jasta 18.You can see the gunsight rings in the front pic.

Edited December 28, 2019 by Javlin

[Javlin]

I went ahead and broke the tail removed decal and applied NEW decal to the same EFFECT!!! @#*^% So we took off that decal repaint the rudder all white again mt mask for the tail made it to the trash so I had to paint the black by hand.This time kevin glued the damn rudder to the plane and applied decal although the wrong ones for the plane it will just have to frigg'in do! I am good now Kevin

 

 

 

 

 

 

Edited December 29, 2019 by Javlin

[popeye the sailor]

really sweet trippe    looks small for 1:72.........I recall the pair I did when I first got back into modeling........seems like eons ago.  I got 'em from a gent in England off of E-bay.  the red baron and Werner Voss's.....I forget the scale.

   

 

wonderful job........I hope I get the same resultz when I get into the Roden kit...

I would like to get one in 1:28 scale.........a very nice scale to work with.   I built the Revell Fokker D VII in 1:28........  

[Landlubber Mike]

Nice Kevin!  Really came out well.  I'm working on a couple of 1/72 biplanes myself, very hard at this scale so I appreciate the efforts!

[Javlin]

 

I hope I get the same resultz when I get into the Roden kit...

 

If you go the oils it can be done I tried with prop doing the same thing with enamels it dried to quick had to repaint Kevin

Edited January 2, 2020 by Javlin

[popeye the sailor]

enamels are all I use........mainly flats.  I do some dry brushing though,  so I get some sort of effect.   gotta love the camo in that era