Jaager

Something to consider for keeping carving tools sharp:
 
Get some pieces of scrap leather from a local shop that works leather.
Coat the smooth side with Flexcut Gold Polishing compd. 
 
It comes as a stick - use like a crayon to coat the leather.
 
 
Strop the edge frequently - pull the blade.
I must sometimes move the blade slightly in the cutting direction when I place it on the leather - I can tell because it messes up the surface of the leather.  Several back up pieces of leather is useful to have.
 
Unless you mar the edge of the tool by hitting steel or something, you should not need to use a sharpening stone ever again.  Stropping should be enough.

Something to consider for keeping carving tools sharp:
 
Get some pieces of scrap leather from a local shop that works leather.
Coat the smooth side with Flexcut Gold Polishing compd. 
 
It comes as a stick - use like a crayon to coat the leather.
 
 
Strop the edge frequently - pull the blade.
I must sometimes move the blade slightly in the cutting direction when I place it on the leather - I can tell because it messes up the surface of the leather.  Several back up pieces of leather is useful to have.
 
Unless you mar the edge of the tool by hitting steel or something, you should not need to use a sharpening stone ever again.  Stropping should be enough.

Something to consider for keeping carving tools sharp:
 
Get some pieces of scrap leather from a local shop that works leather.
Coat the smooth side with Flexcut Gold Polishing compd. 
 
It comes as a stick - use like a crayon to coat the leather.
 
 
Strop the edge frequently - pull the blade.
I must sometimes move the blade slightly in the cutting direction when I place it on the leather - I can tell because it messes up the surface of the leather.  Several back up pieces of leather is useful to have.
 
Unless you mar the edge of the tool by hitting steel or something, you should not need to use a sharpening stone ever again.  Stropping should be enough.

Something to consider for keeping carving tools sharp:
 
Get some pieces of scrap leather from a local shop that works leather.
Coat the smooth side with Flexcut Gold Polishing compd. 
 
It comes as a stick - use like a crayon to coat the leather.
 
 
Strop the edge frequently - pull the blade.
I must sometimes move the blade slightly in the cutting direction when I place it on the leather - I can tell because it messes up the surface of the leather.  Several back up pieces of leather is useful to have.
 
Unless you mar the edge of the tool by hitting steel or something, you should not need to use a sharpening stone ever again.  Stropping should be enough.

Something to consider for keeping carving tools sharp:
 
Get some pieces of scrap leather from a local shop that works leather.
Coat the smooth side with Flexcut Gold Polishing compd. 
 
It comes as a stick - use like a crayon to coat the leather.
 
 
Strop the edge frequently - pull the blade.
I must sometimes move the blade slightly in the cutting direction when I place it on the leather - I can tell because it messes up the surface of the leather.  Several back up pieces of leather is useful to have.
 
Unless you mar the edge of the tool by hitting steel or something, you should not need to use a sharpening stone ever again.  Stropping should be enough.

Something to consider for keeping carving tools sharp:
 
Get some pieces of scrap leather from a local shop that works leather.
Coat the smooth side with Flexcut Gold Polishing compd. 
 
It comes as a stick - use like a crayon to coat the leather.
 
 
Strop the edge frequently - pull the blade.
I must sometimes move the blade slightly in the cutting direction when I place it on the leather - I can tell because it messes up the surface of the leather.  Several back up pieces of leather is useful to have.
 
Unless you mar the edge of the tool by hitting steel or something, you should not need to use a sharpening stone ever again.  Stropping should be enough.

Suggestions:
 
Draw your grid on the white side of a piece of thick poster board.
 
Tape a piece of transparent drafting velum or a less expensive substitute:
Bienfang Designer Grid Paper, 50 Sheets, 8-1/2-Inch by 11-Inch Pad, 8 by 8 Cross Section
( $7.00 at Amazon )  The lines are straight and the grid perpendicular, but the grid is not precise.
 
The center line, keel line and base line transferred ,  but you can leave off the waterlines and buttock lines for each frame - just the frame points are needed.
 
Only plot one side of the frame. 
Scan the half frame into your computer.
Have a transparent metric ruler in the scan.
Open the scan in a drawing program - Photo Shop - ( has a rental online deal - if you are quick, you only need a 1 month rental) / Paint Shop Pro / I use Painter 12 - older versions like Painter 8 work just as well - I just needed 12 to get PNG in/out.
The program needs layers. 
Open the half frame as a layer, duplicate it, flip copy horizontally and position the baseline/ centerline and combine the two layers. You now have a precise mirror of the half frame.
 
Kate Cory would probably be framed French/American style -  paired frames with the space between +/- half the thickness of one of the pair.   I round - I am working on USS Vincennes 1825  R/S is 26"  Given the range of sided dimensions of the frames I chose to make each frame 10" and the space 6".
 
The point ?  You can use the middle frame shape layer for both outlines of the pair.
 
The metric ruler part - scan in - print out - can be altered by the computer-  Matching up the print out of the ruler with the ruler- the % change in document size needed to be done in the drawing program  to get identity in size is easier to calculate using metric an English scale.
 
Another advantage - colored lines are easier to follow when cutting out and shaping the frames.  With a paint program, it is easy to magic wand a line and change its color.
I make the dead flat centerline shape = red - next one = green, the next one = blue, the next = red....
The paint program color picker has a slider for each of the three colors, so they are easy to set - 
255/0/0  then 0/255/0 then 0/0/255.

Suggestions:
 
Draw your grid on the white side of a piece of thick poster board.
 
Tape a piece of transparent drafting velum or a less expensive substitute:
Bienfang Designer Grid Paper, 50 Sheets, 8-1/2-Inch by 11-Inch Pad, 8 by 8 Cross Section
( $7.00 at Amazon )  The lines are straight and the grid perpendicular, but the grid is not precise.
 
The center line, keel line and base line transferred ,  but you can leave off the waterlines and buttock lines for each frame - just the frame points are needed.
 
Only plot one side of the frame. 
Scan the half frame into your computer.
Have a transparent metric ruler in the scan.
Open the scan in a drawing program - Photo Shop - ( has a rental online deal - if you are quick, you only need a 1 month rental) / Paint Shop Pro / I use Painter 12 - older versions like Painter 8 work just as well - I just needed 12 to get PNG in/out.
The program needs layers. 
Open the half frame as a layer, duplicate it, flip copy horizontally and position the baseline/ centerline and combine the two layers. You now have a precise mirror of the half frame.
 
Kate Cory would probably be framed French/American style -  paired frames with the space between +/- half the thickness of one of the pair.   I round - I am working on USS Vincennes 1825  R/S is 26"  Given the range of sided dimensions of the frames I chose to make each frame 10" and the space 6".
 
The point ?  You can use the middle frame shape layer for both outlines of the pair.
 
The metric ruler part - scan in - print out - can be altered by the computer-  Matching up the print out of the ruler with the ruler- the % change in document size needed to be done in the drawing program  to get identity in size is easier to calculate using metric an English scale.
 
Another advantage - colored lines are easier to follow when cutting out and shaping the frames.  With a paint program, it is easy to magic wand a line and change its color.
I make the dead flat centerline shape = red - next one = green, the next one = blue, the next = red....
The paint program color picker has a slider for each of the three colors, so they are easy to set - 
255/0/0  then 0/255/0 then 0/0/255.

Suggestions:
 
Draw your grid on the white side of a piece of thick poster board.
 
Tape a piece of transparent drafting velum or a less expensive substitute:
Bienfang Designer Grid Paper, 50 Sheets, 8-1/2-Inch by 11-Inch Pad, 8 by 8 Cross Section
( $7.00 at Amazon )  The lines are straight and the grid perpendicular, but the grid is not precise.
 
The center line, keel line and base line transferred ,  but you can leave off the waterlines and buttock lines for each frame - just the frame points are needed.
 
Only plot one side of the frame. 
Scan the half frame into your computer.
Have a transparent metric ruler in the scan.
Open the scan in a drawing program - Photo Shop - ( has a rental online deal - if you are quick, you only need a 1 month rental) / Paint Shop Pro / I use Painter 12 - older versions like Painter 8 work just as well - I just needed 12 to get PNG in/out.
The program needs layers. 
Open the half frame as a layer, duplicate it, flip copy horizontally and position the baseline/ centerline and combine the two layers. You now have a precise mirror of the half frame.
 
Kate Cory would probably be framed French/American style -  paired frames with the space between +/- half the thickness of one of the pair.   I round - I am working on USS Vincennes 1825  R/S is 26"  Given the range of sided dimensions of the frames I chose to make each frame 10" and the space 6".
 
The point ?  You can use the middle frame shape layer for both outlines of the pair.
 
The metric ruler part - scan in - print out - can be altered by the computer-  Matching up the print out of the ruler with the ruler- the % change in document size needed to be done in the drawing program  to get identity in size is easier to calculate using metric an English scale.
 
Another advantage - colored lines are easier to follow when cutting out and shaping the frames.  With a paint program, it is easy to magic wand a line and change its color.
I make the dead flat centerline shape = red - next one = green, the next one = blue, the next = red....
The paint program color picker has a slider for each of the three colors, so they are easy to set - 
255/0/0  then 0/255/0 then 0/0/255.

Suggestions:
 
Draw your grid on the white side of a piece of thick poster board.
 
Tape a piece of transparent drafting velum or a less expensive substitute:
Bienfang Designer Grid Paper, 50 Sheets, 8-1/2-Inch by 11-Inch Pad, 8 by 8 Cross Section
( $7.00 at Amazon )  The lines are straight and the grid perpendicular, but the grid is not precise.
 
The center line, keel line and base line transferred ,  but you can leave off the waterlines and buttock lines for each frame - just the frame points are needed.
 
Only plot one side of the frame. 
Scan the half frame into your computer.
Have a transparent metric ruler in the scan.
Open the scan in a drawing program - Photo Shop - ( has a rental online deal - if you are quick, you only need a 1 month rental) / Paint Shop Pro / I use Painter 12 - older versions like Painter 8 work just as well - I just needed 12 to get PNG in/out.
The program needs layers. 
Open the half frame as a layer, duplicate it, flip copy horizontally and position the baseline/ centerline and combine the two layers. You now have a precise mirror of the half frame.
 
Kate Cory would probably be framed French/American style -  paired frames with the space between +/- half the thickness of one of the pair.   I round - I am working on USS Vincennes 1825  R/S is 26"  Given the range of sided dimensions of the frames I chose to make each frame 10" and the space 6".
 
The point ?  You can use the middle frame shape layer for both outlines of the pair.
 
The metric ruler part - scan in - print out - can be altered by the computer-  Matching up the print out of the ruler with the ruler- the % change in document size needed to be done in the drawing program  to get identity in size is easier to calculate using metric an English scale.
 
Another advantage - colored lines are easier to follow when cutting out and shaping the frames.  With a paint program, it is easy to magic wand a line and change its color.
I make the dead flat centerline shape = red - next one = green, the next one = blue, the next = red....
The paint program color picker has a slider for each of the three colors, so they are easy to set - 
255/0/0  then 0/255/0 then 0/0/255.

Suggestions:
 
Draw your grid on the white side of a piece of thick poster board.
 
Tape a piece of transparent drafting velum or a less expensive substitute:
Bienfang Designer Grid Paper, 50 Sheets, 8-1/2-Inch by 11-Inch Pad, 8 by 8 Cross Section
( $7.00 at Amazon )  The lines are straight and the grid perpendicular, but the grid is not precise.
 
The center line, keel line and base line transferred ,  but you can leave off the waterlines and buttock lines for each frame - just the frame points are needed.
 
Only plot one side of the frame. 
Scan the half frame into your computer.
Have a transparent metric ruler in the scan.
Open the scan in a drawing program - Photo Shop - ( has a rental online deal - if you are quick, you only need a 1 month rental) / Paint Shop Pro / I use Painter 12 - older versions like Painter 8 work just as well - I just needed 12 to get PNG in/out.
The program needs layers. 
Open the half frame as a layer, duplicate it, flip copy horizontally and position the baseline/ centerline and combine the two layers. You now have a precise mirror of the half frame.
 
Kate Cory would probably be framed French/American style -  paired frames with the space between +/- half the thickness of one of the pair.   I round - I am working on USS Vincennes 1825  R/S is 26"  Given the range of sided dimensions of the frames I chose to make each frame 10" and the space 6".
 
The point ?  You can use the middle frame shape layer for both outlines of the pair.
 
The metric ruler part - scan in - print out - can be altered by the computer-  Matching up the print out of the ruler with the ruler- the % change in document size needed to be done in the drawing program  to get identity in size is easier to calculate using metric an English scale.
 
Another advantage - colored lines are easier to follow when cutting out and shaping the frames.  With a paint program, it is easy to magic wand a line and change its color.
I make the dead flat centerline shape = red - next one = green, the next one = blue, the next = red....
The paint program color picker has a slider for each of the three colors, so they are easy to set - 
255/0/0  then 0/255/0 then 0/0/255.

For city dwellers, a possible source of stock lumber = your local tree service companies.  I think the wood is mostly junk to them, something they have to dispose of.  You may be able to get some interesting stock for little or no cost.

Dowels are generally a problem as a source for stock for masts and spars.  It is usually an accident for the grain to be straight.  When cut free, they will seek an equilibrium point over time and that can be a curved state.
 
A way to avoid this is to start with plank stock of a straight grained / closed pore species of wood and split the spar stock out along the natural grain.  The hope is that this will be the equilibrium position as Time and Environment act on the piece of wood.
 
The tool designed to do this is a froe.  A full sized froe is used to produce things like Cedar shakes.  There is a smaller version that I have been looking at, but do not own yet:
http://www.japanwoodworker.com/Product/156564/Bamboo-Froe-%28Take-Wari%29---Ikeuti.aspx
 
In most locations  a species of Acer (Maple) should be available locally from hardwood dealers.
White Pine (Sugar / Pattern makers)
Yellow Poplar
Beech or Birch

Dowels are generally a problem as a source for stock for masts and spars.  It is usually an accident for the grain to be straight.  When cut free, they will seek an equilibrium point over time and that can be a curved state.
 
A way to avoid this is to start with plank stock of a straight grained / closed pore species of wood and split the spar stock out along the natural grain.  The hope is that this will be the equilibrium position as Time and Environment act on the piece of wood.
 
The tool designed to do this is a froe.  A full sized froe is used to produce things like Cedar shakes.  There is a smaller version that I have been looking at, but do not own yet:
http://www.japanwoodworker.com/Product/156564/Bamboo-Froe-%28Take-Wari%29---Ikeuti.aspx
 
In most locations  a species of Acer (Maple) should be available locally from hardwood dealers.
White Pine (Sugar / Pattern makers)
Yellow Poplar
Beech or Birch

Dowels are generally a problem as a source for stock for masts and spars.  It is usually an accident for the grain to be straight.  When cut free, they will seek an equilibrium point over time and that can be a curved state.
 
A way to avoid this is to start with plank stock of a straight grained / closed pore species of wood and split the spar stock out along the natural grain.  The hope is that this will be the equilibrium position as Time and Environment act on the piece of wood.
 
The tool designed to do this is a froe.  A full sized froe is used to produce things like Cedar shakes.  There is a smaller version that I have been looking at, but do not own yet:
http://www.japanwoodworker.com/Product/156564/Bamboo-Froe-%28Take-Wari%29---Ikeuti.aspx
 
In most locations  a species of Acer (Maple) should be available locally from hardwood dealers.
White Pine (Sugar / Pattern makers)
Yellow Poplar
Beech or Birch

Dowels are generally a problem as a source for stock for masts and spars.  It is usually an accident for the grain to be straight.  When cut free, they will seek an equilibrium point over time and that can be a curved state.
 
A way to avoid this is to start with plank stock of a straight grained / closed pore species of wood and split the spar stock out along the natural grain.  The hope is that this will be the equilibrium position as Time and Environment act on the piece of wood.
 
The tool designed to do this is a froe.  A full sized froe is used to produce things like Cedar shakes.  There is a smaller version that I have been looking at, but do not own yet:
http://www.japanwoodworker.com/Product/156564/Bamboo-Froe-%28Take-Wari%29---Ikeuti.aspx
 
In most locations  a species of Acer (Maple) should be available locally from hardwood dealers.
White Pine (Sugar / Pattern makers)
Yellow Poplar
Beech or Birch

If this is one of the versions of a 9 inch bench top bandsaw (59 1/2 inch blade length) there is a very useful addition to help it in cutting tight curves ( 1/8  inch blade ).   The Carter products Blade Stablizer is fairly expensive, but is worth the cost.  I bought a 9 inch bandsaw from MicroMark when it was on sale - they no longer vend it.  The mount did not match any Carter model, but it does use a rod and fortunately, a larger rod, so I could use K&S telescoping brass tubing as bushings for an exact fit.
http://www.carterproducts.com/band-saw-products/band-saw-stabilizer/standard-model-2-std2

If you are considering doing serious resawing, you really need a bandsaw with enough power to handle the wood.
The Grizzly G0555X - 14" Extreme Series Bandsaw is the sort of saw that you should be looking at - especially if you are using 110 V.
This model is 110V  and 1 1/2 HP.   A less powerful motor takes forever.
 
A 9" or 10" table top bandsaw is not the best tool for resawing.  Good for scroll cutting and light duty cuts.
 
Holly is a special case as far as wood goes.  It should be cut in Winter,  immediately cut into billets and put in a kiln to dry.
It is subject to attack by a species of mold (Blue mold) that is very aggressive.  You should check the wood before you pay for it.  If it is green (fresh cut wet), you may not get much that you can use. 
 
Getting into scratch building,  you might consider using less expensive domestic species to develop your skills.  Since you have not the tools needed to harvest your own wood "on the hoof"  you might look at available species that have characteristics that we want.
 
Hard Maple is excellent.  
Black Cherry if you want darker.
American Beech is a lot like Maple
Yellow Birch
 
If you do not mind wood that is less dense (softer) - cuts easier and faster
Yellow Poplar (Liriodendron tulipifera ) 
Tupelo  (Nyssa aquatica)
Basswood  (Tilia americana)
 
The open pore distinct grain species do not look good to my eye when they supposed to represent wood at 1:48 - 1:98 scale.
Oak
Black Walnut

If you are considering doing serious resawing, you really need a bandsaw with enough power to handle the wood.
The Grizzly G0555X - 14" Extreme Series Bandsaw is the sort of saw that you should be looking at - especially if you are using 110 V.
This model is 110V  and 1 1/2 HP.   A less powerful motor takes forever.
 
A 9" or 10" table top bandsaw is not the best tool for resawing.  Good for scroll cutting and light duty cuts.
 
Holly is a special case as far as wood goes.  It should be cut in Winter,  immediately cut into billets and put in a kiln to dry.
It is subject to attack by a species of mold (Blue mold) that is very aggressive.  You should check the wood before you pay for it.  If it is green (fresh cut wet), you may not get much that you can use. 
 
Getting into scratch building,  you might consider using less expensive domestic species to develop your skills.  Since you have not the tools needed to harvest your own wood "on the hoof"  you might look at available species that have characteristics that we want.
 
Hard Maple is excellent.  
Black Cherry if you want darker.
American Beech is a lot like Maple
Yellow Birch
 
If you do not mind wood that is less dense (softer) - cuts easier and faster
Yellow Poplar (Liriodendron tulipifera ) 
Tupelo  (Nyssa aquatica)
Basswood  (Tilia americana)
 
The open pore distinct grain species do not look good to my eye when they supposed to represent wood at 1:48 - 1:98 scale.
Oak
Black Walnut

If you are considering doing serious resawing, you really need a bandsaw with enough power to handle the wood.
The Grizzly G0555X - 14" Extreme Series Bandsaw is the sort of saw that you should be looking at - especially if you are using 110 V.
This model is 110V  and 1 1/2 HP.   A less powerful motor takes forever.
 
A 9" or 10" table top bandsaw is not the best tool for resawing.  Good for scroll cutting and light duty cuts.
 
Holly is a special case as far as wood goes.  It should be cut in Winter,  immediately cut into billets and put in a kiln to dry.
It is subject to attack by a species of mold (Blue mold) that is very aggressive.  You should check the wood before you pay for it.  If it is green (fresh cut wet), you may not get much that you can use. 
 
Getting into scratch building,  you might consider using less expensive domestic species to develop your skills.  Since you have not the tools needed to harvest your own wood "on the hoof"  you might look at available species that have characteristics that we want.
 
Hard Maple is excellent.  
Black Cherry if you want darker.
American Beech is a lot like Maple
Yellow Birch
 
If you do not mind wood that is less dense (softer) - cuts easier and faster
Yellow Poplar (Liriodendron tulipifera ) 
Tupelo  (Nyssa aquatica)
Basswood  (Tilia americana)
 
The open pore distinct grain species do not look good to my eye when they supposed to represent wood at 1:48 - 1:98 scale.
Oak
Black Walnut

You do not indicate where you are.   It is usually less expensive to source local wood.
 
 
Ayous    is better known as Obeche ?
It seems to have a grain that is not distinctive - which is good - it looks to be open pore which is not desirable.
It is soft - not my preference - too easy to remove too much - but soft woods - Lime/Basswood,  Yellow Poplar, Tupelo, Sugar Pine are popular and they have closed pore
 
Sapelly    hard, darker brown   Pear, Black Cherry
 
Anatolia    a search returns strange results -  no particular tree -  just a flooring style from the region where Turkey is.
 
Mass market kit manufactures seem to base their choice of wood more on price than what is the better choice of species to use.  Why not drop back 10 yards and punt on letting Constructo choose your wood and make your own choice?

You do not indicate where you are.   It is usually less expensive to source local wood.
 
 
Ayous    is better known as Obeche ?
It seems to have a grain that is not distinctive - which is good - it looks to be open pore which is not desirable.
It is soft - not my preference - too easy to remove too much - but soft woods - Lime/Basswood,  Yellow Poplar, Tupelo, Sugar Pine are popular and they have closed pore
 
Sapelly    hard, darker brown   Pear, Black Cherry
 
Anatolia    a search returns strange results -  no particular tree -  just a flooring style from the region where Turkey is.
 
Mass market kit manufactures seem to base their choice of wood more on price than what is the better choice of species to use.  Why not drop back 10 yards and punt on letting Constructo choose your wood and make your own choice?

I stopped updating my database in 1996,  but up to then, here are journal articles relating to your build:
 
HMS SULTANA
MC CALIP,DANA L
MODEL SHIPWRIGHT
1975
11
250-257  


SULTANA OF 1768  
TAKAKJIAN,PORTIA
SHIPS IN SCALE  
1985
11
80-83   
18TH SCHOONER NA MASTING RIGGING


SULTANA - THE SMALLEST SCHOONER BECOMES A FIRST RATE MODEL
MALCOMSON,BOB
MODEL SHIP BUILDER
1991
72
24-29
18TH SCHOONER

SULTANA  A FIRST-TIME, PLANK-ON-FRAME SHIP MODEL  PT.1
FOX,CHARLES S
SEAWAY'S SHIPS IN SCALE  
1994
5/1
58-65
POF TECHNIQUE 18TH NA

5/2
20-25
5/3
8-14

I stopped updating my database in 1996,  but up to then, here are journal articles relating to your build:
 
HMS SULTANA
MC CALIP,DANA L
MODEL SHIPWRIGHT
1975
11
250-257  


SULTANA OF 1768  
TAKAKJIAN,PORTIA
SHIPS IN SCALE  
1985
11
80-83   
18TH SCHOONER NA MASTING RIGGING


SULTANA - THE SMALLEST SCHOONER BECOMES A FIRST RATE MODEL
MALCOMSON,BOB
MODEL SHIP BUILDER
1991
72
24-29
18TH SCHOONER

SULTANA  A FIRST-TIME, PLANK-ON-FRAME SHIP MODEL  PT.1
FOX,CHARLES S
SEAWAY'S SHIPS IN SCALE  
1994
5/1
58-65
POF TECHNIQUE 18TH NA

5/2
20-25
5/3
8-14

If this is not what you already have: Eurotool  DRL 300
http://www.ottofrei.com/Mini-Drill-Press-110V.html
 
I have seen it priced at~ $60  on one site, did not save the link
 
I have used a # 75 drill  with mine   -  
fit the ML X/Y  table  (drilled 4 holes in the cast base) (costs more the the drill press)
A Harbor Freight momentary foot switch is useful.
 
 
You can use a mill as a drill press   ( I you want robust and expensive )
https://littlemachineshop.com/products/product_view.php?ProductID=4660&category=
 
-  but  because of the bearings, I don't think a drill press will tolerate the lateral pressure when used as a mill