Jump to content

Recommended Posts

Posted

can anyone please recommend a profile/contour gauge to copy internal details, its to help me get more accurate detail inside my 1/48 Enterprise hull

Its all part of Kev's journey, bit like going to the dark side, but with the lights on
 

All the best

Kevin :omg:


SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS.
KEEP IT REAL!

------------------------------------------------------------------------------------------------------------------------------------------------------

On the build table

HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023

 

On hold

MHS Britannic by Kevin 

SD 14  - Marcle Models - 1/70 - March 2022 -  Bluebell - Flower Class - Revel - 1/72   

U552 German U Boat - Trumpeter -

1/48  Amerigo Vespucci     1/84 - Panart-   

HMS Enterprise  -CAF -  1/48     

Finished     

Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - 

Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024

Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020

HMS Victory - Caldercraft/Jotika - 1/72 - Finished 

 Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 

Stage Coach 1848 - Artesania Latina - 1/10 -Finished 

Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat

Posted

Possibly a little unorthodox, but back in my old RC days I would form a thick bulkhead using my kids modeling clay and carefully lift it out and lay it flat on a sheet of paper and trace it. Made for a perfect fit every time.

 

Very useful when having to form several frames and bulkheads in fiberglass hulls that came in one piece and had no interior strengthening or divisions. 

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Posted

I found that the wire tools similar to what is shown here are finer but also a bit deeper/longer even this type makes a pretty smooth copy of the contour.  A simple "fairing" of the points marked onto the piecec being made to fit will make a very close fit.  The one drawback to this type of tool is the limited depth.  They can also be laid into the hull at an angle making the relative depth workable.  I have used these mostly to check symmetry.

Have also used Klean Klay modeling clay to precisely match the contour but have found that some sort of support for the clay is needed - an undersized bulkhead like piece of heavy card or polystyrene with the clay on the outer edge so that it's not distorted when removing it to transfer the contour.  Klean Klay is a non-drying clay that doesn't leave oil behind when removed and is often used to dam up areas when filling with expoxy or resin for reinforcements or making molds.

CONTOUR GAUGE CLOSE-UP.jpg

CONTOUR GAUGE.jpg

Kurt Van Dahm

Director

NAUTICAL RESEARCH GUILD

www.thenrg.org

SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS

CLUBS

Nautical Research & Model Ship Society of Chicago

Midwest Model Shipwrights

North Shore Deadeyes

The Society of Model Shipwrights

Butch O'Hare - IPMS

Posted

thankyou for the comments, very much appreciated 

Its all part of Kev's journey, bit like going to the dark side, but with the lights on
 

All the best

Kevin :omg:


SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS.
KEEP IT REAL!

------------------------------------------------------------------------------------------------------------------------------------------------------

On the build table

HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023

 

On hold

MHS Britannic by Kevin 

SD 14  - Marcle Models - 1/70 - March 2022 -  Bluebell - Flower Class - Revel - 1/72   

U552 German U Boat - Trumpeter -

1/48  Amerigo Vespucci     1/84 - Panart-   

HMS Enterprise  -CAF -  1/48     

Finished     

Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - 

Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024

Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020

HMS Victory - Caldercraft/Jotika - 1/72 - Finished 

 Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 

Stage Coach 1848 - Artesania Latina - 1/10 -Finished 

Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat

Posted

Thanks for the Klean Klay reference Kurt, I have never heard of it before. Apparently much nicer than my kids clay. But then I was "multi tasking" my kids toys.

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...