iMustBeCrazy Posted February 26, 2023 Author #61 Posted February 26, 2023 Unfortunately I stuffed up either my measurements or my gluing of the landing strakes and the sheers don't overlap the landing strakes properly. There should be a 1" (scale 1/16") overlap the full length but I finished up with zero overlap at E, F, G and at the transom. The stem and midships are fine. I Ummed and Ahhed for some time and finally decided to add some packers to make the sheer sit at the same height it would be if it overlapped and then when I fit the fender it will hide everything. Montaigne and bruce d 2 Craig. I do know, that I don't know, a whole lot more, than I do know. Current Build: 1:16 Bounty Launch Scratch build. 1:16 Kitty -18 Foot Racing Sloop 1:50 Le Renard HM Cutter Lapwing 1816 Lapwing Drawings Completed....: 1:16 16' Cutter Scratch build. Discussion....: Bounty Boats Facts
oakheart Posted February 26, 2023 #62 Posted February 26, 2023 19 minutes ago, iMustBeCrazy said: Glad your back, hope the eyes are good now. That planking looks really good, what is the finish you used? Tim Current Builds : Cutter "Speedy" 1828 from Plans by Bill Shoulders at 148 Bounty Launch - Scratch build - FINISHED 85 ft. Harbour Tug. scratch built from plans by Francis Smith. ( FINISHED but no build log for this ) HMS Lightning. kit bashed from Deans Marine HMS Kelly kit ( FINISHED ) yes at last....
iMustBeCrazy Posted February 26, 2023 Author #63 Posted February 26, 2023 2 minutes ago, oakheart said: Glad your back, hope the eyes are good now. Thanks Tim, they seem to be. 3 minutes ago, oakheart said: That planking looks really good, what is the finish you used? At this stage it's just a rough coating of shellac to seal it. CiscoH 1 Craig. I do know, that I don't know, a whole lot more, than I do know. Current Build: 1:16 Bounty Launch Scratch build. 1:16 Kitty -18 Foot Racing Sloop 1:50 Le Renard HM Cutter Lapwing 1816 Lapwing Drawings Completed....: 1:16 16' Cutter Scratch build. Discussion....: Bounty Boats Facts
iMustBeCrazy Posted May 17, 2023 Author #64 Posted May 17, 2023 Finally back to it, sheer strakes fitted and painted. Tomorrow I will find out if I've glued her to the mould. goatfarmer11, mtaylor, oakheart and 2 others 5 Craig. I do know, that I don't know, a whole lot more, than I do know. Current Build: 1:16 Bounty Launch Scratch build. 1:16 Kitty -18 Foot Racing Sloop 1:50 Le Renard HM Cutter Lapwing 1816 Lapwing Drawings Completed....: 1:16 16' Cutter Scratch build. Discussion....: Bounty Boats Facts
iMustBeCrazy Posted May 17, 2023 Author #65 Posted May 17, 2023 Ok, ok. I couldn't wait. She popped of pretty easy, just snagged a little on the plywood tabs holding the frames (see post #33), the cling film (saran wrap) worked great. A small amount of excess glue and I over bevelled the planks a little but otherwise she's good. Montaigne, bruce d, ccoyle and 5 others 8 Craig. I do know, that I don't know, a whole lot more, than I do know. Current Build: 1:16 Bounty Launch Scratch build. 1:16 Kitty -18 Foot Racing Sloop 1:50 Le Renard HM Cutter Lapwing 1816 Lapwing Drawings Completed....: 1:16 16' Cutter Scratch build. Discussion....: Bounty Boats Facts
iMustBeCrazy Posted May 20, 2023 Author #66 Posted May 20, 2023 Debating what to do about the colour scheme. The exterior I will probably paint white or white below the waterline, the interior I'm going to leave 'natural' but the wood seemed a bit too light (see first pic in the post above) so I took some shellac and added a touch of spirit based stain and brushed it on. Seems to have done the trick nicely. The stain bled through the plank joins in some places, but only enough to darken the seams a little. I could leave the hull with the current shellac finish without anyone noticing. AnobiumPunctatum, mtaylor, bruce d and 1 other 4 Craig. I do know, that I don't know, a whole lot more, than I do know. Current Build: 1:16 Bounty Launch Scratch build. 1:16 Kitty -18 Foot Racing Sloop 1:50 Le Renard HM Cutter Lapwing 1816 Lapwing Drawings Completed....: 1:16 16' Cutter Scratch build. Discussion....: Bounty Boats Facts
iMustBeCrazy Posted May 23, 2023 Author #67 Posted May 23, 2023 Mocking up the interior: bruce d, mtaylor, Montaigne and 4 others 7 Craig. I do know, that I don't know, a whole lot more, than I do know. Current Build: 1:16 Bounty Launch Scratch build. 1:16 Kitty -18 Foot Racing Sloop 1:50 Le Renard HM Cutter Lapwing 1816 Lapwing Drawings Completed....: 1:16 16' Cutter Scratch build. Discussion....: Bounty Boats Facts
iMustBeCrazy Posted June 8, 2023 Author #68 Posted June 8, 2023 Update time. Transom knees fitted, floorboards fitted, windlass chocks fitted, cap rails and thwarts made, windlass made. To do: Foredeck, there are several valid options but I think I'll go with framed with longitudinal planking. Thwart knees, iron or wood? Both the Bountys launch and large cutter had removable knees (and bolts), the cutters knees were stored in a carpenters chest - wooden knees would take up too much space so they were almost certainly iron - but the launch? Fender below the sheer strake. Cant frame in the bows. Mast steps and brackets, round or square lower mast? The drawings usually show round, the models square. Masts and sails. Oars. Rudder. Other stuff, probably. HB17, mtaylor, ccoyle and 5 others 8 Craig. I do know, that I don't know, a whole lot more, than I do know. Current Build: 1:16 Bounty Launch Scratch build. 1:16 Kitty -18 Foot Racing Sloop 1:50 Le Renard HM Cutter Lapwing 1816 Lapwing Drawings Completed....: 1:16 16' Cutter Scratch build. Discussion....: Bounty Boats Facts
allanyed Posted June 8, 2023 #69 Posted June 8, 2023 By far one of the finest looking ship's boats here at MSW Beautiful work Craig. Allan Montaigne, oakheart, iMustBeCrazy and 1 other 4 PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU
Montaigne Posted June 9, 2023 #70 Posted June 9, 2023 Looking very fine indeed! iMustBeCrazy, Knocklouder, mtaylor and 1 other 4
iMustBeCrazy Posted June 13, 2023 Author #71 Posted June 13, 2023 Fenders and port cap rail fitted. I need to finish the interior before fitting the starboard. oakheart, reilly, shipman and 8 others 11 Craig. I do know, that I don't know, a whole lot more, than I do know. Current Build: 1:16 Bounty Launch Scratch build. 1:16 Kitty -18 Foot Racing Sloop 1:50 Le Renard HM Cutter Lapwing 1816 Lapwing Drawings Completed....: 1:16 16' Cutter Scratch build. Discussion....: Bounty Boats Facts
oakheart Posted June 23, 2023 #72 Posted June 23, 2023 On 6/8/2023 at 11:00 AM, iMustBeCrazy said: Update time. That has turned out fantastically, congratulations. Gives us all something to strive to achieve. Tim mtaylor, Montaigne and iMustBeCrazy 3 Current Builds : Cutter "Speedy" 1828 from Plans by Bill Shoulders at 148 Bounty Launch - Scratch build - FINISHED 85 ft. Harbour Tug. scratch built from plans by Francis Smith. ( FINISHED but no build log for this ) HMS Lightning. kit bashed from Deans Marine HMS Kelly kit ( FINISHED ) yes at last....
AlfredoCampos Posted November 11, 2024 #73 Posted November 11, 2024 After your helpful comment, I noticed this build of yours which I had not yet seen. Absolutely beautiful and so inspiring! CiscoH and mtaylor 2
iMustBeCrazy Posted November 15, 2024 Author #74 Posted November 15, 2024 On 11/12/2024 at 4:07 AM, AlfredoCampos said: I noticed this build of yours which I had not yet seen. Absolutely beautiful and so inspiring! Thankyou. oakheart, CiscoH and mtaylor 3 Craig. I do know, that I don't know, a whole lot more, than I do know. Current Build: 1:16 Bounty Launch Scratch build. 1:16 Kitty -18 Foot Racing Sloop 1:50 Le Renard HM Cutter Lapwing 1816 Lapwing Drawings Completed....: 1:16 16' Cutter Scratch build. Discussion....: Bounty Boats Facts
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now