Daniel Filipe Posted November 24, 2021 Author Share #31 Posted November 24, 2021 Good evening. Placed the pieces together to check any anomalies. Will have to sand on the stern to fit smoothly. Nothing to worry about. GrandpaPhil and BobG 2 Quote Link to comment Share on other sites More sharing options...
Daniel Filipe Posted November 28, 2021 Author Share #32 Posted November 28, 2021 Well, did very little this week. I will start to plank these areas. Some weeks ago, i ordered some cannons just for curiosity. They are beautiful. I’m not sure if I’m going to use the small ones as the model suggests. (on the upper decks) In real life, it would be impossible to reload them, etc. The Model Shipyard golden hind doesn’t have the upper deck cannons. Anyway, some pictures below GrandpaPhil and Michiel Frirz 2 Quote Link to comment Share on other sites More sharing options...
Daniel Filipe Posted December 5, 2021 Author Share #33 Posted December 5, 2021 Good evening, today just sanded the B7 strips and placed the B13 in position. Not fully glued because i wanted to match the piece with the skeleton of the ship. Doing this, I have now some holes on the inside. I made everything according with the instructions.. But it’s fine, I will use my leftovers to close the holes. Baker, BobG, Lee J H and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Daniel Filipe Posted December 12, 2021 Author Share #34 Posted December 12, 2021 GrandpaPhil, Baker, ccoyle and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Baker Posted December 12, 2021 Share #35 Posted December 12, 2021 nicely done Daniel Filipe 1 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch To do : Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Si vis pacem, para bellum Link to comment Share on other sites More sharing options...
Jorge_Goncalves Posted December 13, 2021 Share #36 Posted December 13, 2021 Olá Daniel, Go slowly but with quality 🙂 Daniel Filipe 1 Quote Current build: L'Ambitieux - DeAgostini - 1:59 Completed: NRP Sagres - DeAgostini - 1:95 Link to comment Share on other sites More sharing options...
Daniel Filipe Posted December 13, 2021 Author Share #37 Posted December 13, 2021 5 hours ago, Jorge_Goncalves said: Olá Daniel, Go slowly but with quality 🙂 Sim 😄 Ainda não tapei os espaços que se vêm nas fotos. Estou quase lá.. vai devagarinho 👍🏻👍🏻 Quote Link to comment Share on other sites More sharing options...
Daniel Filipe Posted December 15, 2021 Author Share #38 Posted December 15, 2021 Good evening, I need your advise about this. So i’m planning to leave some hatches closed, the small F32 pieces are meant to be the hatches. They have a very small gap inside the square. Is that ok? Quote Link to comment Share on other sites More sharing options...
Daniel Filipe Posted December 15, 2021 Author Share #39 Posted December 15, 2021 I was thinking, in that time, while doing the final planking of the model, I can control the size of the hatches with the wood strips. 🧐 Quote Link to comment Share on other sites More sharing options...
Baker Posted December 15, 2021 Share #40 Posted December 15, 2021 This is how I made mine (Post 459) Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch To do : Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Si vis pacem, para bellum Link to comment Share on other sites More sharing options...
Daniel Filipe Posted December 15, 2021 Author Share #41 Posted December 15, 2021 (edited) Thanks 🙏🏻 Today was trying to fit this in a possible way. Edited December 15, 2021 by Daniel Filipe BobG, Baker and GrandpaPhil 3 Quote Link to comment Share on other sites More sharing options...
Baker Posted December 15, 2021 Share #42 Posted December 15, 2021 If this is glued strong enough 👍 Are you going to paint the inside visible wooden parts black ? Daniel Filipe 1 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch To do : Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Si vis pacem, para bellum Link to comment Share on other sites More sharing options...
Daniel Filipe Posted December 16, 2021 Author Share #43 Posted December 16, 2021 @Backer Yes, that’s the idea 👌🏻 First of all, I will close the holes on the deck and then I will proceed to the cannons. Very excited with this project. BobG and Baker 2 Quote Link to comment Share on other sites More sharing options...
Daniel Filipe Posted December 28, 2021 Author Share #44 Posted December 28, 2021 Good evening, the project slowed down just a bit. It’s Christmas time, more time dedicated to the family and to the job. Things get busier 😅 Besides that, i’ve started learning how to play classic guitar. I don’t think one life time is enough to do everything we want 🧐 Happy holidays to everyone, be very careful with the newest COVID variant. Let’s see what is waiting for us in 2022 🤞🏻 Quote Link to comment Share on other sites More sharing options...
Dziadeczek Posted December 28, 2021 Share #45 Posted December 28, 2021 On 12/4/2021 at 6:10 PM, Daniel Filipe said: Good evening, today just sanded the B7 strips and placed the B13 in position. Not fully glued because i wanted to match the piece with the skeleton of the ship. Doing this, I have now some holes on the inside. I made everything according with the instructions.. But it’s fine, I will use my leftovers to close the holes. Aren't you going to cover these "holes" with a waterway strip? Quote Link to comment Share on other sites More sharing options...
Daniel Filipe Posted December 31, 2021 Author Share #46 Posted December 31, 2021 @Dziadeczek Yes, I will cover them 👍🏻👍🏻 Quote Link to comment Share on other sites More sharing options...
Daniel Filipe Posted February 10, 2022 Author Share #47 Posted February 10, 2022 Good morning everyone, let’s start again! It’s time to cover the holes. Last month received a very small package with something beautiful. A small yawl for my Golden Hind, from Master Korabel. Baker, BobG and Gregory 3 Quote Link to comment Share on other sites More sharing options...
Daniel Filipe Posted February 14, 2022 Author Share #48 Posted February 14, 2022 Almost done. More sanding for tomorrow.. Spooky spoon and BobG 2 Quote Link to comment Share on other sites More sharing options...
BobG Posted February 14, 2022 Share #49 Posted February 14, 2022 Nice work, Daniel. This is going to be a very nice model. Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
Daniel Filipe Posted March 14, 2022 Author Share #50 Posted March 14, 2022 Ok, next step is: placing the gun carriages and the cannons with a black ‘background’. One is already in place. Baker and ccoyle 2 Quote Link to comment Share on other sites More sharing options...
allanyed Posted March 15, 2022 Share #51 Posted March 15, 2022 Hi Daniel Your model is taking shape and looking quite nice! Are the cannon from the kit? The reason I ask is that they look like a cross breed of the Armstrong and Blomefield guns from the 18th century rather than the bronze cannon from 200 years earlier. Looking at the OcCre kit of the HMS Diana 1794, it appears they use the same hybrid cannon in that kit. Allan Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
Daniel Filipe Posted March 15, 2022 Author Share #52 Posted March 15, 2022 Thanks Allan 👍🏻👍🏻 Regarding the cannons, I got them after starting the model. If they match the time period? maybe not, I’m no expert in this area and just wanted something more real than the ones that comes with the kit 😅 The website didn’t have much more options for the cannons. And yes, the Diana is a beautiful model! Best Regards, Daniel 😄 Quote Link to comment Share on other sites More sharing options...
Daniel Filipe Posted March 15, 2022 Author Share #53 Posted March 15, 2022 This is the idea, I will wait to start planking and then I can place the cannons. I have 4 small cannons that I’m not going to use and will test the burnishing liquid in one of them to verify the result. If I don’t like it, matte black and diluted gun metal will be the solution.. Baker 1 Quote Link to comment Share on other sites More sharing options...
Baker Posted March 15, 2022 Share #54 Posted March 15, 2022 16th century cannons info for ships of this size link to site https://www.academia.edu/20120786/The_Arming_of_Late_16th_century_Merchantmen._A_Masters_Thesis_from_the_Maritime_Archaeology_Programme_University_of_Southern_Denmark Pelican Post 206 Pelican Post 339 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch To do : Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Si vis pacem, para bellum Link to comment Share on other sites More sharing options...
Daniel Filipe Posted March 15, 2022 Author Share #55 Posted March 15, 2022 @Baker amazing information on the website, i must check it with a closer look. Used metal burnishing from AK Interactive for this and the result is this: Baker 1 Quote Link to comment Share on other sites More sharing options...
Daniel Filipe Posted March 17, 2022 Author Share #56 Posted March 17, 2022 Quote Link to comment Share on other sites More sharing options...
Daniel Filipe Posted March 18, 2022 Author Share #57 Posted March 18, 2022 Paying attention to this detail because in my previous model, this was a disaster 😅 Quote Link to comment Share on other sites More sharing options...
Baker Posted March 18, 2022 Share #58 Posted March 18, 2022 Just an idea I would fill the bow with filler blocks first. That will work much easier for planking Tomasz B and Daniel Filipe 2 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch To do : Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Si vis pacem, para bellum Link to comment Share on other sites More sharing options...
Daniel Filipe Posted March 18, 2022 Author Share #59 Posted March 18, 2022 @Baker Currently at the moment, I’m watching some tutorials on YouTube on how to plank properly. (The information I’ve found here on this forum was not so easy for me to understand). It’s time to improve something. It was not difficult to glue the plank on the bow. Thanks anyways 🙏🏻 Let’s continue. Baker 1 Quote Link to comment Share on other sites More sharing options...
Tomasz B Posted March 18, 2022 Share #60 Posted March 18, 2022 When i started planking first layer i did steam bend with my kettle. 😁 and then nailed them to the wooden board with proper shape...time consuming cuz they have to dry ... Daniel Filipe 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.