HMS Sophie by TBlack - kit-bashing Jack Aubrey's first command from the Vanguard Models HMS Speedy

[Keith Black]

Tom, nice to see the space above Sophie's deck filling with line. 

[Ian_Grant]

On 12/7/2024 at 9:00 PM, TBlack said:

in this instalment I've rigged the futtock shrouds and staves for the main mast, the jeer block/tye assembly, and the truss pendants. Anchoring the trusses to the deck is no problem and accomplished. The jeers, however, create a problem. The instructions have them tied off to the bitt in front of the mast. Toni Levine, in her wonderful tutorial, has them treated like the trusses with blocks and hooks to eyes at the bottom of the mast. Haven't decided which way to go yet. In any event, I'm going to rig the gaff next. And the catharpins will follow.

Your truss pendants look a little odd to me. I don't see a nave line supporting them.....is it just the angle of the photo?

[TBlack]

Ian, I'm not sure I understand why you think a nave-line is necessary. In any event, I followed Toni Levine's tutorial on how to rig the truss pendants. My version is not as neat as hers, but it's all there.

Tom

[TBlack]

10 hours ago, Keith Black said:

Tom, nice to see the space above Sophie's deck filling with line. 

Keith, maybe getting a little too crowded. Once I get the lifts rigged I can sort out the spaghetti.

TB

[Ian_Grant]

5 hours ago, TBlack said:

Ian, I'm not sure I understand why you think a nave-line is necessary. In any event, I followed Toni Levine's tutorial on how to rig the truss pendants. My version is not as neat as hers, but it's all there.

Tom

I thought nave lines were equipped in British ships of the period, like on Victory, as described by Longridge; but after looking in Lees it seems not. Ah, the mysteries of rigging.

[TBlack]

I've added the lifts for the fore lower yard, not according to the plan, but following Delph's example. Having those afixed, and the yard square, it allows me to put tension on the rest of the lines on that yard. Then I can fasten them to the bitt on the deck.

[TBlack]

I forgot to add that in securing the lift lines at their belaying point, I used a tip from Delph. He threads the line through the belaying pin hole and then inserts the belaying pin. Once the coil of line is draped over the pin you can't see how the line is really secured.

[Ian_Grant]

That's a great idea!