bdgiantman2

I am looking forward to getting my hands on this kit after it gets released in several months, thanks for demonstrating this for all of us on here. Brian D

I'm not sure I understand what you mean by saying "a vessel way too sharp in form." Can you clarify please and thank you??

I have yet to be able to find these Spillane drawings available in my research online. The only stuff I have found was a series of pictures of a higher quality model of Brig Pilgrim by William Hitchcock around 1965 (https://lannangallery.com/products/ship-model-of-brig-pilgrim-by-hitchcock). When I inquired about any plans form those folks they said they didn't have anything. Thank you for the replies.

Here are two pictures I took of the model. Seems could be a solid hull model but at this point I am not certain. Have not yet even attempted to unscrew the stand from the ship. The topmasts definitely will need replacing, probably fell off a tabletop and snapped. One of the deck structures shows what looks like water damage as well, didn't take a picture including this.

Welcome from another Colorado resident!! I look forward to seeing your model and the progress you are making. Wishing you success in your model building.

Hello Randy (and Calvin), I was recently given a model of Brig Pilgrim (Boston 1825) from a coworker. This model is damaged and will be needing repairs which I am interesting in attempting to fix myself. So far I have been unable to find nor obtain any plans of this ship.

Interesting provision of early drawings there, Mr. Passaro as well as Greg. Looking those prints over, I am curious about that sail room. Not only does it look extremely small, but folding those sails to fit in that small room would have been heavy and cumbersome. My suspicion is that there is more of the sail room under the forecastle deck allowing the sails to fold and store more easily. Am I on the right track? Brian D

This ship model has been a delight to follow. I have come to like seeing those frames being visible, it would be a shame to cover them in my opinion. Those frames are so realistic and most public has no clue this is how real ships were made back then. Brian D

Your progress on this model is incredible, great detailing throughout this ship! Speedwell is definitely being done justice. I only hope I can make a model half as good as I progress along. Brian D

Atta boy!! Nice job making those hawse timbers for the bow, and your fashion pieces in the stern look great too. I am enjoying this blog

I'm seeing a ship!! She looks great, keep up this project

Your Portland model is coming along great, Joe. I'm impressed with the frames and hawse timbers. She's going to be very sturdy indeed. It seems to me looking at your support jigs that all three conveniently are about where the masts would be on this beast. Going to need to try this CAD program you are using even though I don't plan to do any woodburning. Brian D

As an amateur model builder myself, I do have a scroll saw and it is nice, however it looks to me more like a disc sander or oscillatory sander would be a greater addition.

I recall several years ago someone on here was making a diorama of a pirate 5th rate ship that had wrecked on a beach, I think it was before the recent crash of the site. I was looking for it and can't find it on here. Brian D

Hello friends. Merry Christmas to all and hope everyone is in good health and making progress on models. While I haven't made any physical progress on my ship model, there is plenty of other stuff going on to be telling about. Like I mentioned in previous post, I was give a mini table saw for my birthday. Haven't had a chance to use it yet, but I anticipate stuff soon. When I am able to get my USB drive issues fixed (the disk had the audacity to just stop working on me with no warning at all and many important pictures and CAD files on there) as well as lingering tool problems I plan to make sawdust again. Lots of research going on in the mean time. This past year, I acquired two books, The Anatomy of the Ship HMS Blandford (British 20 gun 6th rate) by Peter Goodwin and Le Cygne by Jean Boudriot. Both of these books have been very helpful and interesting. Blandford was the same length and number of guns as Eagle, but was ship-rigged (3 masts) and had a whole additional deck than Eagle making her taller out of the water as well as being a century prior. Cygne is smaller than Eagle but the same time period and also a brig configuration plus she also has the additional deck that Eagle didn't have, there are features about her decking and rigging that are very helpful. However, Brig Eagle has a wider beam than both of the European ships - about 7 feet wider than Blandford and a solid 10 feet wider than Le Cygne. Also been dusting off my very rusty CAD skills attempting to make drawings similar to some of you modelers - stalled for now again because of the USB issues. I know more CAD people are using SOLIDWORKS which I never learned about during early college years, but still plugging along. So anyways, that is what is going on for now and probably will be waiting for better outdoor conditions. Brian D.

Did you make the CAD drawings yourself or is there some way to get these imported? I have done CAD work in the past, but never been able to get those before. Brian D

Hello friends. I know it's been a long time since I last posted on this project. Yes, I am still alive and following different projects on this site. Been primarily working, and I am hoping to purchase some wood soon and get back on this project. For my birthday just over a month ago, I was given a new mini table saw by a Chinese company that I am really hoping will help making some of the cuts wanting to make. Likely will still need to get the larger Byrnes saw at some point but right now that is beyond what I am able to afford. I would like to take dedicate the rest of this build to an influential mentor, Ed Quam, who passed away on August 19th. He was a very skilled builder and was an encouragement to me. I just hope that my progress will do him proud. Peace ✌️, and hope everyone had a great Thanksgiving 🦃and wishing everyone an early Merry Christmas 🎄 Brian D.

Stores like JoAnn's and Michael's sale dollhouse accessories, some in 1:48 scale. I have seen online ability to purchase kettles that scale.

Very realistic blocks you have made for adjusting the tilt of the mast, a detail rarely seen on many models. Great progress, sir! Brian D

If by "shaded" you mean colored and looking older, I have heard of modelers using tea or coffee to color the fabric. I think it was short submerges and let dry until you get a color desired. Brian D

I have to admit that I don't have the books from SeaWall to know better, but I am curious if you and especially Chuck will be doing any interior on this model. Progress is looking great, Mike. You are a very skilled model maker and this has been a great treasure to follow. Kuddos Brian D

Gonna have to invite myself over to your place for breakfast after a teaser like that, even if the cholesterol levels are off the charts!! 😋 🤣 Seriously, your Niagara rigging is looking great, you are really coming along on her. No progress at all for me with my model ship, in fact I'm going backwards.

Great display case for a museum grade model! Both items are beautifully made. As for lighting, I admit I don't know much but am wondering if an aquarium light fixture would be a solution. I think most of the florescent bulbs would be non-intrusive but honestly not sure.

That is one ambitious project you are undertaking, Joe! So far looks great, HMS Portland really compliments Winnie side by side. Soon it will be our favorite time with this hobby - the endless sanding and fairing. I am enjoying this build and keep it up! Brian D

The white window frames look really good and authentic in my opinion. Nice progress on your ship. Brian D