-
Posts
1,730 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by flying_dutchman2
-
Instead of bending extreme curves in the bow and stern with the first planking, I ended up stacking the planks side by side going up following the curve of the bulkheads. Then cutting and sanding away excess planks to form the extreme curve of the bow and stern. I will apply the extremely curves for both stern and bow with the second layer of planking The back of the stern is curved upwards and inwards. Once the clamps are removed it will give a better understanding of the whole area. The bow planks are curved and with every layer going up the curve is shortened by one thickness of a plank giving it a 'step look'. Both areas are built 'shell first' and frame timbers ars added to hold the planks in place. This is a classic example of how the Dutch build there ships in the 17th century. I am practicing on this boat as in the future I want to built a ship in this way....... Shell first. Marcus
-
Looking good, Kees, the brass work is gorgeous. I also like the figures you will be adding. Makes the boat come alive. Marcus
- 193 replies
-
- wilhelmina vii
- fishing
-
(and 1 more)
Tagged with:
-
I agree with Popeye, the weathering looks great, especially the way you did the rust lines. Marcus
- 292 replies
-
- g class destroyer
- trumpeter
-
(and 4 more)
Tagged with:
-
Started the first layer of planking. I soak the basswood in water overnight so I can bend it at any curve. So far it is easy but it will become challenging. As Cog would say, it is a 'forest of clamps'. Marcus
-
Working a little bit here and there on the Boyer and the mill. When it is sunny outside, I work in the garden (food and flowers). Late fall, winter and early spring is when I work on the boat, but when the weather is good, I am outside. I am creating a template that fits on top of the bow.. When I start planking the top of the bow the planks will go inwards (if that is the correct explanation). The planks go inward and I need to follow the curve of the bow. Marcus
-
Painted all surfaces of the mill with primer for exterior. Next is to go to hobby lobby to get some more van Dyk green to touch up the windows and doors and purchase another green, either lighter or darker for the clinker panels. Purchase a quart of gray to imitate the thatch. I will use yellow ochre here and there to get som contrast. Use my neighbors drill press for the axle holes. Install that in the cap. Close the cap and put a layer of tile glue on it. Paint that and once that is all done start on the most difficult part of the mill, the vanes. Marcus
-
After much sanding, fitting, sanding and more fitting, dry fitting the keel, stem and stem post was satisfactory. Glued all pieces in place. Once dry some more sanding and starting on the first layer of planking with basswood. I have a feeling this part is going to be an exercise in patience with many broken strips as both bow and stern have some extreme curves. It will be fun Marcus
-
# Jan and Wefalck, thank you both for the information and others for the likes. Finished the final sanding of the Boyer. Measured the height of the deck and the railing. Next, I have to remove some wood that is part of the frames, the top of it otherwise the deck is too high Marcus
-
I can always depend on you for an answer, Wefalck, thank you. Related is the keyword. There are similarities comparing the bow of both of them. Marcus
-
Finished all the clinker panels and nailed them to the mill. Calked in between the panals, on the corners with a combo of glue mixed with saw dust. Found someone with a drill press so I can do the axle head. The cap is pretty much covered with veneer. It will get a layer of tile glue and a coating of paint. Marcus
-
As an early birthday present I received a book by Ab Hoving called 'Nicholaes Witsen and Shipbuilding in the Dutch Golden Age' (review will follow). Very detailed, technical and interesting. Also an appendix of definitions of parts of the ship and in between parentheses the Dutch definition. Ex. Orlop deck is called a koebrug, which literally means 'cow bridge'😁. Then in the back of the book, Witsen describes what every sailor on the Pinas gets to eat and qualities as well. For me that is an eye opener. Anyway, in the introduction it has a sentence with the ship called Boyer, and right behind in parentheses it says 'Boeier'. Does this mean that they are the same? I looked up both ships and they are different. But Hoving knows what he is talking about. I also know that the Boyer changed over the years in the amount of sails but the shape of the hull stayed pretty much the same. Does anyone have a suggestion? Marcus
-
Jan, In the third picture you see the rounded triangle on the left. That piece is open as the tiller goes through. But on another picture I have it is somewhat closed and has a small motive painted on it. So this part I have to decide what to do. The rounded Stern is a piece of balsa I am shaping to fit. It will be unique. Marcus
-
It's nice to see that there are still kits/models available from 'Authentic Models', as that company went out off business a long time ago. They used to have a store in the Bloemstraat, Amsterdam. That was a really great store. Lots of finished models, accessories, carvings and lots of kits. Still have one of their last catalogs. I have to start perusing eBay more often. Marcus
-
Installed 2 clinker panels on the mill. The holes for the galvanized small nails are pre-drilled. No glue was used. The corners of the wall were the edges of the panels are will get a square dowel, which will be tapered at the top. It is a solution. Because some walls are off be a mm or 2, I can't install the edges of the panels together. Marcus
-
Been working on the hull, final sanding. The transom is curved and ends in a point. The top wale, there are 3 on each side, is part of the point. There is a small triangular picture of something. I have to make something up as the few pictures I have of the boat make no sense to me. The bow has a very extreme curve which is going to be fun when bending the planks. I did have some practice with 2 yachts. I cut out a copy of the deck and fitted on the ship. Looks very interesting, very different as well. Marcus
-
Piet and Wefalck, thank you both. I will look into this book you mentioned. Sounds interesting. Marcus
-
Finished painting the storage cabin. The bottom part is not clinkered because it goes below the deck. Marcus
-
Put the roof on the storage cabin, added the door and a handle. All that is left is a small roof over the door and the book shows that the door is red, so it will be painted cadmium dark red. Finished final sanding of the hull and next time I will fit the front of the bow (bread and butter piece). Add wood filler were needed. Also figure out the stern which ends in a point. Marcus
-
Piet, Thank you very much for the detailed information on how to make water. Going to copy it in my general hobby notebook. Marcus
- 378 replies
-
- java
- pacific crossroads
-
(and 2 more)
Tagged with:
-
Couldn't work on the mill as it rained all day. What I need to do is outside work. So worked on the bow I used the bread and butter method to get a rough form. Also worked on some deck items such as the storage cabin. The walls are clinker built as the picture in the book shows it that way. All that is left is the door and the roof. Created the main hatch and what is left is the hinges and the rings. Marcus
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.