Wiktor.L Posted January 14, 2019 #31 Posted January 14, 2019 (edited) Hi. This planks are from kit? In the photos watch is to big. And the planking watch good, but.... wasa_41.tif Edited January 14, 2019 by Wiktor.L J11, md1400cs and Baker 3 Quote Regards. End: Bryg corsair occre, Black Pearl Hachette, Scottish maid artesania, BKA 1125 In build: Vasa deagostini, Dwunastu Apostołów deagostini, Hms FLY amati Novik modelik, spitfire airfix, Wait for build: hms alert shipyard, orp kujawiak wak, hms Beagle occre, thermopyle revell, few JSC models,
md1400cs Posted January 16, 2019 #32 Posted January 16, 2019 Hi Martyn, Just catching up - have been away for a month + (a new employment situation got in the way) Back to a routine now - so will have more time in the evenings to stay current as well -- Very nice progress she is looking very goo indeed. Cheers, BLACK VIKING 1 Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa -
BLACK VIKING Posted January 26, 2019 Author #33 Posted January 26, 2019 Hi Michael glad to have you back m8 and thanks for the comments. The second planking has now been completed and sanded down and I have started marking and cutting the scarf joints and loads of them to do so this might take a little time. Thanks again for looking in and the likes Martyn Old Collingwood, Baker, GrandpaPhil and 7 others 10 Quote
BLACK VIKING Posted February 17, 2019 Author #34 Posted February 17, 2019 Thanks for the likes guys. A lot more work done on the Vasa . The scarf joints have all been completed and the strakes fitted. The top of the doors for the main deck and the frames for the bow doors are made of metal and the instructions say to paint them brown but I didn't like the thought of that so have covered them with some thin strips and then stained them with the same varnish that I used for the deck . Next job a light sand of the outer hull and staining, hopefully some time this week. Thanks for following Martyn JeffT, Old Collingwood, Nikiforos and 10 others 13 Quote
vulcanbomber Posted February 17, 2019 #35 Posted February 17, 2019 This is a really nice build. I will follow with interest. Baker, EJ_L, BLACK VIKING and 1 other 4 Quote First Completed Build: San Francisco (Original Version) Current build: Victory Models HMS Pegasus Cross Stitch Project (Finished): Battle Of Agamemnon and Ca Ira Cross Stitch Project : Victory & Temeraire
maaaslo Posted February 17, 2019 #36 Posted February 17, 2019 Id like to come back to your scarf joint tool. If i understand it correctly, it works just like the stamping, right? EJ_L, Old Collingwood and BLACK VIKING 3 Quote Pavol stands for Paul, Pablo, Paolo etc. Please do not try to pronounce it, just call me Pav...
BLACK VIKING Posted February 17, 2019 Author #37 Posted February 17, 2019 17 minutes ago, maaaslo said: Id like to come back to your scarf joint tool. If i understand it correctly, it works just like the stamping, right? Hi Pav the tool leaves a mark in the wood then I cut them with a scalpel blade just to make them look more pronounced. Thanks for looking Martyn Old Collingwood, Nikiforos and EJ_L 3 Quote
md1400cs Posted February 17, 2019 #38 Posted February 17, 2019 Martyn, Excellent hull & deck planking work EJ_L, Nikiforos, BLACK VIKING and 4 others 7 Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa -
BLACK VIKING Posted February 17, 2019 Author #39 Posted February 17, 2019 1 hour ago, md1400cs said: Martyn, Excellent hull & deck planking work Cheers mate it took ages to do the scarf joints but really happy with the result. Next job getting the right colour on the hull Martyn md1400cs and EJ_L 2 Quote
Snoepert Posted February 17, 2019 #40 Posted February 17, 2019 Martyn, I am at the same stage as you and will wait in interest to see how your staining comes out as I still am unsure wether to paint the hull or do it as the 1:10 scale model has done the finish . Eddie. EJ_L, BLACK VIKING and Old Collingwood 3 Quote Current Projects: Souvereign of the Seas by De Agostini Sciabecco. By Amati Finished projects: Port Jackson by Modellers Shipyard Botter boat by Amati King of the Mississippi by Artensia Latina Endeavor by Artensia Latina
Old Collingwood Posted February 17, 2019 #41 Posted February 17, 2019 Very nice work there so tidy. OC. BLACK VIKING and EJ_L 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
EJ_L Posted February 18, 2019 #42 Posted February 18, 2019 I will echo the above comments and say well done indeed! The scarf joints along with the treenails and bolt location patterns are very neat, clean and uniform. They really make the planking look sharp. fmodajr, Old Collingwood and BLACK VIKING 3 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
Baker Posted February 19, 2019 #43 Posted February 19, 2019 Looks great. Very nicely done Old Collingwood and BLACK VIKING 2 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
BLACK VIKING Posted March 16, 2019 Author #44 Posted March 16, 2019 Thanks for all the likes and comments guys A bit more done on the Vasa . The hull has been stained with one coat of natural oak and two coats of mid oak and the nails picked out with black stain. I have replaced the ladders with wooden ones as I didn't like the PE ones you get with the kit . Painting of lots of carvings has now started in earnest, oh my poor old eyes lol. cheers for looking in Martyn Old Collingwood, GrandpaPhil, EJ_L and 11 others 14 Quote
md1400cs Posted March 16, 2019 #45 Posted March 16, 2019 Martyn, Nice work - This De Agostini Vasa does indeed appear to be THE kit to build. I'm tempted to revisit this ship, but I would end up with an international real estate war. My sweetheart is from Brasil and I'm originally from France haha - My current one is still without a future resting place and then with Vikings next - hmmmm fmodajr, EJ_L, marktiedens and 2 others 5 Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa -
BLACK VIKING Posted March 16, 2019 Author #46 Posted March 16, 2019 Cheers for the comments Michael. Go for it m8 I am sure you would make a brilliant job of it Martyn vulcanbomber, md1400cs and EJ_L 3 Quote
vulcanbomber Posted March 16, 2019 #47 Posted March 16, 2019 Looking good. That's some very intricate painting and very nicely done. BLACK VIKING, marktiedens and md1400cs 3 Quote First Completed Build: San Francisco (Original Version) Current build: Victory Models HMS Pegasus Cross Stitch Project (Finished): Battle Of Agamemnon and Ca Ira Cross Stitch Project : Victory & Temeraire
fmodajr Posted March 18, 2019 #48 Posted March 18, 2019 On 3/16/2019 at 12:40 PM, md1400cs said: Martyn, Nice work - This De Agostini Vasa does indeed appear to be THE kit to build. I'm tempted to revisit this ship, but I would end up with an international real estate war. My sweetheart is from Brasil and I'm originally from France haha - My current one is still without a future resting place and then with Vikings next - hmmmm Martyn, I totally agree with Michael! Excellent work and I wish I built the ship using this kit! Frank BLACK VIKING, marktiedens, md1400cs and 1 other 4 Quote
BLACK VIKING Posted March 20, 2019 Author #49 Posted March 20, 2019 Hi all and thanks for the comments and likes. The Deag Vasa is a super kit to build but is still missing a few details ie the small ports for messages down on the lower hull and the masts are wrong but apart from that it's a cracking ship . I have done some more painting. The carvings that go under the beak are PE and take a lot of patience to get right. To make sure the paint didn't come off it was cleaned with IPA and primed with etch primer then all the details painted on . It will be left for a couple of days to harden up then glued to the beak . Not sure what glue to use as it needs a bit of wriggle room to line up with the backing so CA seems to be out so any help would be much appreciated . Thanks again for looking. Martyn CaptainSteve, GrandpaPhil, marktiedens and 7 others 10 Quote
BLACK VIKING Posted March 20, 2019 Author #50 Posted March 20, 2019 The beak . Martyn J11, marktiedens, CaptainSteve and 7 others 10 Quote
Baker Posted March 20, 2019 #51 Posted March 20, 2019 Beautifully painted. I use CA glue for PE parts. This is indeed difficult, to glue everything neatly in the right place. BLACK VIKING, md1400cs and EJ_L 3 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
EJ_L Posted March 21, 2019 #52 Posted March 21, 2019 CA would be my go to, you just have to make sure everything fits perfectly before gluing. However, you could also look into a slow setting epoxy glue as that would give you more work time but will hold very tight once it sets up. Typically, they are two part epoxy that you mix together. Depending upon the ration of the mix determines how fast they set up. Old Collingwood, BLACK VIKING and Baker 3 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
Baker Posted March 21, 2019 #53 Posted March 21, 2019 Take a look at this Apply PE parts is easy ..... (for some of us) BLACK VIKING, EJ_L and Old Collingwood 3 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
BLACK VIKING Posted March 28, 2019 Author #54 Posted March 28, 2019 Thanks for the comments and likes guys. The decorations have now been fitted to the stem . I went with EJL idea with using epoxy to give me a lot more wriggle time to get them in the right position. More to follow Martyn JeffT, GrandpaPhil, Nikiforos and 9 others 12 Quote
BLACK VIKING Posted March 31, 2019 Author #55 Posted March 31, 2019 Cheers for all the likes guys. A bit more work done on the Vasa The stem has now been built and painted and the messenger port cut into the side of the hull as Deag seems to have missed this out?. I have also fitted the rudder as the instructions tell you to fit it later in the build when all the galleries are glued on and I didn't like the thought of leaning the ship over while trying to fit it . A bit of a heads up the rudder pintails are very hard and snap easy unless you soften the metal first by heating them up over some heat and letting them cool slowly, hope this helps. Back to painting lots more carvings. Martyn Snoepert, fmodajr, md1400cs and 4 others 7 Quote
BLACK VIKING Posted June 26, 2019 Author #56 Posted June 26, 2019 Sorry for not posting for a while but life gets in the way. Any way on with the build . Lots of painting and fitting of the decorations on the side galleries and Stern and boy some of them are small . The stem was painted and the PE fitted . I have started rigging the guns with one pulled back so I can show how the Outhaul tackle was used to pull the gun inboard. Next job finishing the guns then on with more painting. Thanks for following Martyn Nikiforos, md1400cs, Snoepert and 7 others 10 Quote
EJ_L Posted June 26, 2019 #57 Posted June 26, 2019 Beautiful paint work. It looks like you have spent what time you had available for the build well. Great job! md1400cs, fmodajr and BLACK VIKING 3 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
md1400cs Posted June 26, 2019 #58 Posted June 26, 2019 Martyn, Woa!! for a moment I thought that you had added photos of the 1/10th stern as an example- then realized!! - it is your brilliant painting details - You've set the bar very high for this kit - well done Cheers, fmodajr, EJ_L, Snoepert and 1 other 4 Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa -
BLACK VIKING Posted August 3, 2019 Author #59 Posted August 3, 2019 (edited) Thanks Michael for the brilliant comments A bit more done on the Vasa . All the guns have been rigged and rope coils made. The masts I have been making over the last few months have been installed and the rigging started. First up the stays and now we have had some nice weather I decided to do some outside for a change. I have changed the stays from the instructions as the upper ones where wrong as they were just tied up to upper masts without blocks. Once these were completed I started on the shrouds, the instructions were also wrong as they show the shrouds tied singularly and not in pairs as they should be so I have done mine in pairs. More to follow and thanks for following. Martyn Edited August 3, 2019 by BLACK VIKING GrandpaPhil, Snoepert, mic-art and 4 others 7 Quote
BLACK VIKING Posted September 14, 2019 Author #60 Posted September 14, 2019 Hi all. Some more work on the Vasa . The rigging has been started and have completed the formast. The mainmast yard with the sail has been rigged before the shrouds where put on as the rake of the shrouds would make it hard to get to the hallards so decided to do them first. I had to make the ramshead block as instructions for the rigging is totally different from what's on the real ship . To break up the ratline tying I painted some more carvings and placed them in their positions. Looking at the Vasa book I noticed a fixed block on top of the mizzen chainwhale that takes the bottom sheet from the mainsail so made some up from some wood stock . The forebrace and mainbrace have been rigged so it's back to ratlining. Thanks for following Martyn Pat Lynch, EJ_L, md1400cs and 10 others 13 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.