RussR
-
Posts
231 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by RussR
-
Proxxon Bench Circular Saw KS115
RussR replied to RussR's topic in Modeling tools and Workshop Equipment
There is a good thread here on Model Ship World titled " Can i live without a BYRNES TABLE SAW". -
Proxxon Bench Circular Saw KS115
RussR replied to RussR's topic in Modeling tools and Workshop Equipment
This would be great it one had unlimited space and unlimited funds. For me a KS115 is a big upgrade from a miter box and a hobby saw. Thanks for the comment. RussR -
Proxxon Bench Circular Saw KS115
RussR replied to RussR's topic in Modeling tools and Workshop Equipment
druxey, This would probably solve the problem. With shipping and all, this would cost 150% of what I paid for the saw. At this point I think I can live with 0.5mm tolarance. Thanks for your input. It is much appreciated. RussR -
Proxxon Bench Circular Saw KS115
RussR replied to RussR's topic in Modeling tools and Workshop Equipment
Brian, You are "probablyright". Dressing the screw to a point would screw it up for good. I just now checked to see if there was any debris on any of the surface you mentioned. There was none. The variance isn't consistent. I did clean the fence and table with no effect. But I did notice pits where the screw made contact with the table. So I used a sanding block and to smooth out the pits. Now the variance is about 0.5mm across the full length of the fence. I guess for a $50.00 saw, what can one expect. Thanks for putting me on the right track. RussR -
I bought a used Proxxon Bench Circular Saw KS115, and it works great. But there is one problem with it. When I try to set the fence it tries to cant in at an angle to the blade. My thinking is, if the adjustment screw was ground to a center this wouldn't happen. But the way it is made that can't happen. The only way I can think of to fix this is to buy a machine screw and and cut the head off and chuck it up in a drill motor or better yet a lath and dress the end up. Then make a knob for it. Can anyone think of a better solution? Photo the the type saw:
-
Mm Messis, I am enjoying your build log. I have read that some modelers use hairspray and a fan to get the effect of wind in there sails. I don't have experience with it myself but it sounded good. RussR
-
MESSI, I would love to see your more of your vacation photos of the ship Hermione. RussR
-
Hello Christos, I have also ordered this model with the crew figures. Would you send me the paint colors you wrote about here in your log? I tried to send you a message here in MSW but your box must be full and can't except anymore. PS: I hope my ship turns out a well as yours RussR
-
QUICK-FIND INDEXES to BUILD LOGS FOR KITS
RussR replied to Dan Vadas's topic in - Index of all kits by brand and subject
It is interesting to note the number of starts to the number of finishes. Starts Finishes Wooden Ships 1673 308 Small Craft 235 107 Plastic/Resin 172 34 XSect/Guns/Dior 52 14 Ships in Bottles 23 12 RadioControled 20 4 Restorations 14 4 Looks like there is a lot still being built or given up on. -
I know what you mean, I am surprised that I get away with what I do. "Boys need there toys". My vote is "not covered. That is a lot of work to be covered forever.
-
That shouldn't be a problem, just do two of them. One covered and one not covered.
-
Thanks WackoWolf, My order is in for some real drill bits. I am tired of buying what just looks like drill bits.
-
How To Make Mini Cutting Machine Cut Popsicle Sticks
RussR replied to RussR's topic in Modeling tools and Workshop Equipment
Thanks, Gregory and Lou, for those great ideas. What was suggested so far I think is doable. I think that the author of the video's intent was what he built with only what was handy. Kind of like a "MaGyver Project". Russ -
How To Make Mini Cutting Machine Cut Popsicle Sticks
RussR replied to RussR's topic in Modeling tools and Workshop Equipment
Gregory, Thanks for the info. So it would cost about $20.00 plus some styren or wood and a couple of connectors and a switch. One might even run it on eight D-cells if you didn't plan on using it much. -
How To Make Mini Cutting Machine Cut Popsicle Sticks
RussR replied to RussR's topic in Modeling tools and Workshop Equipment
Sorry I don't. I just saw the video and though it may be of interest to others. May be someone else here would have some suggestions. RussR -
Not long ago I ask how to cut a piece of 30mm X 4mm X 4mm into four equal parts and received many great ideas. Just now I found a video on YouTube "How To Make Mini Cutting Machine Cut Popsicle Sticks". I haven't made one but I admire the creative thoughts of some people. I have downloaded this and hopefully I can upload it here. RussR How To Make Mini Cutting Machine Cut Popsicle Sticks.webm
-
I appreciate all you guys input on my little problem. All of your ideas are well taken and filed away in my mental bank for future recall. What I had done was I found a piece of 3/16" square junk wood and cut it to 7mm length and sanded two edges to 4mm. I just painted them. Since they are so small I think it will look like it was planed. At this point in my skill level I bought an AL model of the 1805 Pilot Boat for $35.00 on eBay to practice on. My skills are far from perfect at this point. It is doubtful if I will even display it. I am learning a lot. But it gives my pea brain something to do. Like they sayl "you learn by doing". Thanks again. RussR
-
Dave, that is a good idea. I only wish we had a local model shop. The closest thing we have to a model shop is Hobby Lobby or one that is about 60 miles away. And they sell mostly plastic. I'll have to make do with what is available. Thanks for the reply RussR
-
That was my though, but I have to think about cutting the last piece into two. I would have to be able to hold a very tiny piece and cut it. At this point I am thinking I would be better off to just buying some 4mm X 4mm basswood stock at Hobby Lobby and cut it with my 2" cut off power saw. The trade off is I would need to either paint them or stain them. My complaint with kit manufacturers is they don't put dimensions on there drawings. And they don't consider how the builder is to do what is required for a good out come. I am looking forward to the day that I reach a point to start scratch building from plans. Thanks again for the reply.
-
Jan, Thanks for the reply No. It is to be cut into roughly 7mm lengths. Sorry that I wasn't clear bout that.
-
The model that I am working on requires that I cut a piece of 30mm X 4mm X 4mm walnut into 4 equal pieces. I considered using my exacto hobby saw. It is probably to thick for side cutters. It is probably to small for a 2" power cut off saw. What do you old "Salts" recommend? RussR
-
This may be old news for some, but I just found these two videos on YouTube that was very interesting to me. The site won't let me post the link. You will have to do a search on youtube. "Flagship Endeavour Ship - The Launch / HM Bark Endeavour Replica / 9 December 1993 HD" And the other one is "HM Bark ENDEAVOUR, 1999, 18th century sail training". RussR
-
I finished a 18th century longboat for my 1st build and learn a lot. I think a 1st scratch build would be the same 18th century longboat but in a larger scale.
-
Okay, I own the Dremel 3000 and the drill press adapter and it works good enough for model building etc. Also I own the router attachment but haven't used it so at this point I don't have a opinion. But for a hobby tool how good does it have to be? For a tool to make my living I want the best quality.
-
I own one with the 4486 keyless chuck and don't have any complaints. But it isn't set up all the time. For a grab and go tool I just use a cheap $9.95 tool that I bought at Harbor Freight. I am just curios, why do people buy something and then ask for opinions later. Shouldn't it be the other way around? I don't like to tell someone they screwed up.
Our Emblem ®
