Kawasaki Ki-61 Hien "Tony" by ccoyle - Halinski/Kartonowy Arsenal - 1/33 - CARD

[ccoyle]

Last one for tonight -- control stick has been added.

 

[ccoyle]

Next bits. For reasons which I will not rehash here, I tend not to include internal framing on my canopy glazing, but for this model I will. Like the Curtiss P-40, the Ki-61 has glazing behind the pilot, and it also has two small glazed panels at the bottom edges of the windscreen. The internal framing provides additional substructure for gluing down the faux glass cut from an overhead transparency sheet. The frames are painted silver on their reverse sides just in case any should be partially visible once the exterior skins go on. You have to squint hard to see that the glazing is finished in this image, but it's there!

 

 

Believe it or not, I can FINALLY start work on the cockpit walls now, hooray! 

[yvesvidal]

Fantastic work on the glazing. I do not see any traces of glue on them... 🙂

 

Yves

[ccoyle]

55 minutes ago, yvesvidal said:

I do not see any traces of glue on them... 🙂

 

Because I wisely chose to show the starboard side!

[ccoyle]

I stumbled across this old photo of mine, for folks that lamented the dearth of VVS aircraft among my builds. This is a Yak-3 built from an Orlik kit. Photo taken with one of our very first, if not the first, digital cameras we ever owned.  

 

[ccoyle]

Brief update -- or rather "lack of update." Have just hit a little patch of low modeling mojo, hence the lack of progress. So, not a complete halt -- just a pause. Further updates to come, eventually!

[amateur]

continuing without fun isn’t any good.

We will patiently wait.

 

Jan

[ccoyle]

Remember the old adage about treating every sub-assembly as a separate model? Takes time, but it works. Here's a bank of setting levers. What do they control? No idea. 😂

 

 

Merry Christmas to all of you merry model makers!! 

 

[Keith Black]

 Thank you, Chris and a Merry Christmas and a Happy New Year to you and yours.

Edited Wednesday at 11:42 PM by Keith Black

[GrandpaPhil]

Merry Christmas!

[amateur]

Hi Chris,

 

Merry Christmas to you, and a happy 2026!

 

Jan

[Canute]

Merry Christmas to one and all. And best wishes for the new year!

[Geordie Tyne]

Merry Christmas!
 

Regards

 

[Dave_E]

Merry Christmas Everyone! 🎄

 

Dave

[Keith Black]

 

11 minutes ago, Dave_E said:

Merry Christmas Everyone!

Merry Christmas and Happy New Year, Dave.