Jump to content
Welcome to our new sponsor - Portland Scale Ship Co.! Specializing in Scale model ship kits and building chapters for the HMS Winchelsea and other ships ×

Ian_Grant

Members
 View Profile  See their activity

  • Posts

    2,156

  • Joined

  • Last visited

 Content Type 

Everything posted by Ian_Grant

  1. Ian_Grant
    This article happened to come out today. Our GP is herself nearing retirement just as we enter our elder years. 😒 Have your politicians read this ..... https://nationalpost.com/health/canada-family-doctor-shortage
  2. Ian_Grant
    Michael, as you know I have this in my stash and know how tiny it is. Otherwise I might assume from the above pics that it is a 1/100 scale model. Looks fantastic! I noticed that the actual molds have fewer decorations at the bow than the box art; will you be casting more to add?
  3. Ian_Grant
    Grass is always greener across the fence. Our drugs are cheaper though.
  4. Ian_Grant
    Thank you Bill. It was a nice birthday as we were in Bonaire last week with lots of very nice seafood places. Had barracuda for the first time - it is delicious! Canada has "lifelong" publicly-funded i.e. socialist medical coverage although for years now they have been overwhelmed by aging population and wait times for common surgeries are very long; getting an MRI or even a referral appointment to a specialist can take months and months or even over a year. People go the States or even overseas now to bypass the wait at their own expense. Yet the gov't broadly refuses to allow "private" medical clinics; did you know your American system is held up as the "bogeyman" in Canada, a system Canada just cannot and must not emulate? Even if we cannot get the services as it is. On the plus side I now qualify for the "senior discount" at stores. 😊
  5. Ian_Grant
    Yes, but I have the galley and Preussen to finish first, and I'm also itching do to an RC square rigger at least ship-rigged but maybe even a four-poster barque like Neville Wade does. This despite just turning 65 last week....do I have the time before fingers and eyesight fail? I've been bitten by the RC bug again after decades away.
  6. Ian_Grant
    If I ever build my SR the waterline will touch the wale if I keep the whole hull "dry" on a stand, but this oddly-shaped hull begs for a sea display like you plan Bill in which case I agree with Henry and Mark.
  7. Ian_Grant
    Wow those windows are gorgeous!
  8. Ian_Grant
    Bill, I think your waterline's too low. Just IMHO.
  9. Ian_Grant
    Fantastic display again, Glen! Each build more amazing than the last .... you've inspired me to definitely do an on-water presentation for my next static build.
  10. Ian_Grant
    I went to the library to pick up a book on hold (one of Ian Ross's excellent "Twilight of Empire" series) and took a memory stick with the 3D file for stern medallions, in the event that the printers were available. They were so I whipped off the pair (33 minutes, 70 cents). One has a notch for the stern flagstaff to pass through, enabling the crew to lower the staff if required. Here they are with some primer on them. I had to use black PLA this time. And here in place: I've been applying primer to the ship too. Some parts are at two coats, some at one, all around the lower ports at zero. I can now see it's going to be quite a chore to mask and paint it all. Amazing how a little paint highlights the flaws. Some filling and sanding will be needed. Tomorrow we're off (at 4am 😭) to fly to Bonaire for a week of snorkelling/scuba/hiking. The boat will await my return.
  11. Ian_Grant
    "des res" ??
  12. Ian_Grant
    Nice! I have a 6" Newtonian as well, though not on a motorized mount which you need for photography. It delivers spectacular views of the moon, best viewed when it is partial and cratering is picked out by low-angle sunlight. But with a 6" you can also view Jupiter and four of its moons. I can make out that Jupiter is striped, but it's all "orangish-y" as the eye cannot integrate enough light to see different hues. Looking through an 8" Newtonian the striping is better defined and those four moons become very small orbs as opposed to points of light. Aperture envy is a thing. It's fun to view on successive evenings and see the moons move. When I first bought the scope, I wondered why the 6" protective "lid" had a smaller capped opening; it was only after an eye-watering session of moon viewing that I realized that one leaves the lid in place and removes the small cap to look at the moon with smaller aperture thus reduced light intensity. 😬
  13. Ian_Grant
    If you rent a car in Whitehorse now and propose to take it on the Dempster Highway, there is an extra charge. Presumably the highway is much better now than in 1978 but they say you **will** have a stone hit your windshield. In fact, when we did the pre-rental walk-around I pointed out a crack in the windshield; the guy just shrugged and said every car here has a cracked windshield LOL. Our neighbour drove across the country to the Yukon last summer, went along the Dempster, and sure enough a stone came from nowhere and cracked his Tacoma's windshield.
  14. Ian_Grant
    Wish I'd thought of that!
  15. Ian_Grant
    Mike, .... -38C !!!!!! It just occurred to me to check back here since I hadn't had any notifications....turns out I had forgotten to "follow" my own thread. Wow those drawings are highly detailed!! Right down to hole locations in decks for cabin sink drains, and size/measured location for the china cabinet ... 🙃 There doesn't seem to be a drawing of the china cabinet itself, though. 😏 An incredible resource for potential Klondike modellers. Thank you so much for obtaining all these drawing sheets! I will email Richard and Terry to thank them too. Wonder who will be the first to start a build? My money is on John Ruy ....
  16. Ian_Grant
    Steven, I'm constantly amazed at all these pictures you dig up .... impressive research.
  17. Ian_Grant
    Concur. I gradually poured the resin and stirred the shot around, my theory being that if a solid gelled mass was formed between the frames it would take some of the stress off the thin skin.
  18. Ian_Grant
    I decided to CA the decorative bits on before painting, so the glue can get a "bite" on the sanded epoxy resin hull instead of a paint surface. It will however be quite tedious to paint these details later. On the other hand if I had pre-painted them the paint probably would have cracked off as I bent the brass to follow the required contours. At the bow: At the stern: In other news, the Roman navy recruiters sent a new crew member over to help Marcus guard the ship while in the builder's yard. What a lookout team! I really must give Marcus back his javelin (pilum).
  19. Ian_Grant
    I bought lead shot and poured into the bilge compartments formed by the framing, afterwards sealing with epoxy resin.
  20. Ian_Grant
    Yes, I thought of using brass too but I don't have much experience in soldering multi-part assemblies.
  21. Ian_Grant
    Richard, this tabernacle is very interesting ... I've been wondering what to put on my galley's deck to hold the mast and allow it to be pivoted down. I have watched the "Nave Roman" video many times but other than something big and dark holding the mast no details can be made out. So they tilt the mast up, its square foot settles into the recess, then they lash it higher up on the tabernacle?
  22. Ian_Grant
    Build commenced: Oct 2022 Build completed: Jan 2024 Duration: 15 months Bill, you have to have set a record for this ship model build! She looks wonderful ... I love the sails partly brailed up ... excellent work. You are now a master. Congrats! What's next? A Roman galley perhaps? 😏
  23. Ian_Grant
    Pardon my ignorance .... what is a hunting port? For a stern chase? Helping with fishing the anchor?
  24. Ian_Grant
    As we know, Glen never throws anything away either....how many of us also have short sections of railway track lying around "in case"?
  25. Ian_Grant
    The same problem as in an airplane bathroom? 😁

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...