Jump to content

Recommended Posts

Posted

 Beautiful build, Bruce. To rub it in a bit, it was 24C here in Michigan today. 

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted
17 hours ago, AON said:

+17°C (62.6°F) down here.  You should be experiencing a chinook any time now!

 

She is really looking good (just to be clear I am referencing the model) 😁

Thanks Alan! Coming along slowly... supposed to be back above 0 by next week...

Posted
14 hours ago, druxey said:

Would the inside of the wheelhouse be painted white?

That is a thought... photos show the exterior was painted white, same as the hull. The original structure was stained or varnished, and this finish is still seen on the lobby and head that remain behind the cabin area. There was a likelihood that the interior was also stained and varnished, that was a common practice and it is how the ship is finished today. Another, less likely, possibility is that it was painted buff... 

Appreciate your thoughts!

Bruce

 

  • 2 weeks later...
Posted (edited)

G'day all, and thanks again for looking in!

I am continuing to plug away at the wheelhouse and cabin area... 

As you can see from the picture below I have got some paint on, some doors and window frames installed, and I'm working on the rear wall of the wheelhouse with the chart table roughed in. After considering the painting options I decided to go with the wood varnish, to match what appears to be her original deckhouse finish.

I make this look by using Tamiya Brown (coloured wood stain works equally well) then overpainting with Tamiya Clear Orange.

I am following the original 1928 plans for the wheelhouse layout, assuming the original was copied when it was moved forward, then the two cabins tacked on behind. 

20250324_132228.thumb.jpg.c2d4c864d07353a3f6ed011a9a731acd.jpg

I installed the three remaining fairleads and some poop deck fittings that are easier to put on now instead of trying to work around the deckhouse. 

I've also set up my decal sheet and my son is using photoshop to turn the pictures into decals... 

This is a screenshot of the Word document I prepared for the decal sheet layout. The pictures are pretty much close to the final sizes... what the Photoshop will do is adjust perspectives so you look straight on, like for the Plimsoll lines. Then remove the backgrounds leaving what will become the decals!

20250325_092213.thumb.jpg.772a6dd2f6588e20ba8cb6c1dd1134fd.jpg

 It is hard to see, but at the bottom of the sheet is the chart of Queen Maud Gulf that will be placed on the chart table!

Rain is in the forecast so I hope to get some more work done soon!

 

 

Edited by Lecrenb

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...