Jump to content
Supplies of the Ship Modeler's Handbook are running out. Get your copy NOW before they are gone! Click on photo to order. ×

Ondras71

Members
 View Profile  See their activity

  • Posts

    429

  • Joined

  • Last visited

Reputation Activity

  1. Like
    firdajan
    Ondras71 got a reaction from firdajan in Roter Löwe 1597 by Ondras71   
    Mast parts done. Topmasts supplemented with pulleys..


    Making basket supports called Mast Cheeks. Again processing the glued and then soaked parts..





    I have already reached model height..💥



     
  2. Like
    marsalv
    Ondras71 got a reaction from marsalv in Roter Löwe 1597 by Ondras71   
    Mast parts done. Topmasts supplemented with pulleys..


    Making basket supports called Mast Cheeks. Again processing the glued and then soaked parts..





    I have already reached model height..💥



     
  3. Like
    CiscoH
    Ondras71 got a reaction from CiscoH in Roter Löwe 1597 by Ondras71   
    I finished the swivel cannons on the railing.💥
     
    I created new smaller chambers..


    After blackening..

    The last visible detail, the chamber pins..

    The last parts of the hull, chamber guns, placed..
     






    And now I can rush to the rigging!!🔥
  4. Like
    baskerbosse
    Ondras71 got a reaction from baskerbosse in Roter Löwe 1597 by Ondras71   
    The boat is ready, just the rudder and place it on the ship...🔥







    The 1:60 scale is still demanding on details..

  5. Like
    uscharin
    Ondras71 got a reaction from uscharin in Roter Löwe 1597 by Ondras71   
    Another milestone behind me, the body of the boat finished, sanded and cut from the hoof with a razor saw..🔥💥


    Again I used the option of dispersion glue. The sunken place on the bow after removal is wetted and pushed from the inside into the correct place..



    A preview of the boat on the ship's deck..😍





    Now clean the ribs and arrange.🔥
  6. Thanks!
    Ondras71
    Ondras71 reacted to marsalv in L'Amarante by marsalv - 1:36 - POF   
    To allanyed: Material used for this part is boxwood. The part is made using a cnc milling machine, which enables precise milling from both sides. The procedure can be seen in the photos in post 8.
    I continue with the construction of the wing transom.
         










  7. Like
    Ondras71
    Ondras71 reacted to Baker in Mary Rose by Baker - scale 1/50 - "Your Noblest Shippe"   
    With the port side also ready, the standards are made to height. A simple way to measure, is to use a wooden plank as a template.

     
    A mold for the semi-circular gun ports. This is slightly conical, so up to the arrow and no further, otherwise the hole is too big.

    Ready.

    This is how far we have come, next is the last piece of planking on the bow.

    Thanks for following
  8. Wow!
    Ondras71
    Ondras71 reacted to Forlani daniel in Chebece 1750 by Forlani daniel - FINISHED - 1:48   
    Good morning everyone, these are the last photos I am putting up of the Requin, I have finished this beautiful model that has occupied me for almost 6 years. I wanted to thank all of you who have intervened in my construction site over time, thank you very much and see you for the start of a new model.











  9. Like
    Ondras71
    Ondras71 reacted to Baker in Mary Rose by Baker - scale 1/50 - "Your Noblest Shippe"   
    First.
    Thanks everyone for watching, liking and comments.
     
    Building the upper part of the hull at the waist. We change from fraims on the inside of the planking to standards on the outside. Planking is quite thin here, only about 4cm 1/1 scale.
    First the stadards, luckily some of these remained. And my standards were created based on them. One by one, time consuming

    Glue the standards in place after dry fitting

    Then the planking on the rear castle is neatly cut.

    The first plank


    The second plank, all hands (clamps) on deck.


    Additional supports around the gun ports.

    Glued the middle rail in place

    And the top rail.


    The starboard side is ready, the tops of the rails still need to be shortened slightly. 
    I'm happy with the look of this part, if I say so myself 

  10. Like
    petervisser
    Ondras71 got a reaction from petervisser in Roter Löwe 1597 by Ondras71   
    I modified my lathe to clamp long sections of masts..🔥


    Production of topmasts has started..
     







    Add some details and I can start assembling..💥

     
     
  11. Wow!
    Ondras71
    Ondras71 reacted to marsalv in L'Amarante by marsalv - 1:36 - POF   
    Filling transoms.













  12. Like
    FriedClams
    Ondras71 got a reaction from FriedClams in Roter Löwe 1597 by Ondras71   
    I modified my lathe to clamp long sections of masts..🔥


    Production of topmasts has started..
     







    Add some details and I can start assembling..💥

     
     
  13. Like
    davyboy
    Ondras71 got a reaction from davyboy in Roter Löwe 1597 by Ondras71   
    I modified my lathe to clamp long sections of masts..🔥


    Production of topmasts has started..
     







    Add some details and I can start assembling..💥

     
     
  14. Like
    marsalv
    Ondras71 got a reaction from marsalv in Roter Löwe 1597 by Ondras71   
    I modified my lathe to clamp long sections of masts..🔥


    Production of topmasts has started..
     







    Add some details and I can start assembling..💥

     
     
  15. Like
    marsalv
    Ondras71 got a reaction from marsalv in Roter Löwe 1597 by Ondras71   
    Thank you very much friends, I am trying my best..😁
     
    Finally the main lower parts of the masts..🔥
     


    Temporary direction signs created for exact machining directions..
     

    The tops are machined and holes drilled for the location of the lower tie-down points..
     


    Finished lower parts of the masts..
     


    (Manual dividing device)

    Done..💥


    Now tops and topmasts..🔥
  16. Thanks!
    kirill4
    Ondras71 got a reaction from kirill4 in Roter Löwe 1597 by Ondras71   
    I finished the swivel cannons on the railing.💥
     
    I created new smaller chambers..


    After blackening..

    The last visible detail, the chamber pins..

    The last parts of the hull, chamber guns, placed..
     






    And now I can rush to the rigging!!🔥
  17. Like
    marsalv
    Ondras71 got a reaction from marsalv in Roter Löwe 1597 by Ondras71   
    Thank you very much friends. thank you for the like.
     
    I'm continuing with the rotating chamber cannons on the railing, luckily there will only be four.
    I found the current cannon in a book by Ab Hoving: Het Schip Van Wilem Barents and painted it.

    Then the turning began. It is very small against already created cannons.

    Created pockets for exchange chambers.

    Of course, you need to start making a larger number, they slowly decrease during the work..


    Added chambers..


    Result OK..


     
  18. Like
    Siggi52
    Ondras71 got a reaction from Siggi52 in Roter Löwe 1597 by Ondras71   
    I modified my lathe to clamp long sections of masts..🔥


    Production of topmasts has started..
     







    Add some details and I can start assembling..💥

     
     
  19. Like
    Baker
    Ondras71 got a reaction from Baker in Roter Löwe 1597 by Ondras71   
    I modified my lathe to clamp long sections of masts..🔥


    Production of topmasts has started..
     







    Add some details and I can start assembling..💥

     
     
  20. Like
    GrandpaPhil
    Ondras71 got a reaction from GrandpaPhil in Roter Löwe 1597 by Ondras71   
    I modified my lathe to clamp long sections of masts..🔥


    Production of topmasts has started..
     







    Add some details and I can start assembling..💥

     
     
  21. Like
    Archi
    Ondras71 got a reaction from Archi in Roter Löwe 1597 by Ondras71   
    I modified my lathe to clamp long sections of masts..🔥


    Production of topmasts has started..
     







    Add some details and I can start assembling..💥

     
     
  22. Like
    mtaylor
    Ondras71 got a reaction from mtaylor in Roter Löwe 1597 by Ondras71   
    I modified my lathe to clamp long sections of masts..🔥


    Production of topmasts has started..
     







    Add some details and I can start assembling..💥

     
     
  23. Wow!
    Javelin
    Ondras71 got a reaction from Javelin in Roter Löwe 1597 by Ondras71   
    Thank you very much friends, I am trying my best..😁
     
    Finally the main lower parts of the masts..🔥
     


    Temporary direction signs created for exact machining directions..
     

    The tops are machined and holes drilled for the location of the lower tie-down points..
     


    Finished lower parts of the masts..
     


    (Manual dividing device)

    Done..💥


    Now tops and topmasts..🔥
  24. Wow!
    Javelin
    Ondras71 got a reaction from Javelin in Roter Löwe 1597 by Ondras71   
    Thank you very much friends. thank you for the like.
     
    I'm continuing with the rotating chamber cannons on the railing, luckily there will only be four.
    I found the current cannon in a book by Ab Hoving: Het Schip Van Wilem Barents and painted it.

    Then the turning began. It is very small against already created cannons.

    Created pockets for exchange chambers.

    Of course, you need to start making a larger number, they slowly decrease during the work..


    Added chambers..


    Result OK..


     
  25. Like
    westwood
    Ondras71 got a reaction from westwood in Roter Löwe 1597 by Ondras71   
    I modified my lathe to clamp long sections of masts..🔥


    Production of topmasts has started..
     







    Add some details and I can start assembling..💥

     
     

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...