Jump to content

Recommended Posts

Link to content is in signature
 

Introduction

This log is intend to be personal track record of first "serious" attempt to scratch building of my very old Cutty Sark kit, started long ago and forgotten somewhere in house, mixed with some personal observations and notes

Edits notes and remarks will be inserted later, to show points what are dangerous place (for dummy as me) to bump in undesired situation caused by in-patience, an-experience and God¨s will

I am not a master, rather novice with too much ambition, but think in MSW there is enough room for all of us to share and learn, to keep a good time together

My long lasting journey in wonderful world of ship modeling started long long ago in, I think, usual way. As almost every kid I tried myself in some cheep plastic plane models, fast and furious, short life each ( they can not fly...) Then after a while in paper car models ( my own creation), made about 30 pieces, no one leave ( they can not drive). Then, in a high school I made some no-name (or forgoten name) plastic kit ships, also no one leave ( they can not stay above heater ...). Last one, "Stella" ( Heller) died and rest in peace during cleaning dust few years ago

post-4738-0-98212300-1384338355_thumb.jpg

This little Heller model on some way entered me door to "yellow brick road": Heller original colors in kit, by my opinion, were on such a type that model rather looks as toy, so I experimented with colors to catch color of wood, added extra details on deck and extra ropes ... joy in playing, and obviously first sign with arrow to entrance for something that on MSW is called "dark side"

And then, once upon a time ... very long ago during the study of law, I make my first step for modelling ships in wood.

I got done Columbus Santa Maria (If I remember well, also TEHNODIDAKTA Pula, but I am not so sure about manufacturer from this time distance) , made it, with a lot of improvisation, and with extra added ropes which to me it belongs ... but it looked nice for me. In that time I do not know nothing about real ship modelling, made it without necessary thinking, with half of brain, and in unnecessary hurry. Santa Maria got her way with my first wife more about 30 years ago.


post-4738-0-84326300-1384338556.jpg

Somewhere on that days, my twin brother made little and simple Heller`s Cutty Sark, and maybe that moment I fall in love with sail ships and their beauty

post-4738-0-81658800-1384770320.jpg

Then I finished law study, went in Army for one year, Navy in Pula, Croatia, former Yugoslavia ... and that was this ...

35 years ago only "Tehnodidakta" from Pula had made wooden models in kit. ( It was impossible for us mortals to order and pay kit from other country, even to know something more about ships, models, modeling techniques, tools and so). I was delighted with that discovery, and I bought wooden kit with plans and materials for "Cutty Sark". If I remember well, only few models were there ( Santa Maria, domestic ship "Jadran", some ships from old Dubrovnik, Bounty - not sure, and some domestic smaller historical models). And as every youth, wanting to be different and to choose the greatest of offered kits, a beautiful and extremely complex model with many sails and ropes, I bought it, knowing not in what I am just entering. To say again, I did not know absolutely nothing about Cutty Sark, and having no idea what serious modelling really is

To write about Cutty Sark is unnecessarily, there is so much written and published, sure on much better way I can do. Also, She is still alive in her Museum

I started working on model in 1984. and it kept me up until 1985-6, when I met friend with a really nice model of Cutty done, and I realized - or should I do it right, or it does not work anyway. And she went in deepest dark in my attic to collect dust and to cry silently in her dark corner

Then came usual things: got a steady job, got a wife, divorced, abandoned study for doctorate, and another wife, and two little children, start and finish building my house, become a attorney, etc etc etc... and, after "only" three very fast decades, finally the time has come to proceed, if I do not want to watch TV or read a book, or work, and there is no other homework to do. Children ( 22 and 24) are not children any more, and they need me only for money ( joke), they are adults now with their own life ( students finishing their study) ... and, suddenly, I find that appears a few hours in day exclusively concerned only for me. Amazing discovery

In meantime, trying to interest my son, we (I) made some simply plastic, I think Revell Pirate ship toy Jolly Roger. Failed attempt, made in less than a week, but I enjoy making it

post-4738-0-48199300-1395752865_thumb.jpg

The real trigger of my come back in wooden ship modeling was a appearance in Serbia of DeAgostini`s specialized periodical journal ( in 100 appearances) with successive parts of galleon, and I like it very much, but do not like many simplification of details which are important for me. Drawing boards on the deck with a graphite pen ? No, thanks. Waiting two weeks for single part ? No thanks. And then I remembered that I already have a plans of Cutty, the one of the nicest sail ship ever. Of course, the one with the most complicated rigging ...

For difference, now, after 30 years I finally have a working corner and a mini-workshop in heat-room near the garage (and not to forget, continuous war with my daughters Persian cat and long cat hair eveeeeeerywhere).

All rest wooden parts were 30 years old, and they have dried up and became largely and almost unusable. In fact, there are left only plans, some old strips and veneer, and some plastic / metal parts that I should see if I'll ever use them.

So, I made up my mind, dig on mess of old things in attic of house, FIND Her, and a few months ago I started from the beginning, only with saved old blueprint sheets ( old misfit try of Cutty went in trash) with the big important difference that exists today „His Majesty the Internet“ and a millions of pictures of finished models and details of the models, which is of invaluable help. Not to forget , today in Serbia there are affordable many required tools like Dremel/Einhel tools, and so. A great help is the fact that "my" ship still exists reconstructed in Greenwich, and there are available many photos of her details for research


Edit on september 23.2013: At the begin of this month I find Campbell plans, and from that time my work goes mainly by them, and my dedication and way of looking to my work rapidly change from day to day

Beginning

And so ... my first brave steps toward swamp, with more braveness than a brain presence

I did not mention "swamp" accidentally. As time goes by, I decided to do some steps in building in my own way (?), not in way which is ordinary, and in sheets. (for example - making my own dead-eyes ( later - blocks ?) and, later - ropes, my way of planking, etc etc). What a confident fool ... but ... that is just me - whole life I discover hot water again and again ...

Later I discovered that sheets have mistakes and insufficient instructions, my hands and experience are mainly not precise as I want, patience ... what is that ? But they are much better than 30 years ago, and my imagination and improvisation still exist, and I learn every day

Really significant stage of my build is finding MSW, and here are first steps ...


First decision was that I do not want to pay somebody for laser cut. What then rest for me to do ? Using paper with photo copy of plans to transfer plan to plywood.

post-4738-0-05626200-1396251765_thumb.jpg

A "bit" of cutting and a "bit" of glue, and my way (?) to hold angle of 900 and to assume required stiffness skeleton for further work . Later, when time to mount deck come, I found that ship's ribs are not well drawn in plan, or I did not cut and mount them properly. Not provide proper and sufficient longitudinal and transverse slope of the deck. Yes, it will be quite a job to fit it

post-4738-0-13580400-1396251766_thumb.jpg


There was a lot of my unexperience in this , very very very significant stage of building. In POB building (I discovered later) the crucial thing is right dimensions, position and angle of ribs. EVERYTHING later depends. Consequences can be, and in my build are - catastrophic. Months of lost time trying to correct mess, and all time re-examining myself - was it better to go from start. If that happen - to hell with everything, and start over without more thinking. If you do not do this - be sure that at moment you think that succed in correcting one part, another part will protrude out and jump right on your hand. And when fix this, third part will hit directly to your face. And when fix this, you discover that first corrected part is not good. Some kind of perpetuum mobil and never lasting process. You will spend months instead week or two to make keel and ribs again, this time with thinking and measuring. And as you are impatience full running to start planking on this messed bulkhead construction, as I was, be sure that you will have great enjoyment in unnecessary work

And there is stern from one piece (it was corrected later in proper angles) - not just one correction, smart learns from others' mistakes, and fool ...

In that stage, I have not idea how complex are curvatures of whole ship, and how much time I have to spend on it ... to lose them ... and to find them ... and to lose them again ... And, oh, what a self-confident ... Later I concluded that keel is little distorted, mainly by "my way" of assuming "right" angles, but there is no way to correct this ....

post-4738-0-18747900-1396251767_thumb.jpg

Deck mounted with many previous corrections of ribs to assume slope. This was big big big MISTAKE. Right order is : first planking hull, and after that - deck mounting. See posts #240 and connected future posts. If you want to follow lines on upper side of ribs that lead to longitudinal and latitudinal curvature of deck, do not this. Deck can not be from one single piece of veneer 1mm width, as I did. You can not twist it in proper way. There is no way to do it. I tried, and result is - months of trying to correct mess and find lose lines. You can not correct it at all never again. So, better is to plank with strip by strip. For consequences, see later post
http://modelshipworld.com/index.php?/topic/2501-cutty-sark-by-nenad-m-tehnodidakta-19711983-campbell-plans/page-42#entry156687


Holder for dead-eyes and wedges in one peace, not in four parts as in plan. It is much easier ( ha, ha ha !!!) way to follow the line from planes. Also mistake from same reason.I lose proper lines of hull, and this hang over my head all the time ... And holders must be redone completly

post-4738-0-31357600-1371998303_thumb.jpg

Whole deck planting with veneer, also not in original plan. In original kit was wooden plate 2mm with 1mm deep and 1 mm wide grooves carved full-length of plate. I mounted that on old Cutty. What a joke !

First two pictures represent deck from kit, then part of a sheet, and at last picture is my try

post-4738-0-74771500-1372400804.jpg

post-4738-0-30185600-1372400813.jpg

post-4738-0-20634600-1396251769_thumb.jpg

post-4738-0-17549600-1396251768_thumb.jpg

 

  • Edit Martch 31. 2014 : Fore and Aft deck - third time re-planked, main deck - second time re-planked

 

Fool made dead-eyes rather than use plastic from kit ( For details - post #16). 66x designated only above deck. There will be so much more latter. Enormous work, and enormous lost time. Yes, I have to make them again in better way

post-4738-0-45495500-1371998453_thumb.jpg

And twisted rope handmade instead wire. More elegant an more real, as I thought - obviously on that time I had no right idea what all this will be to the end

post-4738-0-53216900-1371998486_thumb.jpg

Plastic dead-eye from kit at left, and self-made in center and right on picture

post-4738-0-54312000-1396251763_thumb.jpg

Preventive cover with light sadoline, and view from the future bow - Once again mistake, I had to remove all traces of sadoline

post-4738-0-51737800-1371998561_thumb.jpg

And then, when I join to MSW, was a time just start planking, planking, planking ... and to discover that ALL first moves on this chees table are just - wrong

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Welcome to MSW, Nenad.  Cutty Sark is on my list of "someday" models, so I will be watching your process with great interest.

 

Your life story sounds familiar, so many things to get between a modeler and his build.  I'm glad you are able to find some time now to pick up on it.

 

Wow, that is a lot of deadeyes for setting up a single mast  - I forget how complex these beasts can be.  Enjoy the process and please share your progress!

 

Bob

Current build -- MS Bluenose

Future build - MS Flying Fish

 

"A ship is safe in harbor, but that's not what ships are for." - William G. T. Shedd

Link to comment
Share on other sites

A great start Nenad and a good idea to put in the deadeye chains before the bulwarks on the Cutty Sark! I love this ship and hope someday to make one. What scale is your model?

 

Matt

Link to comment
Share on other sites

welcome to MSW Nenad! Cutty Sark is such a beautiful ship, definitely on my list to do one day. It looks like you are off to a good start and it like it might be quite a large model. What scale are you building to? I would love to build a really big model Cutty Sark. I will pull up a chair and watch.

 

John

 

 

 

 

 

 

 

 

 

future build: to finish Mary Rose

http://modelshipworld.com/index.php/topic/8507-mary-rose-by-tarbrush-scale-172-1545/?hl=%2Bmary+%2Brose

 

 

completed builds:  Constructo Steam Launch Louise

Link to comment
Share on other sites

Tanks for nice wishes. Ill try to get the best from me. I dont know scale, because kit I bought 1983 was made 1973 and had ONLY nine sheets, some peaces of wood and some peaces made of plastic or metal. Dont forget that 1973 Yugoslavia was socialistic poor country. No instructions except for painting !!! But measuring on sheets are 1:1 with dimensions of ship approximately : 110 cm x 75 x 25. Tomorrow I shall get exact dimensions.Sorry for my bad English. Here is today progress, two hours of work

 

 

I have exact dinensions : 92 cm (including bowsprit x 55 cm x 24 cm , and it seems to be 1/96 scale (?). Quotation from Wikipedia:

General characteristics Class & type: Clipper Tonnage: 975 GRT[1] Displacement: 2,100 tons (2,133.7 tonnes) at 20 ft (6.1 m) draught Length: Hull: 212 ft 5 in (64.74 m)

LOA: 280 ft (85.34 m) - with notice in link LOA - For sailing ships this may exclude the bowsprit and other fittings added to the hull.

 

 

and it means, as Hull + bowsprit = 85,34m, and on model = 92 cm - then scale is 1/92 ???

 

Who knows

 

 

EDIT at December 14th 2015 - important notice

 

As a payment for inexperience, almost three years after this stage, I discovered my old ( new) mistake about this method of planking. Even it enabled me to get nice surface easy to shape, when time comes to think about Her standing and way to fix standing on hull, problems appeared, caused with another mistakes (to much dedicated sanding thinned keel to 3mm) and softness of balsa. See post #2737

post-4738-0-09630600-1370642949_thumb.jpg

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

I must add some extra ribs to ensure right and smoth line of curvature. 

post-4738-0-73475400-1370813231_thumb.jpg

Edited by Nenad M

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

And here is what I mean and why

post-4738-0-63837900-1370848211_thumb.jpg

Edited by Nenad M

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Next step

 

post-4738-0-39878700-1370979501_thumb.jpg

Edited by Nenad M

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

I'm just curious... why are you planking using very short strips?  Usual procedure is to use long strips covering several bulkheads.  It gives a fairer (smoother) run to the planking.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Yes, I was wondering the same question. You will save on sandpapering if you have a continuous plank. 

 

 

I'm just curious... why are you planking using very short strips?  Usual procedure is to use long strips covering several bulkheads.  It gives a fairer (smoother) run to the planking.

 

With a tools I have, I do not see another way to distort and warp a long strips exactly on right place and on the way I want, Beside of that, in same start of working, I made first important decision - do I make a museum quality model, or do I make a model to enjoy making it to be a beautiful as much as it can be. I do not have skill level for museum model, and that is so

Edited by Nenad M

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Good plan.  If you're interested, have a look here: http://modelshipworld.com/index.php?/forum/14-building-framing-planking-and-plating-a-ships-hull-and-deck/ at the first three posts (they are pinned).  This one here: http://modelshipworld.com/index.php?/topic/353-planking-instructiontutorial-by-jack-nastyface/ might be of some help.  Maybe not on the Cutty but for your next one.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Hi NenadM,

 

Thanks for posting this. Some years back I bought a Constructo Cutty Sark Kit, and after the first part of building and planking, I ran into a huge problem on the bow - mine looks like something on an ice-breaker rather than a clipper. And, like you, life got in the way.

 

I've been "lurking" on MSW for a while now, and a few days back I actually got as far as getting my poor model out from where it was hiding, and into the light (on my desk) so I can get up the courage to resume work.

 

So it's nice to have someone else to share the build with!

 

Best of luck with your build, I'll be following with interest. Thanks for getting my interest back!!

 

Cheers from a very cold Jo'burg

Regards,

 

Dognut.

 

Currently building - Cutty Sark 1:115- Constructo : First build

Link to comment
Share on other sites

Hi NenadM,

 

Thanks for posting this. Some years back I bought a Constructo Cutty Sark Kit, and after the first part of building and planking, I ran into a huge problem on the bow - mine looks like something on an ice-breaker rather than a clipper. And, like you, life got in the way.

 

I've been "lurking" on MSW for a while now, and a few days back I actually got as far as getting my poor model out from where it was hiding, and into the light (on my desk) so I can get up the courage to resume work.

 

So it's nice to have someone else to share the build with!

 

Best of luck with your build, I'll be following with interest. Thanks for getting my interest back!!

 

Cheers from a very cold Jo'burg

 

 

Dont give up. There are usualy surprising results if you apply some tips and tricks

Edited by Nenad M

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

How to make dead-eye by your own, step-by-step. Use only hard wood (oak, ash, beech) , for instance - rest of parquet, and patience patience patience, and steady hand

Edit on October 04. 2013:    Now, when I have mounted bulwarks, I am not sure if it was good idea, they seems little bit larger than it could be. Pretty crowded around them, and they are not in line

post-4738-0-30677000-1371209969.jpg

post-4738-0-29547300-1371209970.jpg

post-4738-0-74077300-1371209970.jpg

post-4738-0-21706000-1371209971.jpg

post-4738-0-78217000-1371209971.jpg

post-4738-0-27217200-1371209972.jpg

post-4738-0-92640700-1371209972_thumb.jpg

post-4738-0-96677100-1371209973.jpg

post-4738-0-89458400-1371209974.jpg

post-4738-0-96152200-1371209975_thumb.jpg

Edited by Nenad M

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

looks like your having fun.......:)   this hobby is meant to be done slowly.......just do what you can,  when you can.   I've done a few old kits in my day.......my first one was 20 - 30 years old,  when I got it.  the wood was like sawing concrete...but I used it anyway.   good to have you aboard.......check out some of the tutorials they have here,  I believe you will find them useful.   I'll be keen to follow along!  ;)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Finally I go on. Not bad. Evidently it will be some corrections

 

 

Edit on October 04. 2013 :  "some" corrections ???? Rather - some months for corrections

post-4738-0-47847800-1371238820_thumb.jpg

Edited by Nenad M

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

You're having fun, I hope.  The ship is going well, but real life and work do seem to come first for many of us, myself included.   Looks good.  Keep up the good work.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

That will come out o.k with some sandpaper and wood filler.  I assume you are going over it with a second layer of planking.

 

Yes Brian, that is the plan exactly. Narrow veneer upside, copper brass or zinc foil downside. Just as on the Cutty sark in Greenwich. But there is so much to do until I rich that phase. Thx for your interest

post-4738-0-45597200-1371303887.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Little joke: "Almost" Cutty Sark in her "dry dock" in Belgrade .... :) Finally, I resolved problem how not to damage sensitive small parts during planking. Styrofoam packaging for electric cooker has found a new use.

post-4738-0-23603000-1371375649_thumb.jpg

post-4738-0-94326000-1371375651_thumb.jpg

Edited by Nenad M

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

And it seems to be OK... one day. Proud stern line

post-4738-0-04880600-1371410523_thumb.jpg

Edited by Nenad M

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

making some good progress Nenad.........keep going!  ;)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

I like it.  Cutty is starting to show her lines.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Today progress. Next time, evidently, I`ll have some kind of provocation with narrow bow and its sharp lines. I like challenge

post-4738-0-63775600-1371504402_thumb.jpg

Edited by Nenad M

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

The draft is unclear. Do you think that I understand it correctly?

post-4738-0-37172700-1371628225_thumb.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Hi and welcome to MSW.

 

Am enjoying your build of the Cutty Sark. Glad you are enjoying the build. You are making excellent progress. When you are finished with your model you will be amazed at how wonderful she looks. The rigging will make you dizzy.

 

I was in London last week and went to Greenwich to tour the Cutty Sark, the most beautiful of all the Clippers, so they say. When at sea in 1870, she was crewed by 27 men. An amazingly small number of men for such a large sailing craft. Even more amazing, after she was cut down losing her sky and stunsails, she was handled by a crew of 19 in 1880, wow! 

 

Wish you well as you move along.

 

Cheers,

 

"Standards set are standards met".

Edited by hopeful
Link to comment
Share on other sites

Pressure of work continues ...and continues ... seems not to be the regular weekend. Generaly, to be honest, this situation is not bad because at the end of June start two month period when courts do not work in Serbia, and I shall be full of work all the summer long, but .... I am also a living man with another needs and wishes except working

 

I am shamed. I stoled some time from myself ... and my Cutty start showing her elegant bow and powerfull side

 

And I am happy (even today) and can go to sleep

 

post-4738-0-48806200-1395230097_thumb.jpg

 

post-4738-0-80891300-1395230126_thumb.jpg

Edited by Nenad M

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

cheer up....you'll get there ;)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Hello NenandM, I think that in your situation don´t care, if you have such free time to work, because I like your technique and good step one by one good fugured out.

 

Pavel

Edited by klimi
Link to comment
Share on other sites

Thx for support. I hope tomorrow evening to finish right side planking

Edited by Nenad M

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...