ERS Rich
-
Posts
673 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by ERS Rich
-
Thanks for mentioning this, given how long it takes to build a ship model, one wonders how much time is taken up with “invisible” things such this, or other trivial details pursued for the sake of “realism”, especially by newcomers. Time which could be spent completing the project and gaining satisfaction from that. -
Enjoying this, thanks for posting.
-
A couple of thoughts, Have used AV paint, with a Paasche Talon, for the last few years and happy with the results. Have never tried adding gloss medium to paint, rather I use the Vallejo gloss resin. Have found the gloss finish can be built up with thin coats. Tamiya Flat black may be worth a try. Good luck with it…..
-
Endeavour by Bill97 - OcCre - 1/54
ERS Rich replied to Bill97's topic in - Kit build logs for subjects built from 1751 - 1800
Mucho important. The instructions probably do not emphasize that planks must be tapered. If needed look it up here, along with the concept of planking belts. An understanding of planking is probably the biggest thing one needs to learn when getting started. See my Constitution log, link below for pointers. Have also found if you are on a certain step, it helps to look ahead in the instructions for addition images related to that step. Good luck with your project! -
Strictly speaking best to prime metal, however I don’t always…..
-
Hello from Perth, Ontario - On to Victory!
ERS Rich replied to Malcolm Brown's topic in New member Introductions
Welcome to model ship world and good luck with your Victory!- 31 replies
-
- 3
-
-
- Victory 1:100
- Heller
- (and 1 more)
-
May copper the hull, maybe, cost makes me think twice. Have Caldercraft Snake, came with the plates, probably build that first…..
-
Yes Avi, I can’t remember exactly how I prepped the metal before painting. Just tool a look for my painting notebook and can’t find it. My rudder is static. I did paint the hull with Tamiya Dark Copper acrylic, and my build log says the wood was prepped with Varethsne Ipswich pine stain. I like priming with stain, as it seals the wood fibers but doesn’t completely fill the grain. It takes acrylic well and leaves the wood grain, so the surface doesn’t appear plastic. I’m thinking about picking up the Constitution this fall. Working on two other square rig hulls at the moment, the thought is masting and rigging all three simultaneously. I’ve also been experimenting with Mr Metal primer. Brush applied as I don’t want to deal with the spray fumes. It takes acrylic well.
-
My two cents….have found CA on bullkheads does not immediately set, and have to do a second application after the first sort of dries, the first application is probably filling in the end grain. Also, at the bulkhead, CA will easily bond the long grain along the edge of the new plank to the edge of the previous plank. My method is generous Titebond on the plank edge, CA on the bulkheads, install the plank, hold with fingers at the bulkeads, reapply CA if necessary when a plank does not hold at the bulkhead. Then clamp the installed plank along the edge up against the previous plank. Have a rag ready to deal with the squeeze out or scrape after the Titebond sets. The CA provides initial hold, the Titebond provides the ultimate strength. It may be helpful to watch Youtube for cabinetmakers glueing up panels to learn about glue, and dealing with squeeze out. My Constitution build log may be helpful. Good luck.
-
Yes, seems like file down the “triangle” to a round pin, looks to me that the triangle was formed by a bit of flash from the casting process…..
-
Welcome and greetings from Massachusetts, USA. Good luck with your project. Have fun!
-
Welcome to Model Ship World!!
-
Welcome and greetings from USA. Good luck with your work. -Rich
-
Sort of circling back to the question. I’ll seal with one of these products. Given the coarse grain, leaning towards the Gesso, thinned down and, shot with the Iwata RG-3 mini sprayer. It’s slightly gap filling as well. This Hermione is an old AL kit about 10 or more years old….goal is to practice and improve techniques - get a visually convincing result - a model of the ship, rather than an exact reproduction. Cheers
-
Yes, they are full size files, about 9” long. The hull is the Hermione Lafayette, about 20” long. To clarify stroke the file along the plank at about 45 degrees or so - a shear cut. Light pressure, let the tool do the work - cut the wood, don’t gouge it. With practice you can get control to the point where you can remove small amounts of wood. Control is the difference between a file and sandpaper. The right tool changes this job from a pain to a joy. Practice on poplar or another hardwood. Home improvement stores sell project boards in hardwood. Or go for it on this hull, if it goes wrong strip and redo the planking as others suggest. Good luck
-
Hi, I don’t think all is lost here….. Use toothpicks and fill in the gaps with Titebond. Recommend avoiding covering large areas of the hull with filler, it’s a waste of time removing it, when just the gaps need it. Think of the glue as oakum. It’s good the planks appear to be thick. Sandpaper can be difficult as is it will slowly round over the plank tops - see the bow. I use files, flat and half round to work the hull. Go 90 degrees along the plank to quickly remove wood. Go lightly until you get the hang of. With practice you will get great control, quickly removing wood. Move the file parallel, edge along the planks,for finer control. As Allenyed mentions scrapers work too…. Sandpaper is a drag, and not appropriate, when a lot of wood needs to be removed. It can seem like after a lot of sanding nothing is happening and the planks have humps. Here are a couple of pictures of a hull in progress demonstrating what’s possible. Hang in there and good luck with it! -Rich The lower planks are before working, upper have been worked…. Upper planks mostly done, lower planks need some work…. The files…..
-
Any US nuclear powered CGN….. Thanks
-
Greetings from Massachusetts, USA. Good luck with your woodworking journey! Cheers!
-
Had to redo these filler blocks a couple of times. Rasp for initial shaping, moving it fore and aft along the center of the piece to get the sweep up towards the counter. Then a half round file. And constantly using the templates and redrawing pencil lines as material is removed.
-
Thanks, I ran out of steam after thinking about the size after the masting and rigging, the case, and wondering where to put it in my house. I’ll probably restart this project mid summer or fall, after I finish Hermione Lafayette and HMS Badger - which will give me square rig experience. Cheers
-
A beauty!
-
Hi, My build log, link below, covers building the hull with Bob Hunt’s practicum. Good luck. -Rich
-
Hello and welcome! Have fun with the cross section. Cheers
Our Emblem ®
