Jump to content
New Publication - Ship Modeler's Handbook - They're back in stock! Thank you for your patience. ×

mtdoramike

Members
 View Profile  See their activity

  • Posts

    2,085

  • Joined

  • Last visited

 Content Type 

Everything posted by mtdoramike

  1. mtdoramike
    I happily await pictures. If your Ana was anything like my AL Victory, you will have to shim numerous frames in order to get the planking to lay properly.
  2. mtdoramike
    They about 95mm or 3 3/4 inches long. But 4 inch boats would work as well. I also have contemplated replacing these with wooden life boats as well and have thought about scratch building my own. But with a bum ticker and limited time left I figured my time would be better spent doing something else and since this model is being built as a donation, I want to make sure I finish it while I still can. I also have another model waiting in the wings that I hope to have time to build as another donation. Mike
  3. mtdoramike
    Here is an updated picture of my progress on the Vic. Please excuse the mess. I try and clean up the work area once every couple of weeks. But when I do, I can't find anything for days afterward. I like to call my work area structured chaos. Mike
  4. mtdoramike
    Yes, it comes with three metal boats that require planking. The kit also includes sails, which is a major advantage if you intend to build it with sails. Most kits back in the day didn't include pre made sails. I got pretty good at using my wife's sewing machine and also hand stitching :rolleyes:Here is a picture of the bare boats unfinished.
  5. mtdoramike
    Very nice planking job, I can't wait to see how the build goes. Mike
  6. mtdoramike
    commercial@artesanialatina.com addressed to Ana . No, Latina kits don't supply the copper sheeting. This is something you have to buy separately. I used 1/4 inch copper foil tape cut into 3/4 inch lengths. Mike
  7. mtdoramike
    Ron, I cut my Strips at 3/4 inch long and the tape is 1/4 inch wide. Laying the tape makes quick work of the coppering, I can usually copper a ship in a couple of evenings.
  8. mtdoramike
    Hi Ron, the scale is 1:84, which equates to about 49 inches in length when finished. The Copper tape is 1/4 inch in width. It cost about $7.00 a roll from Hobby Lobby and takes a tad over one roll to finish the model. This is the same tape that stain glass folks use, which is also called copper foil tape. I have used this tape a numerous models that I have built and find it the best alternative to purchasing actual copper plates from places like Cornwall Models and spending $75.00 and up. Mike
  9. mtdoramike
    Thanks for posting Pictures of the box and contents. I love Constructo kits because of the quality of the parts and woods used. The instructions leave a bit to be desired and sometimes the plans lack a bit of clarity, but their kits make into nice models. You just have to remember while building a Constructo kit that they only supply the basics and if all you are looking for is a nice wall hanger then you will not be disappointed. If you are looking for closer to a museum quality model, then you will have to put in extra time, materials, research and expense. Good luck with your build, I look forward to following it. Mike
  10. mtdoramike
    It looks very good. If you aren't happy with the final result, you can always paint the hull. If I were building it I would most likely paint it anyway. I was unaware that Constructo made a Robert E Lee paddle wheeler kit. I'm glad to see it. Thanks. Mike
  11. mtdoramike
    Has there been any progress on your build? Mike
  12. mtdoramike
    I've built over 20 ship models in the past 15 years and still own the original first model that I ever built (HMS Bounty) and used strictly CA and white wood glue and have never had an issue with failure that you speak of. Now once a model gets 30 years old and older, most any glue will fail. I have repaired models built back in the 40's and 50's for people and yes there were some issues with glue failure, but that was well before CA glues were invented or used. But I used CA glues on the repaired parts and well over 10 years and they are still in great condition without failure. All models that I have repaired or built and sold have a lifetime repair policy offered by me and as yet, I have never had an issue where I needed to honor that policy. But glue is like the use of tools, wood and anything else, it's a matter of preference. Mike
  13. mtdoramike
    I use the cheapest old crap I can find, both liquid and gel control. I usually use off name brands sold by Walmart. Now, my favorite is the Loctite Gel control that you have pictured. I really like the new packaging on this rather than the old tube style. You can run through better than $100.00 just in glue on a model. I have found that the name brands don't really out perform the no name brands. Mike
  14. mtdoramike
    Absolutely beautiful work. I built the original San Francisco from Latina, back when they supplied wood veneer strips for the hull, which was applied to a cheaper white wood planking as a second layer. If you don't mind a suggestion, In the future, sand the wood smooth first after you glue it down and once sanded, come back and nail in the nails. It will give a much nicer finish, especially since the Frisco uses the nail heads as adornment. Mike
  15. mtdoramike
    Very nice work.
  16. mtdoramike
    The ratlines look good, I use the heavy thread for the horizontal lines and a thinner thread for the steps going up the ratlines. It makes a cleaner knot. Floquil used to make and sell liquid tar that I would use to paint on the ratlines once completed, which took away the fuzziness of the thread and gave it a nice appearance. But you can't buy that stuff anymore.
  17. mtdoramike
    WOW, absolutely stunning work. I know you aren't really keen on The Constructo version of this ship, but you are surely making a silk purse out of a souse ear for sure. I always look at a ship model kit as a starting point and then go from there, realizing that there will need to be changes, modifications and corrections if historical accuracy is what you are after and not just a display piece. You are doing excellent work and the more I see you build taking shape, the more impressed I am. Mike
  18. mtdoramike
    What a real beauty she is too. I love this model, the natural wood look really shows her off nicely. WELL DONE!
  19. mtdoramike
    Mine are 1/4" X 3/4" width and length.
  20. mtdoramike
    I use the riveting tool on the copper side of the tape and run it along each edge of the tape before installing. I will pull 10 feet or so of the copper tape from the spool as I mark it with the tool. Then I lay the tape strips in full length layers on the hull in one solid piece if possible. Then I come back with a pencil and mark the tape and then score it with a hobby knife to indicate individual plates. It saves a ton of time compared to cutting the tape into individual plates and then installing. Start at the waterline and work your way down towards the keel. The rudder itself is plated the same, but with much smaller copper tape strips and is done before mounting to the model. I try to line up the copper plates on the rudder to the copper strips on the hull as best I can to give it more of a pleasing appearance. I have it mounted to the board so this was about the best that I could do.
  21. mtdoramike
    Hi Lawrence, a Happy New Year to you as well and I hope that you have great success with the Anna Parker. With your skill and dedication to detail, I don't see where you could go wrong. Yes, I would like your imput on my AL Vic review even if it's to point out flaws in the kit or things you chose to change with your build. I'll be looking for that cloud of saw dust after the New Year
  22. mtdoramike
    Hey Paul, Ebay. It is actually seamstresses pattern marking tool. I think you can buy them new on line. I had one that wasn't nearly as old as this one, but gave it away 6 or 7 years ago when I got out of ship modeling for awhile. I love using the cooper foil tape. It lays great and is quite a bit cheaper than ordering the copper plating. It took a tad bit over one roll to copper the Vic which was about $7.00 for a roll. The drawback is, that you have to do your own rivet markings. But if I ordered the Copper plating from Cornwall for the Vic, it would have cost a great deal more. I hope you and family had a wonderful Christmas as well. Mike
  23. mtdoramike
    Beautiful work.
  24. mtdoramike
    Oooooo, absolutely beautiful planking job. I love Constructo's woods that they supply with their kits. They make natural finished models look fantastic.
  25. mtdoramike
    This is copper foil tape, the same that the glass stain glass people use. The copper foil tape comes pre-glued on the back and goes on quite quickly. I lay a solid piece of tape down on the hull and once attached, I come back and score it in what ever length plates I'm going to use. Thanks for the compliments Here is a picture of the foil tape roll and the riveting tool that I use to make the rivet marks on the tape before applying.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...