S.Coleman Posted May 21, 2020 Author Share #61 Posted May 21, 2020 Stantchions, bollards and hatch cover coamings going in place. Each handrail stanchion is laser cut and square. To fit into the gunwale the bottom of each peice has to be filed round to fit in the hole. Each bollard is cut from 4×4mm stock and corners have to be filed round. Slowly making my way around the ship. Each stanchion has a taper of 4mm at the bottom and closes up to 2mm at the top. They look uneven but they all measure out correctly. Jeff-E, GrandpaPhil and clearway 3 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted May 24, 2020 Author Share #62 Posted May 24, 2020 Ok little bit more of an update. These past few days i have been busy finishing off the handrails and bollards. Still have to paint the waist deck handrails but its getting there. About to start the steps up the starboard side of the hull. More to come soon...... hof00, Jeff-E, Henke and 1 other 4 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Jeff-E Posted May 24, 2020 Share #63 Posted May 24, 2020 Very nice work on the handrails and bitts😊 Quote Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle Link to comment Share on other sites More sharing options...
Cabbie Posted May 24, 2020 Share #64 Posted May 24, 2020 Looking very good Scott flying along, Don't you have anything else to do😉 Cheers Chris Quote HM Cutter Mermaid 1817 HMB Endeavour 1768 by Cabbie - Artesania Latina - 1:60 - Kit Fiddle Every action has a consequence Link to comment Share on other sites More sharing options...
S.Coleman Posted May 24, 2020 Author Share #65 Posted May 24, 2020 2 hours ago, Cabbie said: Looking very good Scott flying along, Don't you have anything else to do😉 Cheers Chris At the moment im pretty much freed up. Lol always find time to work on it. Cheers for checking in. Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted May 24, 2020 Author Share #66 Posted May 24, 2020 The plans say, Use a strip of 4×4 and make steps....... i was not going to sit there and carve them out so i built my own. I think they came up good enough. GrandpaPhil, clearway and shipcarpenter 3 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
GrandpaPhil Posted May 25, 2020 Share #67 Posted May 25, 2020 Good job on the quarter badges and stern galleries! Quote Building: 1:64 HMS Revenge (Victory Models plans) 1:64 Cat Esther (17th Century Dutch Merchant Ships) Link to comment Share on other sites More sharing options...
S.Coleman Posted May 29, 2020 Author Share #68 Posted May 29, 2020 Deadeye channel's and hatches on the starboard side in. Gave the whole thing a repaint as i wasn't happy with it. Will start on the port side today. Biggest job so far was the clean up of the 12 billion parts that scattered over 12 kms as i knocked over the parts tray while unfolding the 1:1 Plans😡 GrandpaPhil and clearway 2 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted May 30, 2020 Author Share #69 Posted May 30, 2020 clearway, GrandpaPhil and Jeff-E 3 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Jeff-E Posted May 31, 2020 Share #70 Posted May 31, 2020 Looking good Scott, I hope the carpet monster didn't gobble up any of your spilled parts! Quote Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle Link to comment Share on other sites More sharing options...
S.Coleman Posted June 1, 2020 Author Share #71 Posted June 1, 2020 16 hours ago, Jeff-E said: Looking good Scott, I hope the carpet monster didn't gobble up any of your spilled parts! No but i tell you what, it makes you really work hard to find anything Jeff-E 1 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted June 1, 2020 Author Share #72 Posted June 1, 2020 Ok. So here we are with the rudder. Installed yesterday and a couple coats of paint. Looks ok. Shortly be getting ready for deck furniture. GrandpaPhil and Jeff-E 2 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted June 1, 2020 Author Share #73 Posted June 1, 2020 So started on the windlass. Got it all installed and added the bow belaying racks. Belfry added and made a start on the steps from the waist deck. Little bits of touch ups here and there but looks ok. oneslim, GrandpaPhil, Jeff-E and 1 other 4 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted June 2, 2020 Author Share #74 Posted June 2, 2020 Ok so after looking at another couple of members build logs of the Endeavour it got me thinking how so much different these kits are depending on manufacturer. Huge differences and it looks like I had some extras to put on that are non existent in this kit. For example, The windlass shows no strips for the rope to purchase and is simply a smooth round dowel. No Hull armouring for the anchor flukes and no housing for the tiller. This AL kit it pays to do a lot of research unless a straight out of the box build is what you want. Thankfully I have lots of info here at MSW to help. I seem to be looking here more than the plans! I went back and ripped off the belaying bitts to add some sheves, added strips onto the windlass for rope purchase and also added bolts through the knees of the the windlass to the deck. Added grating to waist deck hatch and finished off steps to the aft deck. Will rip off fore hatch combing as it’s too high and re do. Rather now then later. Hope you like. GrandpaPhil, Jeff-E and Richard44 3 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted June 9, 2020 Author Share #75 Posted June 9, 2020 Little bit more done. Have made up more gratings, capstan belaying racks and one of the four pumps is in. GrandpaPhil, Richard44, clearway and 1 other 4 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Jeff-E Posted June 9, 2020 Share #76 Posted June 9, 2020 Good work Scott, I like the modifications you have made to the windlass.👍 Quote Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle Link to comment Share on other sites More sharing options...
S.Coleman Posted June 9, 2020 Author Share #77 Posted June 9, 2020 Better view of pump. Will paint up handel about better and the plunger. GrandpaPhil and clearway 2 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
clearway Posted June 9, 2020 Share #78 Posted June 9, 2020 i hear ya on the kit manufacturers altering details Scott- my billings Victory being a good point- if i listed everything they short cut / altered/missed i would end up with a book! Keith Quote Link to comment Share on other sites More sharing options...
S.Coleman Posted June 9, 2020 Author Share #79 Posted June 9, 2020 Another part missed out was this binacle cabinet. So I made my own out of some scrap 2mm ply. Got the design from the actual replica. homer, GrandpaPhil and clearway 3 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted June 11, 2020 Author Share #80 Posted June 11, 2020 Here some progress on the deck furniture. Four pumps installed along with ships wheel, cabinet and spar and boat gallows. clearway, GrandpaPhil and BenD 3 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted June 14, 2020 Author Share #81 Posted June 14, 2020 Here i have been working on the tiller, boardwalk and tiller housing. Also managed to rig up the ships wheel rigging. Unfortunately some research shows a block and tackle arrangement on the tiller bar and I did not find this out until later. I had already ripped out the original rope as it was too thick. I'll just stick to the AL plans on this one. Scratch built the board walk and tiller housing but still yet to paint it up Fabricated the cat heads and added them on. I know there are some inaccurate details but I'm not too fussed as my skills are limited. I'm happy with it so far. Hope you all like. GrandpaPhil and BenD 2 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted June 14, 2020 Author Share #82 Posted June 14, 2020 Ships wheel with rigging attached. I'm now thinking about installing knees on the deadeye channels as the kit missed out this detail as well. Let's see how we go. BenD, GrandpaPhil, clearway and 1 other 4 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted June 15, 2020 Author Share #83 Posted June 15, 2020 As I was saying. I decided to add knees onto the deadeye channel, cut these out of 2mm ply and painted up tiller housing. homer and GrandpaPhil 2 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Cabbie Posted June 15, 2020 Share #84 Posted June 15, 2020 Zipping along as usual Scott and coming together now, very nicely. There certainly is a lot of detail on these timber ships, keeps you on your toes, but makes them a pleasure to look at. You must have been up early today, can't stop yourself? Cheers Chris Quote HM Cutter Mermaid 1817 HMB Endeavour 1768 by Cabbie - Artesania Latina - 1:60 - Kit Fiddle Every action has a consequence Link to comment Share on other sites More sharing options...
S.Coleman Posted June 16, 2020 Author Share #85 Posted June 16, 2020 13 hours ago, Cabbie said: Zipping along as usual Scott and coming together now, very nicely. There certainly is a lot of detail on these timber ships, keeps you on your toes, but makes them a pleasure to look at. You must have been up early today, can't stop yourself? Cheers Chris Haha yes I had a 3:30 start for work so I was up and about. Lots Iof different details depending on which kit you have. Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted June 21, 2020 Author Share #86 Posted June 21, 2020 The slow and steady progress made on the first set of chainplates. These are made from 0.8mm wire wrapped around the deadeye and then crimped around the attach point on the hull. The deadeyes move freely so I can line them when it comes time to rig the shrouds. vaddoc, clearway and Bob Fraser 3 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
homer Posted June 29, 2020 Share #87 Posted June 29, 2020 Hi Scott, your built is looking good! I actually just finished a ship that didn't have a build log. I'm now getting ready to start on my HMS Endeavour I purchased years ago. It's a Corel 1:60 kit and has been sitting there with others waiting to be built. However, as I unboxed it and began looking at MSW build logs I see that the Corel design is not very realistic. I like the OCCRE kit but it's costly. I found your exact kit on eBay for a very reasonable price and just bought it. It will probably be a week or so before I receive it. Hope you don't mind if I reference your log (since you will be well ahead of me) during my build. Ya know, the wood in the Corel kit, especially the bulkheads look very nice. Hopefully the wood in the AL kit won't be too bad! I've noted that their keels are sometimes warped. Anyway, I'm pretty excited about building this ship. I'm a fan of Captain Cook and have some authentic prints I purchased in Maui about 35 years ago! Anyway, just wanted to say Hi and I like what you've been doing to your build. Take care. Ron Quote Current Build: Charles W. Morgan - 1:64 - Model Shipwayshttp://modelshipworld.com/index.php/topic/9559-charles-w-morgan-by-ron-lang-model-shipways-164/#entry282430 Past Builds: - HMS Greyhound - 1:100 Scale by Corel - http://modelshipworld.com/index.php/topic/8942-hms-greyhound-corel-scale-1100-as-appeared-in-1720/#entry264094 - Corsair - 1:80 Scale by Occre http://modelshipworld.com/index.php/topic/8743-corsair-by-homer-occre-scale-180/?p=259481 - HMS Bounty - 1:48 Scale by Artesania Latina - http://modelshipworld.com/index.php/gallery/image/9554-bounty/ Link to comment Share on other sites More sharing options...
S.Coleman Posted July 3, 2020 Author Share #88 Posted July 3, 2020 Hello Ron. Glad to see you dropped in. More than happy for you to reference my log. I don't seem to post photos of my build steps rather than just post photos of the completed section. Which I should. I had no dramas with warped keel or poor fitting bulkheads and my kit is very old. I'm currently making the deadeye chain plates and its taking a while. So I haven't posted for a bit. No one wants to see 10 or photos of chain plates!! Very soon I'll be making a start on the bowsprit. I like the corel kit too but it is costly. I found so many differences between kit manufacturers so I've taken a little bit from here and there and scratch building some parts. Cheers for dropping in. Scott Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted July 5, 2020 Author Share #89 Posted July 5, 2020 As mentioned above im not going to place a lot of photos of chainplate assembly but I will post these as evidence I'm still working on the ship haha. port side chain plates are now encased with strip on the outside and painted. Starboard side has them installed and need some tweaking to look straight and right. Hope you all like. GrandpaPhil, BenD and clearway 3 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted July 12, 2020 Author Share #90 Posted July 12, 2020 Moving on from chain plates I have made a start on the bowsprit The various cleats and bee are in position. The jack staff complete with block attached The ship at a glance of progress. Happy with the outcome so far. Cabbie, BenD, BLACK VIKING and 2 others 5 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.