Jump to content

YankeeD

Members
 View Profile  See their activity

  • Posts

    146

  • Joined

  • Last visited

 Content Type 

Everything posted by YankeeD

  1. YankeeD
    I think I would go for the least impact solution. Leave as it is and I would smuggle with iron of the hinges just as if it were how it should be.
  2. YankeeD
    Means you are still human
  3. YankeeD
    Wauw, just realise its been 2 months since an update. Now I also have been busy building other projects and some holidays. But some progress was made, so here he goes. I finished the deck planking and did some roping as later on I would not reach the knights head anymore. During the clamping of the inner planking a clamp spri=ung off. I was uncarefull in placing it so I had to repair the parts carefully. I used sanded dust and diluted glue as I did not want to replace the parts. I was quite succefull i think. Then I also decided to add the kitchen chimney. A wooden block was made to shape. Then 0.4 copper was used to build it and a edge of 1mm copper to complete the image.
  4. YankeeD
    Jim, she used and older email and it came through. Very strange why the h.oosterwaal@... does not work from your end, it does work for this forum's notifications?? Anyway, I was stupid and had my sliding table fell to the floor. Its bent now. Tried to remedy but alass. So decided to purchase a new one and use parts of the old one for some of my jigs. Sorry for all the trouble and thanks. Hans.
  5. YankeeD
    Jim, checked this morning, alass no mail. I think maybe Donna might be using an older email from me? I just send here another email at mmllc@cfl.rr.com Thanks Hans.
  6. YankeeD
    Thanks Jim, did not received it also not in spam. Will look out for it. Hans.
  7. YankeeD
    Hi Jim, As follows: "Thanks for your on-line order #200730MM24768001 at ByrnesModelMachines.com!" Regards and thanks Hans. ps also send an email to Donna after the order as for details/instructions on shipping.
  8. YankeeD
    Hi Jim, any luck of getting some time to look at my order?
  9. YankeeD
    Hi Jim, hows the work going? I put an order in week and half ago. Any indication as when it could be shipped? Thanks for having Donna take a look. Just so I know whats the wait. Thanks Hans.
  10. YankeeD
    Andre, I am building the 7 provincien and have (had) the same problems with the angle of the platforms (de mars). A lot of models show them quite angled whereas sometimes you see them horizontally. Angled is said te be for the fact that (mostly sweet rain) water will run down and away. But I also mounted them horizontally, which seems more logical and fitting to me. water will run away anyway with the platforms being rather open en the ship probably always rocking due to waves. further a very nice build. Rgds Hans
  11. YankeeD
    Nearly another month, time for an update. As I was working on the bowsprit I decided to finish all mast and all parts of the masts. Highest point reached!! Time for a beer Experimenting with rope, as it is nearing time to fix some rope. As I cannot reach that anymore after closing the deck. 1mm drill bit
  12. YankeeD
    Jim, What about a special consignment job to build me one? Not being able to build and ship 120V motor units could maybe leave you some spare hours :)? RGDS Hans.
  13. YankeeD
    Who again said: “Intelligence is the ability to adapt to change.”?
  14. YankeeD
    OK clear, thanks Jim. There are some on the market, but not as good as yours. I currently have the proxxon. its ok but as their table saw compares against your table saw, just a step down on the ladder. Rgds Hans
  15. YankeeD
    Jim as you provide a larger table top for the table saw is there a likewise option for the disc sander? I would be very much interested in a 250mm disc sized discsander Rgds Hans
  16. YankeeD
    As the new moth approaches time for another update. The first part of the deck, all between the strakes, had been finished, still dry fit. And I will keep it dry fit for some time as to keep acces to the orlop. I did some parts on the main deck, like the kolderstok. Also the Rusts for the putting irons were made And next was the bowmast. I still needed to make the bottom fitting square and making a holder for it. During this I found the mast not properly alinged and thatw as adjusted. Final and correct aligment now. Creating some other parts on the deck.
  17. YankeeD
    Indeed it is coming nicely together Marcus! By the way, hobbying outside in the sun is a joy
  18. YankeeD
    David, sorry for asking but shouldn't the stairs and pillars stand on the deck? They seem somewhat elevated now.
  19. YankeeD
    Very nice build 👍I will hop on for the rest of the ride.
  20. YankeeD
    Sorry no, I only build scratch. I just wanted to clear misunderstanding. shipping vice versa, UK and mainland is still as before, just EU rules.
  21. YankeeD
    In terms of taxes and import nothing has changed yet. Only by end of this year and only then if no agreement is reached on forehand. As far as I am aware that is.
  22. YankeeD
    Indeed she did Jim, just came in my time 19.52, crossed in between my 2 posts here. Thanks anyway. Will follow up with her, thanks!
  23. YankeeD
    Thanks Jim, order #200419MM38900158 And I asked by mail (remove by moderator) to add 1 extra adapter and to add 2 miter bars for the saw miter slots. Thanks for looking into it. Hans
  24. YankeeD
    Hi Jim, is there also an email problem? I put in an order for some accessories couple of weeks ago and also a reminder. No reply sofar. Could you lookinto it please? Thanks Hans.
  25. YankeeD
    No Marcus not selfmade. Bessey. Amongst here you can find them. https://www.superhandgereedschap.nl/product/parallelspanner-mt-1-36mm-bessey/?gclid=Cj0KCQjw-r71BRDuARIsAB7i_QNHe24SCgjOSfzT7rpOcK4HFeeTyKBU-YfHtKlM9ucSh0GK8fC2z8kaAubrEALw_wcB They will for sure be cheaper in US.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...