Script Posted April 7, 2020 Share #1 Posted April 7, 2020 So ..... I had started a log a few days ago and realized it was a pretty sloppy job....some pictures of a hull and excuses so here I am starting again..... Bought the kit about 7 years ago along with the upgrade brass cannon and figurehead from Chuck at Syren. It was fortunate that I was able to find the little brown envelope with the cannon and figure since it wouldn't fit in the box and had been moved around for the last seven years. The following are photos of most of the parts, instruction manual, plans, partially started model and my work area. this is an excellent kit. My previous Model Shipways experiences gave me confidence to purchase this when I did. This strange time means a slight adjustment to build order. No balsa (have ordered some) means I am bypassing fairing the hull for now and proceeding with some other steps. Once i remember how to do so, i'll insert pic explanations by the appropriate picture...for now....here's my start! gieb8688, Edwardkenway, Tigersteve and 11 others 14 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Edwardkenway Posted April 7, 2020 Share #2 Posted April 7, 2020 Hello script, I'm going to sit in on this one!😀👍 Script 1 Quote Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED Link to comment Share on other sites More sharing options...
Script Posted April 7, 2020 Author Share #3 Posted April 7, 2020 Hi Edward, Thanks for looking in! Although I may not do something every day, under our current circumstances it will probably be a lot more often than weekly. I shall try to keep it interesting! Just got notice of shipment of my balsa wood for hull filler.....! Regards, Jim Edwardkenway 1 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Script Posted April 8, 2020 Author Share #4 Posted April 8, 2020 A little progress while awaiting the balsa........ Got started on the planking of the Beakhead Bulkhead at the Bow...Hmmmm....that could be the name of a PUB!!! Jonny 007, gieb8688, GrandpaPhil and 1 other 4 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Script Posted April 9, 2020 Author Share #5 Posted April 9, 2020 Started on the gun port sills....... being left handed, I started on the starboard side before I noticed. Presumably this wont make any difference. Still waiting on balsa...... gieb8688, Edwardkenway, ccoyle and 2 others 5 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Script Posted April 11, 2020 Author Share #6 Posted April 11, 2020 Finished the gun port sills and now ready to start the lintels. The instructions mentioned a 3/8" strip provided but either I lost it our just could not find it so I did the two 3/16" strips glued together as shown. Feels like progress! Also........balsa has arrived so now I can get back to fairing..... Jonny 007, GrandpaPhil, JpR62 and 2 others 5 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Script Posted April 12, 2020 Author Share #7 Posted April 12, 2020 Gun Deck sills and lintels completed.......now on to the quarterdeck. I do have a bit of cleaning up to do on the beakhead bulkhead planking.....doorways are not finished.....going to do more up shooting to see what I miss since most of the time one is looking down at a project..... And then on to adding balsa support for planking and fairing gieb8688, Peter Bloemendaal, Jonny 007 and 3 others 6 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Script Posted April 15, 2020 Author Share #8 Posted April 15, 2020 (edited) Seems like all the shots look the same but there is progress...... Placed toprails and the finished the quarterdeck gun port side installations. Will trim out the framing tomorrow. Set up for marking the gun deck port sides and prepped most of the pieces. Also made my first balsa insert for the bow. Will finish it when the fairing begins in earnest. I did spend yesterday sanding all the sills and lintels smooth for planking. Just a side note to see who's out there. I can remember when one would be posting to a build log and could almost always find their log on the first two pages......searched to number four to find this one. I realize most of that has to do with replies to postings but it seemed easier to get through a review of most current logs and leave comments easily. I'm certain a big part of todays volume is associated with COVID19. It is always nice to know someone is watching........... Edited April 15, 2020 by Script Edwardkenway, gieb8688, Peter Bloemendaal and 6 others 9 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
yvesvidal Posted April 16, 2020 Share #9 Posted April 16, 2020 It is so nice to see another one of these rare projects. You are moving along quite well. Yves Script 1 Quote Link to comment Share on other sites More sharing options...
Script Posted April 16, 2020 Author Share #10 Posted April 16, 2020 Thanks for looking in, Yves! So another day, another stick or two. I am just about to the major fairing project....and am not quite sure of the process I'll use. Got power tools and all kinds of manual wood removal stuff.......I guess different areas will require different methods. After setting up the templates for the gun port sides for both the gun deck and quarterdeck, I spent this morning on installation of the sides. Chuck did an excellent job on the pieces and the jigs for the sills and lintels as there was minimal trim and adjustment. Got my other balsa bow filler loose trimmed as well..... GrandpaPhil, JpR62, gieb8688 and 4 others 7 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Script Posted April 17, 2020 Author Share #11 Posted April 17, 2020 Hance pieces have been added. Sweep port frames have been added. The next step will be cutting out the templates for the sweep port frames.... Will do some fairing and then perhaps tackle some of the stern work I've been avoiding......adjusting and aligning the window sills and adding the stern ports on the lower counter.... This is a very important area and I'm afraid I did not get the stern frames set right so may be doing a bit of deconstructing..... gieb8688, JpR62, GrandpaPhil and 3 others 6 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Script Posted April 20, 2020 Author Share #12 Posted April 20, 2020 So I did some preliminary fairing and then proceeded to set up and mark the sweep ports using the templates. Then I ventured to a place I have been avoiding.....the stern! When I first set up the framing and then used the template for the windows, the gentle sweep left me with a concave stern. My installation of the stern frames seemed right but I didn't pay attention to the concavity and installed the sills and lintels. My new plan is to rebuild the stern using the removed parts and adding whatever bracing is necessary. I'm going to use the laser cut transom to set up the openings and the add the sills and lintels from the inside......we'll see. yvesvidal, gieb8688, GrandpaPhil and 6 others 9 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Bossman Posted April 20, 2020 Share #13 Posted April 20, 2020 Script, nice to see another Confederacy in the works. Looking good! Edwardkenway 1 Quote Current build: Model Shipways “Confederacy “ Completed builds: Mamoli “Royal Louis“ Mantua “Royal Caroline” Scratch 1/4 scale gondola “Philadelphia” Scratch “Hannah” from Hahn plans. Link to comment Share on other sites More sharing options...
Script Posted April 20, 2020 Author Share #14 Posted April 20, 2020 1 hour ago, Bossman said: Script, nice to see another Confederacy in the works. Looking good! Thanks, Bossman! It's been quite a while since I've done a wooden ship and even longer for planking. I do appreciate the encouragement! And there will be some mistakes.... Thanks! Jim Edwardkenway 1 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Bossman Posted April 20, 2020 Share #15 Posted April 20, 2020 Script, we are in the same boat! I’m a bit ahead of you on the Confederacy. This is my 1st in 15 years ago. Mistakes? I can send you a list. Wood filler and paint covers a lot of them. Quote Current build: Model Shipways “Confederacy “ Completed builds: Mamoli “Royal Louis“ Mantua “Royal Caroline” Scratch 1/4 scale gondola “Philadelphia” Scratch “Hannah” from Hahn plans. Link to comment Share on other sites More sharing options...
Script Posted April 20, 2020 Author Share #16 Posted April 20, 2020 8 hours ago, Bossman said: Script, we are in the same boat! I’m a bit ahead of you on the Confederacy. This is my 1st in 15 years ago. Mistakes? I can send you a list. Wood filler and paint covers a lot of them. Yep......paint and wood filler...and excess wood from previous projects....... I cobbled up my effort for the stern ports and did a bit more fairing. Still have a lot of sanding on the on the gun deck and quarterdeck. Which will take me to planking the hull above the wales.... GrandpaPhil, gieb8688, Peter Bloemendaal and 4 others 7 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Script Posted May 4, 2020 Author Share #17 Posted May 4, 2020 yvesvidal, Peter Bloemendaal, gieb8688 and 2 others 5 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Script Posted May 4, 2020 Author Share #18 Posted May 4, 2020 Somehow I succeeded in deleting my previous post.....Oh well... Once I had built the (now deleted) plank bender and started the planking process, I discovered a long lost tool I had acquired years ago from Amati.....a plank bender! Then the planking began with with my not being able to find the right size planking for the wales......so I just used the 1/8" planks. My next change was to not do the sweep ports...I do still have the templates so can add them later but it seems my nerves were not up to the accurate trimming required. After completing the port side, I'm going to test some stains and prepaint the black strake and wale overlays black before installation. Before proceeding, there is a lot of sanding in my future................... yvesvidal, GrandpaPhil, gieb8688 and 4 others 7 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Script Posted May 19, 2020 Author Share #19 Posted May 19, 2020 Yes, at some point this will be a complete build! Finished the fairing below the waterline and then moved to staining and painting. Also added the transom to the stern. Since I had removed some of the stern frames they had to be trimmed and reset. upon review I set them out of order and will have to adjust before adding a stern rail. prepainted plack planking was added at the waterline. Edwardkenway, JpR62, gieb8688 and 3 others 6 Quote Completed Robert E Lee, Misisssippi riverboat Completed, HMS Victory Bow Section Completed, Wells Fargo Stagecoach...Picasa album.... Completed, Lackawanna tugboat converted to private yacht... Completed: Sopwith Camel, 1:16 Scale, Model Airways...at another location... Completed: 1961 Ferrari F-1 Sharknose Completed: (sorta) OcCre BR-18 Locomotive Completed: 1/35 Pz.KPfw.III Completed: Allerton Steam Pumper circa 1869 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.