mtdoramike
-
Posts
2,089 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by mtdoramike
-
I ordered a new set of plans, which were $27.00 total shipped from Dumas. I separated all of the building materials and ditched the box since it suffered quite a bit of water damage and shown signs of mold and mildew. I also took a solution of mild soap, bleach and water and wiped down the blonde wood sheets just in case of any mold then clamped them down to try and keep any warping to a minimum. Everything looks good and dry.
-
Here is what I received in the mail regarding the Typhoon kit. First off, the kit is huge, the shipping on it was $48.50, so remember this when you want to purchase an already built model. The box is quite water damaged with a little mildewing, but the contents seems to have been spared for the most part. The plans are pretty much toast because of getting wet, the ink smeared quite badly. No biggie, I can order new plans from Dumas for about $25.00.
-
Why not just list them in stead of trying to be all fancy and junk. I can't open it either. So you are limiting your selling ability.
-
Tell me about it, sometimes I question my sanity as well, especially when the initial builder does such a poor job and try and salvage the unsalvageable. mike
-
I have an opportunity to pick up an orphaned Dumas Typhoon mahogany runabout for the cost of shipping from a fellow builder, who received it as well but isn't interested in building it. he says he things all the parts are there, but who knows, it's a shot in the dark and a bit of a gamble. But I tend to be my own worst enemy at times and a really glutton for punishment. So, we'll see how it goes. But this is one of those kits I would LOVE to build. I had planned to retire from modeling with maybe an occasional small build here and there, but since heart surgery they have been finding me like stray puppies following me home from school.
-
I built the Billings Danmark several years ago and it was one of my all time favorites to build. It was a pleasure to build, but it wasn't nearly as stunning as yours, man that is a real beauty.
-
Enzo Ferrari by CDW - Tamiya - 1:12 Scale - PLASTIC
mtdoramike replied to CDW's topic in Non-ship/categorised builds
Me three, I love Tamiya kits. This should be fun. -
Thanks CD, here is a few updated pics of the Ratlin Rita, she is almost finished, with just a few odds and ends to take care of.
-
Back up for sale: 1930 Chris Craft Mahogany Runabout, it will come receiver ready, all you have to install is your own receiver and battery, I have it setup for 3s-4s lipo, but you can add any battery you want. It's the large 36 inch model. It has a brushed FMA 850 can motor, brushed speed controller, metal geared servo. It will be done within the next two weeks, so if anyone is interested in the Ratlin Rita, PM me. Now, I'm willing to ship this boat IF, the buyer is willing to pay the shipping cost and the packing materials, which could run as high as $100.00 depending on where you are located, such as California, west or Midwest. I'm selling this model for less than what the unbuilt kit cost, which is about $400.00, running gear, I have another $100.00 or so in her, not to mention $75.00-$100.00 in building materials, labor to build her was well over 225 hours. The Ratlin Rita is $375.00.
-
WOW, that looks like a pretty good piece of work you have there, but a 200 year old model to me would be such a honor to do the repairs. Good luck on her and I wish you the best on her. If I had the extra cash, I would have been quite tempted on your Prince, I do love Constructo kits. But like you, I have a few others waiting there turn.
-
I love this model, one of these days, it's on my radar.
-
Thank you Nils, it was a total blast finishing her up. The Queen is a fun build and who knows I might do another one of these days.
-
Here is some pictures of the Creole Queen that the new owner sent to me sitting in her new home
- 16 replies
-
- 2
-
-
- finished
- creole queen
- (and 1 more)
-
Thanks guys, Rita will be finished in the next couple of weeks, a little fine tuning here and there, installing the running gear and putting on the final touches.
-
I have had a couple of pm's regarding the installation of the graphic. I sealed the stern as with the entire hull with epoxy resin, then applied the vinyl graphic to the stern and then sealed it with a couple of thin coats of clear coat epoxy resin. Rita ain't going any where, but she can be covered with a thin mahogany veneer and epoxied over. Or you can sand and sand and sand until you remove the graphic, but that would near about be criminal. If she don't get your motor hummin then you better check your ticker. I hope to have the Ratlin Rita finished within the next couple of weeks if any interest in buying her, I will be listing her on the classifieds.
- 52 replies
-
- 2
-
-
- dumas
- Chris-Craft
- (and 1 more)
-
The decals are vinyl printed on transfer paper and are a peel and stick. I didn't print it, I purchased it from another forum member.
-
Well here is the finished stern of the Ratlin Rita. Ain't she purdy? Don't go falling in love with her now unless you got the cash hahahaha.
- 52 replies
-
- 6
-
-
- dumas
- Chris-Craft
- (and 1 more)
-
Your right CD, I had a senior moment, I know they were love bugs, I have been dealing those bugs since the late 60's.
-
By the way, I have decided to go with the 2oz cloth, which will be strong enough, I found the 4oz to be a bit too heavy. Now had I built the Ratlin Rita to keep, I would not have used fiber glass cloth to strengthen it. To me, its a wasted step unless the substructure is a light wood like balsa, but the substructure of this kit was plywood. Once it's coated with 4 coats of resin, you could drop it off of a building and probably wouldn't have a leak. But since it's going up for sale, I would go the extra effort.
- 52 replies
-
- 1
-
-
- dumas
- Chris-Craft
- (and 1 more)
-
I decided yesterday that would lay down some fiber glassing on the Ratlin Rita, but as I usually do before starting a fiber glassing project, I will use a piece of scrap wood and practice a bit if its been several months since I had last done it. I did some fiber glassing on the scrap board with both 4oz and 2oz cloth. When I finished with the scrap wood, I went inside for dinner as was preparing to glass the Rita when I noticed the scrap of wood was full of Lady bugs. I didn't see a one of those damn bugs when I went inside, but within an hour they managed to find the scrap wood and get stuck in the resin. Now had that been the Ratlin Rita, that would have made a preacher cuss and especially me since I ain't no preacher. So Glassing will have to go for another day.
- 52 replies
-
- 2
-
-
- dumas
- Chris-Craft
- (and 1 more)
-
I got the hatches all planked and sealed with resin. I'm getting ready to start laying fiber glass in a day or three. Boy she is looking sweet.
- 52 replies
-
- 5
-
-
- dumas
- Chris-Craft
- (and 1 more)
-
Here is my opinion, buy what you want and build what you want as long as you have these forums as a resource because no matter your furniture wood building experience, which helps, it's not quite the same. I'll tell you your first major pitfall will be planking the hull. So you should look for the best hull planking tutorial book you can find, also check these forums out for planking tutorials, you will need them. So good luck on your first build. Great ship kit review James.
Our Emblem ®
