Garward
-
Posts
1,572 -
Joined
-
Last visited
Reputation Activity
-
-
Garward got a reaction from Archi in Methods for making Treenails
Birch treenails, Bronze 24-pdr canone Le Fleuron model
http://modelshipworld.com/index.php?/topic/454-24-pdr-bronze-gun-le-fleuron-1729-by-garward-m-124/page-3
-
Garward got a reaction from Archi in Methods for making Treenails
Continuation
Bamboo treenails, Montanes model
http://modelshipworld.com/index.php?/topic/82-montanes-by-garward-occre/
-
Garward got a reaction from Archi in Methods for making Treenails
For imitation of nails the toothpicks which ends are pierced to diameter 0,5мм by means of a drill and the adaptation in the form of the brass cylinder with a flat bottom thickness 3мм on which center the opening by diameter 0,5мм is drilled are used. All these operations are done before installation of decks
on the hull.
-
Garward got a reaction from ianmajor in San Francisco 2 by Garward - FINISHED - Artesania Latina
Thanks for an assessment of my work! It would be very good to have 10 people of assistants, then it would be possible to construct much more models ! Unfortunately, it is necessary to use only own hands.
-
Garward got a reaction from Robbro in What is the best glue for cast metal parts?
СA is better to glue metal details, but thus surfaces have to be pure, and amount of glue minimum (literally droplets). Surplus of СA when drying gives a white raid.
-
Garward got a reaction from vas1949 in What is the best glue for cast metal parts?
СA is better to glue metal details, but thus surfaces have to be pure, and amount of glue minimum (literally droplets). Surplus of СA when drying gives a white raid.
-
Garward got a reaction from vas1949 in What is the best glue for cast metal parts?
On a photo the template from aluminum for production of a framework of gun ports is shown
http://modelshipworld.com/index.php?/topic/82-montanes-by-garward-occre/page-2
Motionless details of a template are stuck together among themselves CA (capacity with CA is visible on a background). The template sustained production of several tens framework and further is suitable for use.
-
-
Garward got a reaction from butch in TABLE SAW
In the course of Montanes construction for production of details I used available for me jig saw (table saw) - self-made "minifactory" for thin laths and an interline interval, FET PROXXON for thickness to 20 mm and MJ10200J Feida for thickness to 40 mm). I have come to a conclusion about necessity of construction jig saw, deprived, whenever possible, lacks of the listed units (the design features sometimes essentially complicating operation; time and the efforts spent for maintenance of accuracy of a cutting; the big noise etc.). In particular, at FET saw a disk – tightening the screw constantly so gets jammed the extremely unsuccessful knot of fastening that I already two times had to cut off its head, differently a disk was not to remove (the same lack marked also others modellers).
Initial ideas of construction were:
- The basic range of a cutting – wood in the thickness from 0,5 to 20 mm;
- Accuracy of a cutting 0,1мм;
- A cutting under various corners;
- Table adjustment on height;
- Reliable knot of fastening a cutting disk and simplicity of its replacement;
- The stock of capacity excluding (reducing) overheat of the engine at long work;
- Noise reduction.
As a result of viewing and the analysis of a considerable quantity of descriptions industrial and self-made jig saw at me the design shown on a photo has turned out http://modelshipworld.com/index.php?/topic/82-montanes-by-garward-occre/page-33.
-
-
-
-
Garward got a reaction from tkay11 in TABLE SAW
In the course of Montanes construction for production of details I used available for me jig saw (table saw) - self-made "minifactory" for thin laths and an interline interval, FET PROXXON for thickness to 20 mm and MJ10200J Feida for thickness to 40 mm). I have come to a conclusion about necessity of construction jig saw, deprived, whenever possible, lacks of the listed units (the design features sometimes essentially complicating operation; time and the efforts spent for maintenance of accuracy of a cutting; the big noise etc.). In particular, at FET saw a disk – tightening the screw constantly so gets jammed the extremely unsuccessful knot of fastening that I already two times had to cut off its head, differently a disk was not to remove (the same lack marked also others modellers).
Initial ideas of construction were:
- The basic range of a cutting – wood in the thickness from 0,5 to 20 mm;
- Accuracy of a cutting 0,1мм;
- A cutting under various corners;
- Table adjustment on height;
- Reliable knot of fastening a cutting disk and simplicity of its replacement;
- The stock of capacity excluding (reducing) overheat of the engine at long work;
- Noise reduction.
As a result of viewing and the analysis of a considerable quantity of descriptions industrial and self-made jig saw at me the design shown on a photo has turned out http://modelshipworld.com/index.php?/topic/82-montanes-by-garward-occre/page-33.
-
Garward got a reaction from cristikc in San Francisco by Juan Muñoz Carrasco - FINISHED - Spanish galleon
Hi, Juan, I welcome you on MSW 2.0 !
-
-
Garward got a reaction from Salty Sea Dog in MONTANES by Garward - OcCre
Continuation
Intermediate assembly of a foremast
-
Garward got a reaction from mtaylor in Corsair by Garward - FINISHED - OcCre
Continuation
Corsair in a house interior
-
-
Garward got a reaction from GrandpaPhil in San Francisco 2 by Garward - FINISHED - Artesania Latina
San Francisco II went to swimming to far islands (improvisation of my colleague of Raul http://www.goldenhind.ru/art_006.htm)
-
Garward got a reaction from BenD in 24-pdr bronze gun by Garward - FINISHED - 1:24 - from Ancre Le Fleuron 1729 plans
Continuation
-
Garward got a reaction from sokrates in San Francisco 2 by Garward - FINISHED - Artesania Latina
San Francisco II went to swimming to far islands (improvisation of my colleague of Raul http://www.goldenhind.ru/art_006.htm)
-
-
Garward got a reaction from mtaylor in 24-pdr bronze gun by Garward - FINISHED - 1:24 - from Ancre Le Fleuron 1729 plans
The gunner Garward is ready to firing (author of composition my colleague Raul http://www.goldenhind.ru/)
-
Garward got a reaction from fish in San Francisco 2 by Garward - FINISHED - Artesania Latina
San Francisco II went to swimming to far islands (improvisation of my colleague of Raul http://www.goldenhind.ru/art_006.htm)
Our Emblem ®
