Supplies of the Ship Modeler's Handbook are running out. Get your copy NOW before they are gone! Click on photo to order.
×
Sjors
-
Posts
5,536 -
Joined
-
Last visited
Reputation Activity
-
Sjors reacted to FrozenRabbit471 in Smit Rotterdam by FrozenRabbit471 - Billing Boats - 1:75
Up to this stage I was using CA glue (super glue) with a high viscosity (very fast curing /drying time). Another, more experienced builder advised me to discontinue that glue for various reasons. The primary being, not enough time to work with and it was a very unforgiving bond. It is very runny, gets over everything and once you put your wooden pieces in place, bang, thats it.
It was suggested to use a good quality carpenter's / wood glue. Use of clamps and pins to let dry properly.
Slow down, relax, use great care and finesse.
So I used a medium viscosity of the same glue instead of adhearing to the advise given. I found out pretty quick, the advise was valid. As much as I was convinced things were going great, as I went along, I discovered a misaligned piece 5 moves ago, messed up my current plans. research before you make your next move. pay attention to the advice. If you're uncomfortable with the advice, ask around.
-
Sjors reacted to FrozenRabbit471 in Smit Rotterdam by FrozenRabbit471 - Billing Boats - 1:75
Hello everyone,
I come from Newfoundland Labrador, Canada which is surrounded by water. Unfortunately, living in the western region of Canada I'm in, Lloydminster, Alberta, Canada, (the vast prairies), water is very scarce.
Ironically, my new passion for model watercraft will move ahead regardless. I have no interest in speed boat style vessels, but rather, the larger tug boats, fishing boats and eventually, tall ships. Ive done a lot of research, and it makes more sejse to reach for the mountain before the sky. So for my first build, I've chosen the Smit Rotterdam, by Billing Boats. I also intend to install RC components. This model is expert level for that group/style of vessel.
Some say I am, "ambitious". We will see. So far, I am loving it.
An entry level exploration tall ship is my next target. But, if it takes another boat, such as a fishing trawler, well, I will get my tall ship in good time.
"Long may you big jib draw"
-
-
Sjors got a reaction from popeye the sailor in HMS Sovereign of the Seas by Sjors - DeAgostini - 1:84
Thanks Rich,
The SotS is on hold now for a moment.
I'm busy with the Santísima Trinidad .......bulwark stuf.
Sjors
-
Sjors got a reaction from Canute in HMS Sovereign of the Seas by Sjors - DeAgostini - 1:84
Thanks Rich,
The SotS is on hold now for a moment.
I'm busy with the Santísima Trinidad .......bulwark stuf.
Sjors
-
Sjors reacted to Tallshiptragic in Santísima Trinidad by Sjors - OcCre - 1:90
Awesome colour on those decks Sjors! She's looking good 😊
-
Sjors reacted to popeye the sailor in Santísima Trinidad by Sjors - OcCre - 1:90
awesome deck Sjors.........nice color.
-
Sjors reacted to src in Santísima Trinidad by Sjors - OcCre - 1:90
Sjors! You snuck a new build in on me. Glad I found a seat before the room is all filled up.
Sam
-
Sjors reacted to rafine in Santísima Trinidad by Sjors - OcCre - 1:90
You're off to a great start Sjors.
Bob
-
Sjors reacted to Hennie in Santísima Trinidad by Sjors - OcCre - 1:90
Looking very good Sjors!
I also want to thank you for a very fine sunday. I really enjoyed it
Sjors, Anja and I went to a museum in Rotterdam where many builders from an other building club showed there models.
Some pictures....
Outside the museum the build of the "Delft" and a real anchor....
Hennie
-
Sjors got a reaction from coxswain in Santísima Trinidad by Sjors - OcCre - 1:90
Time for a update.
As I told you before, I receive my false keel.
I place all the frames on it and I'm happy
Also the first deck is ready .
The picture you see the deck without any varnish.
Tomorrow I will place a picture with tung oil on it.
I will do that tonight so it can dry.
The second picture will show you "little" clamps
Just for sure that everything stick together......
Sjors
-
Sjors got a reaction from reklein in Santísima Trinidad by Sjors - OcCre - 1:90
Thanks Denis and Ulises.
Also that for the likes.
@ Ulises,
When the popcorn bag is empty ....just re-fill it
I have plank the decks.
The lower gun deck has also a layer of tung oil.
And I see the other ones also .....Morning Sjors.
I also post a few pictures with the beginning of the planking and the end result.
The bow section looks if it needed some modifications but don't forget...there is a lot that comes at the wall.
So maybe a little sanding paper?
Sjors
-
Sjors got a reaction from coxswain in Santísima Trinidad by Sjors - OcCre - 1:90
Thanks Denis and Ulises.
Also that for the likes.
@ Ulises,
When the popcorn bag is empty ....just re-fill it
I have plank the decks.
The lower gun deck has also a layer of tung oil.
And I see the other ones also .....Morning Sjors.
I also post a few pictures with the beginning of the planking and the end result.
The bow section looks if it needed some modifications but don't forget...there is a lot that comes at the wall.
So maybe a little sanding paper?
Sjors
-
Sjors got a reaction from riverboat in Santísima Trinidad by Sjors - OcCre - 1:90
Thanks Denis and Ulises.
Also that for the likes.
@ Ulises,
When the popcorn bag is empty ....just re-fill it
I have plank the decks.
The lower gun deck has also a layer of tung oil.
And I see the other ones also .....Morning Sjors.
I also post a few pictures with the beginning of the planking and the end result.
The bow section looks if it needed some modifications but don't forget...there is a lot that comes at the wall.
So maybe a little sanding paper?
Sjors
-
Sjors got a reaction from Beef Wellington in Santísima Trinidad by Sjors - OcCre - 1:90
Thanks Denis and Ulises.
Also that for the likes.
@ Ulises,
When the popcorn bag is empty ....just re-fill it
I have plank the decks.
The lower gun deck has also a layer of tung oil.
And I see the other ones also .....Morning Sjors.
I also post a few pictures with the beginning of the planking and the end result.
The bow section looks if it needed some modifications but don't forget...there is a lot that comes at the wall.
So maybe a little sanding paper?
Sjors
-
Sjors got a reaction from coxswain in Santísima Trinidad by Sjors - OcCre - 1:90
Story continues.....
Everything is dry drift to see how it goes.
At the pictures you can see that there is a warped keel/frame/bulkhead.
I put clamps on it to see if I can get it straight.
When I glue the frames/bulkheads ,maybe I can keep it straight.
I know that the glue I'm using are very strong when it is dry.
What do you think.
Sjors
-
Sjors got a reaction from Rossi46 in Santísima Trinidad by Sjors - OcCre - 1:90
Thanks Denis and Ulises.
Also that for the likes.
@ Ulises,
When the popcorn bag is empty ....just re-fill it
I have plank the decks.
The lower gun deck has also a layer of tung oil.
And I see the other ones also .....Morning Sjors.
I also post a few pictures with the beginning of the planking and the end result.
The bow section looks if it needed some modifications but don't forget...there is a lot that comes at the wall.
So maybe a little sanding paper?
Sjors
-
Sjors got a reaction from Elijah in Santísima Trinidad by Sjors - OcCre - 1:90
Thanks Denis and Ulises.
Also that for the likes.
@ Ulises,
When the popcorn bag is empty ....just re-fill it
I have plank the decks.
The lower gun deck has also a layer of tung oil.
And I see the other ones also .....Morning Sjors.
I also post a few pictures with the beginning of the planking and the end result.
The bow section looks if it needed some modifications but don't forget...there is a lot that comes at the wall.
So maybe a little sanding paper?
Sjors
-
Sjors got a reaction from Waitoa in Santísima Trinidad by Sjors - OcCre - 1:90
Thanks Denis and Ulises.
Also that for the likes.
@ Ulises,
When the popcorn bag is empty ....just re-fill it
I have plank the decks.
The lower gun deck has also a layer of tung oil.
And I see the other ones also .....Morning Sjors.
I also post a few pictures with the beginning of the planking and the end result.
The bow section looks if it needed some modifications but don't forget...there is a lot that comes at the wall.
So maybe a little sanding paper?
Sjors
-
Sjors got a reaction from Piet in HMS Sovereign of the Seas by Sjors - DeAgostini - 1:84
Thanks Rich,
The SotS is on hold now for a moment.
I'm busy with the Santísima Trinidad .......bulwark stuf.
Sjors
-
Sjors reacted to Ulises Victoria in Santísima Trinidad by Sjors - OcCre - 1:90
Finally, Sjors!!!
I was just about to finish my bag of popcorn waiting for an update!
Looking good, my friend!
-
Sjors reacted to popeye the sailor in Santísima Trinidad by Sjors - OcCre - 1:90
good to hear Sjors.........your back on track! looks real good too
-
Sjors got a reaction from bbrockel in Le Soleil Royal by EJ_L - FINISHED - Sergal - Scale 1:77 - 1669 Version
Table for two please !!!!!!!
Very, very nice !
Sjors
-
Sjors got a reaction from Eddie in Le Soleil Royal by EJ_L - FINISHED - Sergal - Scale 1:77 - 1669 Version
Table for two please !!!!!!!
Very, very nice !
Sjors
-
Sjors got a reaction from EJ_L in Le Soleil Royal by EJ_L - FINISHED - Sergal - Scale 1:77 - 1669 Version
Table for two please !!!!!!!
Very, very nice !
Sjors
Our Emblem ®
