Jump to content

HMS Diana 1794 ship's boats by Ray - FINISHED - 1/48 - SMALL


Recommended Posts

Scratch build Dana’s boats @1/48
                        a 26ft Launch,18ft Cutter,24ft Cutter and a 32ft Pinace

After building a set of much modified ships boats for my HMS Diana which I really enjoyed doing, I decided to scratch build a set at 1/48 scale, using the plans in A O S Diana and include masts and rigging, the builds will run along side my deans marine kit build of the WW2 military class trawler HMS Royal Marine  (bought on ebay for less than half price) as practice build before building the Hunt Class Destroyer HMS Tanatside my father served on her at the time of the d-day landings on Omaha.
The boats will not be woodworking master builds, leaving the outside hull showing bare planking, they will be painted as they would have been in service,which gave  them protection, when stored on-board ship, for weeks or months at a time,I will build them depicting  carvel built hulls which according to Ships Boats by q e may they would have been for foreign service,as the clinker built boats were for English Channel use. So they will be a mixture of wood and styrene and I will use grating and anchor kits and possibly oars.
First photos show the set of boats on my model of HMS Diana,these were virtually scratch built.

post-10-0-78566000-1453068744_thumb.jpg

post-10-0-42481800-1453068785_thumb.jpg

 

The first boat a 26ft launch.

The frame plans used, were from The Anatomy of the ship HMS Diana, copies of the half frames were doubled, and then glued to 2mm ply,and the keel plan to 3mm ply,I then did a mock up of a section to see how the planking would look with the first planking with .5mm timber and the second with 1mm. The frame were cut out with my £25 jigsaw buy from good old ebay, I cut the frame centres so they could be broken out and this would leave the ribs in the hull, but added some strips to hold everything together whilst planking. I hope the frames left in the hull will be OK and look like a nice set of ribs, but I do have a contingency plan if they are to rough I will remove them and replace them with dummy ribs made from plastic strip which I know will look nice and sharp and after all they will be painted.

post-10-0-01863300-1453068899_thumb.jpg

post-10-0-14552500-1453068895_thumb.jpg

post-10-0-95133700-1453068903_thumb.jpg

post-10-0-18652800-1453068968_thumb.jpg

post-10-0-30059700-1453068963_thumb.jpg

post-10-0-28323300-1453068974_thumb.jpg

 

 

 

 

 

 

Ray

 

 Current build A set of HMS Diana`s boats @ 1/48

 HMS Royal Marine a Military class Trawler

 Completed  HMS Diana

Completed build The Lady Nelson

Completed Build HMS Pegasus

Link to comment
Share on other sites

Looks like a great plan, Ray.  I'm pulling up a chair for this.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

The hull was double planked firstly with .5x3mm planking, sanded down, and the second planking was 1x4mm, all planking was fixed with std super glue, after the second planking, had been sanded down this gave a hull thickness of around 1mm. The inner part of the frames were broken out exposing the ply ribs, I thought they looked to rough so I decided to use the contingency plan and removed the ribs firstly I added the false keel again from evergreen styrene, I then sanded the inside of the hull,and then added the dummy ribs with styrene which look even and sharp.

Planking

post-10-0-77403700-1453501905_thumb.jpg

post-10-0-74794600-1453501910_thumb.jpg

post-10-0-44221400-1453501915_thumb.jpg

Finished hull

post-10-0-52931300-1453501883_thumb.jpg

frame removal

post-10-0-30671400-1453502022_thumb.jpg

post-10-0-82890200-1453502101_thumb.jpg

Keel added

post-10-0-31705200-1453502159_thumb.jpg

post-10-0-65735600-1453502163_thumb.jpg

Inside hull ribs removed and sanded first dummy rib in

post-10-0-69155500-1453502307_thumb.jpg

New set of ribs

post-10-0-76896000-1453502302_thumb.jpg

 

 

 

Ray

 

 Current build A set of HMS Diana`s boats @ 1/48

 HMS Royal Marine a Military class Trawler

 Completed  HMS Diana

Completed build The Lady Nelson

Completed Build HMS Pegasus

Link to comment
Share on other sites

  • 2 weeks later...

With the ribs fitted the inside has now been fitted out with the floor and decking.

 

post-10-0-63919500-1454196707_thumb.jpg

post-10-0-75227900-1454196779_thumb.jpg

post-10-0-75911600-1454196850_thumb.jpg

 

 

 

 

Ray

 

 Current build A set of HMS Diana`s boats @ 1/48

 HMS Royal Marine a Military class Trawler

 Completed  HMS Diana

Completed build The Lady Nelson

Completed Build HMS Pegasus

Link to comment
Share on other sites

Clearly I'm late to the party, hadn't noticed you'd started.  Following closely Ray as I find these small boats a little intimidating.  Looking great.

Cheers,
 
Jason


"Which it will be ready when it is ready!"
 
In the shipyard:

HMS Jason (c.1794: Artois Class 38 gun frigate)

Queen Anne Royal Barge (c.1700)

Finished:

HMS Snake (c.1797: Cruizer Class, ship rigged sloop)

Link to comment
Share on other sites

The stern seats were added and the winch and davit made, the davit will just be stored on board as it cannot be in place with the rudder mounted,the rudder has also be made, but I will alter the arm,the wash strakes have been added to the hull and the oar slots cut,the boat has been masked up and sprayed with quite a few coats of primer rubbed down after every two coats. Spray painting the boats will be a new venture as I have invested in a small compressor and air brush, and it will be a learning curve, but so far after just doing the primer, I am well pleased with the results, the main thing learnt so far is just how thin you need to get the paint (acrylic) to get a good result.

 

post-10-0-01584300-1454628785_thumb.jpg

post-10-0-08130900-1454628775_thumb.jpg

post-10-0-50922900-1454628760_thumb.jpg

post-10-0-82018900-1454628712_thumb.jpg

post-10-0-82056300-1454628707_thumb.jpg

post-10-0-42834900-1454628770_thumb.jpg

post-10-0-49070300-1454628765_thumb.jpg

post-10-0-30754000-1454628952_thumb.jpg

post-10-0-42320500-1454628956_thumb.jpg

post-10-0-13252200-1454628962_thumb.jpg

 

post-10-0-36621600-1454628780_thumb.jpg

Ray

 

 Current build A set of HMS Diana`s boats @ 1/48

 HMS Royal Marine a Military class Trawler

 Completed  HMS Diana

Completed build The Lady Nelson

Completed Build HMS Pegasus

Link to comment
Share on other sites

  • 4 weeks later...

The mast bowsprit and the rigging has now been completed, with the ropes, buckets, barrels,boat hooks,and oars added, only the barrels were bought the rest made,I will cover that on the next boat in the group,I also made a simple stand out of ply,so the 26ft launch is finished,one down three to go.

Mast

post-10-0-30732200-1457391482_thumb.jpg

post-10-0-80241700-1457391474_thumb.jpg

Stand

post-10-0-74805300-1457391488_thumb.jpg

Rigging started

post-10-0-86429800-1457391591_thumb.jpg

post-10-0-87298200-1457391598_thumb.jpg

Inboard views

post-10-0-35359200-1457391699_thumb.jpg

post-10-0-69347900-1457391705_thumb.jpg

post-10-0-32161100-1457391712_thumb.jpg

post-10-0-54946900-1457391718_thumb.jpg

Finished boat

post-10-0-97286600-1457391818_thumb.jpg

post-10-0-46333500-1457391825_thumb.jpg

post-10-0-07563900-1457391831_thumb.jpg

post-10-0-54376300-1457391836_thumb.jpg

post-10-0-21694400-1457391842_thumb.jpg

 

 

 

 

Ray

 

 Current build A set of HMS Diana`s boats @ 1/48

 HMS Royal Marine a Military class Trawler

 Completed  HMS Diana

Completed build The Lady Nelson

Completed Build HMS Pegasus

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...