gsxdent59 Posted May 18 Author Share #91 Posted May 18 The mizzen mast is ready now and all shrouds are placed. Continue with threads between masts,according to the plans and number of thread. catopower, chris watton and Thukydides 3 Quote Link to comment Share on other sites More sharing options...
gsxdent59 Posted August 5 Author Share #92 Posted August 5 Now we procced with the stays between the masts using thread 0,80 mm. A lot of work with blocks and eyebolts. Ronald-V 1 Quote Link to comment Share on other sites More sharing options...
gsxdent59 Posted September 8 Author Share #93 Posted September 8 Now i have put in place the stays,long threads from top of the mast to the free deadeyes, after i use most of them with the shrouds. There are 11 threads for the three masts for left side and another 11 threads for right side. I use thread 0.50 mm brown. Now all deadeyes are occupied.Is time now to put in place the yards that i have allready finish. Starting with the lower yard of foremast, put in place for each one, all the threads 0.15mm that the manual show. Hartron and Mawa 2 Quote Link to comment Share on other sites More sharing options...
gsxdent59 Posted October 13 Author Share #94 Posted October 13 All the yards from the fore mast are in place permanent with all threads that they need. Now the work around the model is more difficult, because i can damage the yards working with other threads. I must be carefull with my arms. Now we proceed to make the same job in the main mast Hartron 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.