Sundt Posted January 5, 2020 Share #1 Posted January 5, 2020 Started building a old Billing Boats kit. PS hull was told to be the last kit, they started a new production in wood some years later, available today. some tip about glue will be asked for 🙂 popeye the sailor, BobG, GrandpaPhil and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Jim Lad Posted January 5, 2020 Share #2 Posted January 5, 2020 Hello Sundt, and a warm welcome to the forum from 'Down Under'. John popeye the sailor and Sundt 2 Quote Link to comment Share on other sites More sharing options...
Sundt Posted January 5, 2020 Author Share #3 Posted January 5, 2020 (edited) Brass tube with fittings to be installed. The boat will be used in saltwater. fitting is to be inserted in the tube with some pressure. Is it clever to just add some thread locker, or glue? Edited January 7, 2020 by Sundt coxswain, popeye the sailor and GrandpaPhil 3 Quote Link to comment Share on other sites More sharing options...
coxswain Posted January 5, 2020 Share #4 Posted January 5, 2020 Welcome Sundt - I've always been intrigued by these big Colin Archer kits - will you be sailing it or just static? Steve M popeye the sailor and Sundt 2 Quote Link to comment Share on other sites More sharing options...
Sundt Posted January 5, 2020 Author Share #5 Posted January 5, 2020 (edited) 28 minutes ago, coxswain said: Welcome Sundt - I've always been intrigued by these big Colin Archer kits - will you be sailing it or just static? Steve M Thanks, Will be sailing. i hopefully finishing next year. 2020 hull work, 2021 rigg and remote control. In my house i start planing for storing fully rigged and easy access to bring the boat to the water 🙂 Cross my fingers. Then doing som house rehab, the time is 3 times my planned. Have made some internet search for the kit. haven't found to much, so now i will bring it on the net 🙂 brgds Andreas Edited January 5, 2020 by Sundt coxswain and popeye the sailor 2 Quote Link to comment Share on other sites More sharing options...
Sundt Posted January 5, 2020 Author Share #6 Posted January 5, 2020 2 hours ago, Jim Lad said: Hello Sundt, and a warm welcome to the forum from 'Down Under'. John Thanks a lot, this kit hopefully prepare my skill to finish a Constructor's kit named Emma Baltimore clipper. Brgds Andreas popeye the sailor 1 Quote Link to comment Share on other sites More sharing options...
Sundt Posted January 17, 2020 Author Share #7 Posted January 17, 2020 Propeler tube and fittings installed and some other parts. GrandpaPhil, popeye the sailor and coxswain 3 Quote Link to comment Share on other sites More sharing options...
Sundt Posted January 17, 2020 Author Share #8 Posted January 17, 2020 (edited) A bit tricky to glue aft and front plywood to the PS hull. Strapping tape made my day. Next time i will preinstall the tape on the hull, not on the ply( glue then get dragged outboard on the hull) I do that on the bow, the stern get nicer, the tape was applied to the hull first. 🙂 Edited January 19, 2020 by Sundt new picture inserted GrandpaPhil, popeye the sailor and coxswain 3 Quote Link to comment Share on other sites More sharing options...
Sundt Posted January 21, 2020 Author Share #9 Posted January 21, 2020 Upper side beam in ply was to stiff to bend. some hot water and soldering iron to make a curved beam work well. Video: how to bend wood and plywood. You can practice on som leftover from earlyer builds. Glue: Stabilit Exspress (PS hull to wood) IMG_9244.mov popeye the sailor, GrandpaPhil and coxswain 3 Quote Link to comment Share on other sites More sharing options...
Jim Lad Posted January 21, 2020 Share #10 Posted January 21, 2020 She's coming along well. John popeye the sailor and Sundt 2 Quote Link to comment Share on other sites More sharing options...
Sundt Posted February 15, 2020 Author Share #11 Posted February 15, 2020 (edited) Some more gluing tomorrow 🙂 Edited February 15, 2020 by Sundt yvesvidal, coxswain, popeye the sailor and 2 others 5 Quote Link to comment Share on other sites More sharing options...
popeye the sailor Posted February 16, 2020 Share #12 Posted February 16, 2020 never tried one of these plastic hull ships.....looks really good Sundt 1 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch Link to comment Share on other sites More sharing options...
Sundt Posted February 18, 2020 Author Share #13 Posted February 18, 2020 Plastic hull, i needed Stabilit Exspress. I wanted a RC sailing scala boat from Norway 🙂 More gluing with white glue "ponal exspress" Vladimir_Wairoa, Mirabell61, ccoyle and 6 others 9 Quote Link to comment Share on other sites More sharing options...
yvesvidal Posted February 18, 2020 Share #14 Posted February 18, 2020 oh oh somebody is smuggling liquors in the bilge.... Yves lmagna, popeye the sailor and Sundt 3 Quote Link to comment Share on other sites More sharing options...
popeye the sailor Posted February 19, 2020 Share #15 Posted February 19, 2020 my good man.....don't leave that in there.......it's to be savored deck framing looks very good! the Boulogne Etaples is set up much the same way......since I wasn't going to build an RC version, I had a heck if a time covering the open area. it wasn't build solid as this one was. the deck showed the ugly lines........took some doing to get rid of them. {I really need to get back to it}. I see your into balsa planes too coxswain 1 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch Link to comment Share on other sites More sharing options...
Sundt Posted February 20, 2020 Author Share #16 Posted February 20, 2020 19 hours ago, popeye the sailor said: my good man.....don't leave that in there.......it's to be savored deck framing looks very good! the Boulogne Etaples is set up much the same way......since I wasn't going to build an RC version, I had a heck if a time covering the open area. it wasn't build solid as this one was. the deck showed the ugly lines........took some doing to get rid of them. {I really need to get back to it}. I see your into balsa planes too I love the smell of wood. have built some modelaeroplane from stevensaero (off topic) . the bottle will be opened then the hull is close to finished, or i feel it's finished 🙂 I will follow your built if it´s in here. Thanks for following ! coxswain, popeye the sailor and GrandpaPhil 3 Quote Link to comment Share on other sites More sharing options...
popeye the sailor Posted February 21, 2020 Share #17 Posted February 21, 2020 very nice Sundt 1 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch Link to comment Share on other sites More sharing options...
Sundt Posted February 22, 2020 Author Share #18 Posted February 22, 2020 Some smal part glued. Tomorrow the hull need to be sanded so the ply-deck can be glued on. Still some part in the box😄 coxswain, yvesvidal, GrandpaPhil and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Geam Posted February 28, 2020 Share #19 Posted February 28, 2020 The Billings kits seem generally to have quite scanty instructions. BUT, that did not stop me from buying a Colin Archer '414' kit in January! A chap in Stavanger, Norway had bought it about 10 years ago and did not get around to starting the build. He decided to make some space in his storeroom and sell the kit. I have built the stand and stained/oiled it. I plan to start other build-processes around Easter 2020. I am in the process of building a Fisher 34 motorsailer from Model Boats plans service. The plan is actually for a Fisher 46 aft cabin so I have modified it a bit. Started last September. I owned a Fisher 34 (full size) many years ago and have often thought of building a R/C model of it. Some photos of the construction progress are on the Model Boats forum in UK. I look forward to following the build of your Colin Archer. Hope you show the internal sail winches and control lines. I have bought 2 Graupner winch-servos for mine. Plan to let the mizzen sail be free and only restrained by a light guage elastic. I've seen one or two 'build-bloggs' on the www. from two different modellers in Germany. They are quite critical of the scanty instructions....though the kit is not aimed at first-time builders, so maybe this explains it. Both managed to build great models in the end. One guy only took 4 months to complete. George, Norway popeye the sailor and Sundt 2 Quote Link to comment Share on other sites More sharing options...
Sundt Posted February 29, 2020 Author Share #20 Posted February 29, 2020 On 2/28/2020 at 8:10 AM, Geam said: The Billings kits seem generally to have quite scanty instructions. BUT, that did not stop me from buying a Colin Archer '414' kit in January! A chap in Stavanger, Norway had bought it about 10 years ago and did not get around to starting the build. He decided to make some space in his storeroom and sell the kit. I have built the stand and stained/oiled it. I plan to start other build-processes around Easter 2020. I am in the process of building a Fisher 34 motorsailer from Model Boats plans service. The plan is actually for a Fisher 46 aft cabin so I have modified it a bit. Started last September. I owned a Fisher 34 (full size) many years ago and have often thought of building a R/C model of it. Some photos of the construction progress are on the Model Boats forum in UK. I look forward to following the build of your Colin Archer. Hope you show the internal sail winches and control lines. I have bought 2 Graupner winch-servos for mine. Plan to let the mizzen sail be free and only restrained by a light guage elastic. I've seen one or two 'build-bloggs' on the www. from two different modellers in Germany. They are quite critical of the scanty instructions....though the kit is not aimed at first-time builders, so maybe this explains it. Both managed to build great models in the end. One guy only took 4 months to complete. George, Norway i see that kit on the marked 🙂 Thanks, i will post my progress, from glue, stain, photos from a real Collin Archer or changes i do, haven't find any photo or video of the rigging. I want som details, so hopefully a got som nice pictures in the end. Just ask if more information is needed , i then changes the text bellow the pictures 🙂 popeye the sailor 1 Quote Link to comment Share on other sites More sharing options...
Sundt Posted March 1, 2020 Author Share #21 Posted March 1, 2020 Stabilit express glued in a wooden stick for reinforcement. Just in case, some of the rigging rope to be attatched. yvesvidal, coxswain, popeye the sailor and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Sundt Posted April 2, 2020 Author Share #22 Posted April 2, 2020 (edited) Glued some more tonight. Deck installed. Tomorrow i will see the result 🙂 Before gluing, i made a clamp and installed weights 2- times. 10 min first time, 7 min second time 😉 Then applied glue, clamp in mast hole and around opening in deck. Weights , and tape on edges around the boat Edited April 3, 2020 by Sundt Added text popeye the sailor, GrandpaPhil and yvesvidal 3 Quote Link to comment Share on other sites More sharing options...
Jim Lad Posted April 3, 2020 Share #23 Posted April 3, 2020 It's been a while since I looked in, but she's certainly coming along nicely. John popeye the sailor 1 Quote Link to comment Share on other sites More sharing options...
Sundt Posted April 3, 2020 Author Share #24 Posted April 3, 2020 (edited) 8 hours ago, Jim Lad said: It's been a while since I looked in, but she's certainly coming along nicely. John thanks, I needed some inspiration, grabbed some sticks in the box, she will be lovely 🙂 IMG_0375.HEIC Colin Archer.HEIC Edited April 3, 2020 by Sundt Picture not visible ccoyle, popeye the sailor, GrandpaPhil and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Sundt Posted April 5, 2020 Author Share #25 Posted April 5, 2020 My next question is making the deck planking including 0,6mm caulking1:15(8-9mm), deck layouts is important when planking. The outer dollbord is oak i think. Have to collect som information before installing reiling? I think its nice to finish the deck including outboard Dollbord, sanded and some oak/ mahagoni stain where needed. Outboard dollbord glued on, it was a bit difficult, but after some test fit, its installed 🙂 Happy easter from Norway Vladimir_Wairoa, coxswain, popeye the sailor and 3 others 6 Quote Link to comment Share on other sites More sharing options...
yvesvidal Posted April 5, 2020 Share #26 Posted April 5, 2020 You never have too many batteries.... :-) Yves popeye the sailor and Sundt 2 Quote Link to comment Share on other sites More sharing options...
Sundt Posted April 7, 2020 Author Share #27 Posted April 7, 2020 Startet with som pictures of RS1, discovered that drawing wasn't correct according to deck- beam ? new black lines with permanent marker where it must be acc to the designer drawing. New layout on planking. Permanent marker on edge of planking, to ilustrate caulking. popeye the sailor, yvesvidal, coxswain and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Jim Lad Posted April 7, 2020 Share #28 Posted April 7, 2020 Can't wait to see the deck being laid. John popeye the sailor 1 Quote Link to comment Share on other sites More sharing options...
Sundt Posted April 8, 2020 Author Share #29 Posted April 8, 2020 Ship ahoy. I glued the center plank first, need more research on the web, watching pictures and youtube. To get a idea of the layout. No need to be 100% My boat will have around 48 deck planking, the original colin archer have 45. Two evenings work made 5 of 48. I hope the idea of permanent marker on the edge of wood planking looks good then finished 😉 coxswain, GrandpaPhil, hof00 and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Sundt Posted April 15, 2020 Author Share #30 Posted April 15, 2020 The access hatch is finished, all planks glued on middel part of boat. I adjusted the hatch plywood to match the planks glued on, see pictures with pencil pointing on cap. I will try to add some rubber later for waterproofing? Only 8,33 planks both side of hatch left 😉 yvesvidal, Timmo, coxswain and 2 others 5 Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.ee4d205046163acd786c8b7e92026d43.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.