Jump to content
MORE HANDBOOKS ARE ON THEIR WAY! We will let you know when they get here. ×
Model Machines LLC – Byrnes Model Machines - machines to be back in production soon. ×

MrBlueJacket

NRG Member
 View Profile  See their activity

  • Posts

    1,301

  • Joined

  • Last visited

 Content Type 

Everything posted by MrBlueJacket

  1. MrBlueJacket
    Well done!
  2. MrBlueJacket
    So it's time to install the outriggers for the main braces. The instructions say to drill a hole, then use a sharp blade to square out the hole for the outrigger. In a moment of inspired laziness, I figured it would be easier to round out the square piece than to try and square out the hole. Worked like a charm.
  3. MrBlueJacket
    Very nice job. When you put "finished" in your title, I will make a note in your file that you get 10% off your next kit from us. Nic
  4. MrBlueJacket
    Yes, we have kept a close eye on 3-D printing. From a kit production standpoint, it is prohibitively expensive for not much gain. However, for the modeler, it is practical. For example, if you want to get nice marine figures in 1/192 scale, shapeways has you covered. Look here: https://www.shapeways.com/product/55GX8HF2S/1-192-us-navy-dungaree-set-1?optionId=61093772&li=marketplace And here's one in place on the USS Kidd.
  5. MrBlueJacket
    Looks good, Tim. I found a 1/200 tractor for you: https://www.shapeways.com/product/AEG6GRKJC/1-200-scale-m915-tractor Nic
  6. MrBlueJacket
    Been doing a little of this and a little of that. Like adding the vertical ladder to the deckhouse, the ventilators, anchor chain, bitts, etc. Pretty soon I think I'll be starting the rigging.
  7. MrBlueJacket
    Again, thanks to all for the well wishes. Nic
  8. MrBlueJacket
    The rear deckhouse is permanently installed, and the bilge pump is fabricated. Boy, does it feel good to get back to modeling.
  9. MrBlueJacket
    After painting and installing, plus railings, capstan etc. the forecastle is finished.
  10. MrBlueJacket
    Made the several sampson posts for the forecastle from 1/8" square stock. Pins are for secure mounting.
  11. MrBlueJacket
    So I have been out of the hospital for a week now. Get tired very easily, every day is a little improvement. Got to looking at the RJ last Friday, and wondered why there are no scupper ports in the bulwarks. Careful examination of the plans shows 8 tiny channels from the deck out the hull. I thought "why bother?"but I couldn't ignore them. Here's a shot of one of them (just left of the locker) and its exit. Time to bring out the black touch-up paint.
  12. MrBlueJacket
    If you haven't cut the Spring stay yet, there is an alternative: Seize the middle of the shroud like before, then wrap the shroud line around the lower mast head, and then seize it together in place. A bit awkward, but (I think) easier than cutting a line. Nic
  13. MrBlueJacket
    to RFP: My GUESS is that if the wheel well confined the splash, some of it would be directed against the turn of the paddle, using energy for nothing. Just my guess, but try to picture the water splashing against the top, then back-splashing to the wrong direction. by letting the water splash go higher, it would more likely drip straight downand not impede progress. Nic
  14. MrBlueJacket
    Hi Mort, Our kit represents the Constitution as she was in 1812-1815. Nic
  15. MrBlueJacket
    Tough to remember exactly, but I think I covered the wells all the way down.
  16. MrBlueJacket
    And well you should be! Good job, Stan. Nic
  17. MrBlueJacket
    Again, thanks for all the well wishes. Should be home today or tomorrow.
  18. MrBlueJacket
    Thanks for the thoughts, guys
  19. MrBlueJacket
    Going to be awhile before I post again...Just had a double bypass. Doing well now.
  20. MrBlueJacket
    Thanks much.
  21. MrBlueJacket
    Here's a couple of shots of what's already installed on the model. Bow view: And the stern as well:
  22. MrBlueJacket
    Here's both deck-houses. Just a little more work, and they can be glued on.
  23. MrBlueJacket
    After a break of a week, more progress. Railings installed, and putty on the seams where the sections join.
  24. MrBlueJacket
    It is available for sale. K1107, $599. Having trouble getting on the website, but you can call in an order.
  25. MrBlueJacket
    John and I both belong to the CT Marine Model Society. His choice of the name James Wiser for the boathouse is a tribute to Jim, who was a club member and fantastic modeler. John named the boathouse is his honor after his passing. Also, the CMMS gives out an annual Jim Wiser award for excellence in modeling.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...