McSpuds Posted September 29, 2013 #1 Posted September 29, 2013 I have finally returned to the hobby from a long break. I see the group build for my project is over but I will continue it here in the scratch build area. I have recuperated photos from my older "Syren" build to catch everyone up to where I am now with her. I will have to knock off the dust and check all the joints to ensure they are solid. It has been sitting on top of my shelf since 2007. I first took my files to Kinkos and had the prints made. This was my booklet stayed in one piece! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! Quote Group Build - Triton Cross Section Abandoned - USS Syren
McSpuds Posted September 29, 2013 Author #2 Posted September 29, 2013 After getting some wood in, I also purchased a mini table saw. I still need to get my drum sander! Here you see the bulkhead layout and the bearding line being prepped. For a larger view, click here! For a larger view, click here! Quote Group Build - Triton Cross Section Abandoned - USS Syren
McSpuds Posted September 29, 2013 Author #3 Posted September 29, 2013 (edited) After prepping the lines I then shaved the bearding line and added the rabbet strip as wel as the stem knee and keel. For a larger view, click here! Edited September 29, 2013 by McSpuds Quote Group Build - Triton Cross Section Abandoned - USS Syren
McSpuds Posted September 29, 2013 Author #4 Posted September 29, 2013 Now on to the bulkheads. Some of these where so tight I had to shave the paper off of the bulkhead former. For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! Quote Group Build - Triton Cross Section Abandoned - USS Syren
McSpuds Posted September 29, 2013 Author #5 Posted September 29, 2013 I then placed filler blocks in between the bulkheads. I also did the planking between 16 and 20. For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! Quote Group Build - Triton Cross Section Abandoned - USS Syren
McSpuds Posted September 29, 2013 Author #6 Posted September 29, 2013 I so hated this part.... flaring the bulkheads... ugh! For a larger view, click here! For a larger view, click here! You can see the runner I used to help flare the bulkheads..... For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! Quote Group Build - Triton Cross Section Abandoned - USS Syren
McSpuds Posted September 29, 2013 Author #7 Posted September 29, 2013 Framing in the gun and sweep ports now began...... I used a jig to cut some of the peices, but still a lot had to be sanded... For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! For a larger view, click here! Quote Group Build - Triton Cross Section Abandoned - USS Syren
McSpuds Posted September 29, 2013 Author #8 Posted September 29, 2013 (edited) Now the planking begins..... Shortly after this I deployed, and then sadly was unable to continue upon my return due to an injury. Then work and life kicked in hard and I had decided to shelf my boat till I could take more time with her. Now that I am retired, and my injury has been corrected enough to allow me to enjoy my hobby, I once again continue on the build! I hope the brief explanations above are ok, it was a long time ago and I can not remember all the details on why I took each photo. From here on out there will be more detailed involvement in the explanations... For a larger view, click here! For a larger view, click here! For a larger view, click here! Edited September 29, 2013 by McSpuds trippwj, Chuck and yvesvidal 3 Quote Group Build - Triton Cross Section Abandoned - USS Syren
michael20 Posted September 29, 2013 #9 Posted September 29, 2013 Man McSpuds, Great start on your Syren . I'll be looking forward to seeing your progress. Quote
McSpuds Posted September 29, 2013 Author #10 Posted September 29, 2013 Slow start, LOL 2007.. this has to be one of the oldest builds here. Quote Group Build - Triton Cross Section Abandoned - USS Syren
mtaylor Posted September 30, 2013 #11 Posted September 30, 2013 Looking good, Terry. I don't think you're in the running for the longest build... Wintergreen's Regina I think owns the record. Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Rustyj Posted September 30, 2013 #12 Posted September 30, 2013 Hi Terry and a hearty welcome back. Minimal explanations on the old pictures are fine. I vaguely remember what I did on a current build let alone one so long ago. Great to see you are back and I look forward to another scratch Syren. Quote Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout
shah2003 Posted October 8, 2013 #13 Posted October 8, 2013 HI Terry, I just started building my own Syren and find your build log very helpful, thank you! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.