Blue Ensign

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One Hundred and Seventy
 
Completing the Cutter.
 
Apart from painting the bottom Ivory, and the wale Black/grey, the boat will be finished using w-o-p only.
 
The rudder is a plain laser cut affair intended I think to simply display in the sternsheets of the boat. There are no fixings to hang the rudder either on the stern post, transom, or rudder.
 
I chose to add these fittings including a tiller of the yoke type.

4287
Still requires a little further fining down, this is the third attempt which may still break.

4289
Trial fitting the rudder.; a few tweaks required.
 
One consequence of changing the rowing arrangement from double to single banking is that the provided oars are too short for purpose.

4290
They are fairly easily modified but it does require using two oars to produce one. 
To improve the look of the oars the blades should really be thinned towards the tip.

4295

4298

4299

4311
Set -up for single banked rowing.

4302

4306

4307
I quite like the look of her on the skids and the Pinnace and Cutter don’t obscure much of the Main deck.
 
B.E.
16/04/2024

Post One Hundred and Sixty – nine
 
Progressing the 24’ cutter
The floor of the cutter is covered by gratings at the stern, open boarded footwaling for the body, and a small close board platform at the bow.

4265
I changed the footwaling to a close boarded version as shown in the AotS book Diana which contains 1:48 scale drawings of a 24’ cutter.
 
Before I add the ‘false’ ribs I use a copy of the kit plan to mark the positions of the thwarts.
Positioning the ribs really needs to take into consideration the position of the thwarts and the related rowlocks for the oars, which are cut into the wash strake.

4268
The AotS drawings show the 24’ cutter arranged for single banked rowing. This is the arrangement I will follow, apart from any other consideration, there are less rowlocks to cut.

4270
I firstly fix only those ribs that fit aft of the thwarts before fixing the Rising, (thwart support strips) The remaining ribs can be slotted behind the Risings in the correct positions.
The risings are fitted using a 4mm depth gauge but in fact follow the line of the second strake down from the top.
 
Once fitted it is useful to check both the levels and the correct height of the thwarts above the footwaling.

4273
My 1:64 scale figures are useful for this purpose.

4275
I would like to see a sitting figure produced by Vanguard. A sitting Captain would serve well to give scale to the splendid Vanguard cabin furniture, and also the stern sheets of the boat range.

4277
I like to add small features to the boats such as here; the cap square for the Mainmast and step to take the mast heel on the Keelson.

4279

4280

4281

4280
Needs cleaning up now before finishing.
 
B.E.
15/04/2024
 
 

I've not seem a specific reference to Foreign Service  locations, but I suspect it generally meant any location beyond home waters , particularly the tropics where  repair facilities may be restricted. Clinker built boats were more difficult to repair and WE May (The boats of men of war) cites that in 1800 it was decided that the only cutters to be sent abroad should be Jolly boats. Navy board orders to Dockyards PRO  adm 106/2512 no's 430 440/441.
 
For the purposes of this build the cutter will be issued as carvel built.

9898(2)

9899(2)
 
I do however, have a clinker built 18' cutter (Jolly Boat) ready to serve.
 
Cheers,
 
B.E.
 
 

Post One Hundred and Sixty-Eight
Feeling somewhat miffed about the failure with the Launch I am moving onto one of the 24’ Cutters, if for no other reason than ‘getting back on the horse’ 
I have made 18’ Cutters previously, along with Yawls, and a 24’ Cutter should at least on paper be less fiddly.

4245
Before I had barely got started the tab broke off the transom piece, and once again the stern post broke part way up. This is before I even get to the delicate stem with its planking slot.
 
I am beginning to think that use of 0.8mm Pear is just too thin for the structurally important keel part.
 
It is pertinent that the grain on these parts is horizontal whereas any pressure tends to be lateral. It seems that any pressure, however light,  gives a high risk of breaking these parts.

4243
At least with the 24’ cutter there are two sets provided, and in my case one was cannibalised to get to the keel and frames assembled.

4248
With the fairing completed this is the same point at which things went wrong with the Launch. 
I added further support to the stem before I began planking, and this time I resolved to use pva on the plank edges in addition to ca on the frames.

4252
The first four planks fit into the stem rabbet, or slot, happily without mishap this time. At this point the structure is much stronger, and damage risk to the stem much reduced.

4254
The garboard planks are fitted using 3mm strips.

4256
There is too little room to follow any sort of tick marking for plank shaping, so its basically done by eye. The aim is to get any less than realistic planking strakes below the round of the hull, out of sight.

4258
I achieve this by spiling the last plank.
 
Unlike the Pinnace, removal of the central bulkheads did not result in disassembly of the planking, no doubt due to adding pva along the strake joints.

4259
There is no access to clean inside glue stains during construction so there is inevitably marring present once the bulkheads are removed.

4260
A gentle approach is necessary, I clean the insides initially by damping the excess glue with a small paint brush and gently scraping with a micro chisel.
 
Water is used for the pva and acetone for the ca. very small amounts are used to avoid affecting the main construction.

A little more fettlin’ and I can move onto the next stage.
 
 
B.E.
11/04/2024

Post One Hundred and Sixty-seven
 
The 26 ft Launch - The Good, the Bad, and the Ugly.
Altho’ the main work on Indy has been completed, the overall display requires further work.
Building the Launch continues my work on the boats. I like the Launch because it offers opportunity to add detail such as the windlass.
I have been here before as I made up the 24’ Launch for Sphinx. This didn’t however guard me against breaking the stern post (twice) during the fitting of the transom.

4227
Again, I thought it prudent to add little support pieces to the build board to reduce any flexing during the fairing business. These small boats are delicate and require gentle handling particularly in the early stages.

4232
The fairing went ok.

4235
Regrettably, the stem broke in two places along the planking slot during the testing of the first planking strip, hardly touched it Gov’ner, and the repairs didn’t hold.

4236
I suspect it was a combination of the inherent weakness related to the planking slot, plus possible grain run of the stem.

4239
I did think about replacing the stem element, but removing the frames from the base resulted in what our American friends may describe as FUBAR.
 
Sadly, Indy will be without her Launch, but stuff happens – right.
 
B.E.
07/04/2024
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One Hundred and Sixty – nine
 
Progressing the 24’ cutter
The floor of the cutter is covered by gratings at the stern, open boarded footwaling for the body, and a small close board platform at the bow.

4265
I changed the footwaling to a close boarded version as shown in the AotS book Diana which contains 1:48 scale drawings of a 24’ cutter.
 
Before I add the ‘false’ ribs I use a copy of the kit plan to mark the positions of the thwarts.
Positioning the ribs really needs to take into consideration the position of the thwarts and the related rowlocks for the oars, which are cut into the wash strake.

4268
The AotS drawings show the 24’ cutter arranged for single banked rowing. This is the arrangement I will follow, apart from any other consideration, there are less rowlocks to cut.

4270
I firstly fix only those ribs that fit aft of the thwarts before fixing the Rising, (thwart support strips) The remaining ribs can be slotted behind the Risings in the correct positions.
The risings are fitted using a 4mm depth gauge but in fact follow the line of the second strake down from the top.
 
Once fitted it is useful to check both the levels and the correct height of the thwarts above the footwaling.

4273
My 1:64 scale figures are useful for this purpose.

4275
I would like to see a sitting figure produced by Vanguard. A sitting Captain would serve well to give scale to the splendid Vanguard cabin furniture, and also the stern sheets of the boat range.

4277
I like to add small features to the boats such as here; the cap square for the Mainmast and step to take the mast heel on the Keelson.

4279

4280

4281

4280
Needs cleaning up now before finishing.
 
B.E.
15/04/2024
 
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.
 

Post One hundred and Seventy-one
Album photo's
I have at last got around to taking the completion photo’s which will form part of the Photo build record book that I’m currently putting together.

4395
4361A

4392

4364

4365

4391

4390

4396

4369

4405

4395

2161A

2145a

4397

2162a

2164a

4380

4379

4388

4494a
I am currently faffing around with a clinker built 18’ cutter, and ‘Indy’ is yet to be enclosed in her case, so the story has not quite ended.
 
Then there’s the 26’ Launch, still on my mind.
 
Cheers,
 
B.E.