Jump to content

russ

Members
 View Profile  See their activity

  • Posts

    3,086

  • Joined

  • Last visited

 Content Type 

Everything posted by russ

  1. russ
    Carl: Thanks. That will be the final design, but I will probably make a new set when the time comes. Russ
  2. russ
    Lest ye believe I have given up, here is some small progress. Life got in the way for a while, but hopefully, I can manage some more progress now. Here are some temporary cradles I made for the model now that it is planked. I am also working on the pilot house. More later. Russ
  3. russ
    Ken: Well done. This is a beautiful model. Congratulations. Russ
  4. russ
    Ken: I would not have noticed the rework if you had not pointed it out. Very nicely done. Russ
  5. russ
    Thanks. Russ
  6. russ
    This is one thing I cannot bring myself to do. My lugger will not have any paint on the deck even though the boats always had a painted deck. I just cannot bear to cover up the deck planking with paint. I should, but I will not. Russ
  7. russ
    John: The shrimpers with whom In have spoken just called it a rub rail. It may be that some of them are not old enough to recall its exact purpose. I have seen many photos with the tire slung over the side. That may be the answer to Carl's question. This boat worked for Biloxi Canning so it would have been docked out front. You might be thinking of Cruso's which was around back near the old bridge. Thanks for the kind words. Russ
  8. russ
    This may represent a transition period between the use of the two rub rails. I have seen these wider rub rails on other vessels from other parts of the US and you can sometimes see them used as a foot hold as they move along the side of the boat at sea. Maybe they kept it on for that purpose. I will continue to ask around to see if there is an answer. Russ
  9. russ
    There has been a little more progress. This boat has two rub rails. I am told that the earlier boats had a single rub rail that was much wider than the hull planking. Later boats have done away with the wide rub rail and often have the thinner rub rail that is a bit thicker than the hull plank. This boat happens to have both of them. The thinner rub rail runs from bow to stern and was gotten out of a piece of square stock. The wider piece had to be cut to the curve of the hull and was a bit trickier, both to cut and to fit. I needed to install hidden pins along its inner edge to be able to attach it to the hull. Here are some pics. In the old photo you can see both rub rails. The rub rail is dry fitted on the model photos. I might yet thin its width slightly, just for scale appearance. Russ
  10. russ
    Your model is coming along nicely. The pin rails look good. My only worry is that they would come loose during rigging. I like to dowel or pin those to the side whenever possible. Gives extra strength where it is needed. Are you going to paint or tone the pins? Bluejacket has a brass brown toner that works well. Russ
  11. russ
    Very nice work on the eagle. You have done a great job working it into the scale of the model. Well done. Russ
  12. russ
    Are they brass? If so, you can anneal them to make them more pliable. Then you can "spring" them around the deadeye and squeeze them gently to hold the deadeye snugly. Russ
  13. russ
    This is a beautiful model. Congratulations on a fine piece of work. Well done. Russ
  14. russ
    Your rigging is coming along. These square riggers always had a lot of rigging. Each sail had as many as a dozen lines. Russ
  15. russ
    Good luck with it. Russ
  16. russ
    Thanks for your kind words. I appreciate it. I always hope that something I can offer will help another modeler some day. Russ
  17. russ
    Thanks. I appreciate it. Russ
  18. russ
    Elia: Thanks. I am pleased for the most part. Russ
  19. russ
    Kees de mol: Thanks for your kind words. Russ
  20. russ
    Carl: The model's length on deck is just shy of 14 inches. The scale is 1/48 or 1/4"=1'. Thanks for the kind words about the model. It is just store bought basswood. It needs careful handling. Russ
  21. russ
    Pat: Thanks. I agree. There is a much better sense now about how the bulwarks look with the rail on. Russ
  22. russ
    John: Thanks. Russ
  23. russ
    This evening was good for working in the shop. Got the rubrails on without too much trouble. They are made from a single piece of 1/16" square stock on each side. Russ
  24. russ
    Mike: Thanks. I am very fortunate to have access not only to documentation for these vessels, but a lot of local knowledge from men who actually work on these vessels. Russ
  25. russ
    John: Thanks. The port side went on this evening with no problems. It looks a bit more shipshape now. Russ

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...