Ronald-V

Thank you for the warning! I did have checked it when I dry fitted the lower counter. So I think i'm good there. But will check it again, because i'm a bit in doubt now haha. Double check wouldn't hurt 👍

You are doing well, these steps are pretty fast with all the lasercut pieces.

Greetings from Friesland I wish you all the best with this build. It's a beautiful ship when it's finished!

Nice job! Looks like a fun little project. Looking forward to tackle it myself

Those ropes look great! It looks very realistic, how they just laying there...nice job

That looks really good! Maybe going to implement those also on my Sphinx. Your method to add the chamber doesn't look too complicated.

Going super fast! 👍 Looking good

Have fun with this nice kit!

Thanks Allen for clarification...yeah there were a few examples in the topic that I posted, on contempary models but also for example the HMS Victory. But I do think i'm going now for only the bottom and sides of the gunports. It does look good and it's also a bit less work. I need to see if I have some 0.6 material laying around, otherwise I settle at 0.5 pear that I have in stock. That tenth of a mm...I can handle that difference

Thanks Cjames! That's a helpful post . At first I wanted to do all 4 sides of the gunport, but looking at your close-up...3 sides do look good also, so maybe going for that too. 1/32 is about 0.8mm so you used the same material as the outer planking? My thoughts were to use 0.5mm thick linings (not sure how much inch that is ). Will experiment a bit with different sizes, and what looks best.

New update about what I've done this week: Installed the prow, keel and rudder post, including their outer patterns/facings so to speak. This gives the ship a whole new appearance. After that I glued the outer lower counter pattern in his perticular spot. This all went without trouble. Now I could measure the space between this pattern and the rudder post, so I could fill the difference with a thin piece of pear wood that I abstracted from the same sheet where also the outer patterns came out of. So there is no color difference Because of the thickness difference (the outer patterns of the rudder post and keel are 1mm thick and the supplied outer pear planks are 0.8mm thick) I maybe need a bit of filler underneath the second layer of pear planks against the rudder post and keel. Just to get them at a even height in the end. Will think about how to approach this. Last step that I've done was soak the fore outer planking patterns and clamped them onto the hull. They have dried overnight and will glue them soon onto the hull. A bit exciting these larger thin pieces of wood, so I need to gather some courage to get them in a good way onto the hull I also thought about the gunport stops and if i'm going to do them on all the gunports and not only at the ones with actual lids. I saw this idea in Blue Ensigns log and like the look when all the gunports have the stops, including those without a lid. So i'm going for those...it looks fairly easy to execute this small modification. The two questions after that were...glueing first the patterns onto the ship and install after that the stops? Or do them first and glue the patterns after that. I go with the first option because the outer patterns have a bit of extra "meat" onto the gunports...they are a bit smaller then the mdf inside frame so you have some wiggle room and you can sand them afterwards flush with the mdf framing. So it looks to me easier to install them afterwards. Next question was...at all four sides a stop or only at the sides and the bottom? I found this topic: And saw that both options look correct. It didn't seem if there was 1 correct answer, so then I choose for asthetics and will do all 4 sides because I find that look more appealing.

That looks great! Nice modifications...looks more lively

Very nice clean work! Love it!

Indeed your Alert looks great! Such a sweet little cutter, I like your progress so far

That looks very good!

You can see it's one of your specialties...very nice painting job and thanks for explaining

Yeah those numbers of crew members are always mind boggling with these old ships. So weird how everyone fitted in and on these vessels. Life was hard back then. 😮

Do I see it right that you also (not sure how to call it, but the small red edge on the inside of a gunport) lined off the gunports, like Blue Ensign also did in his version of the Sphinx?

That sleepy captain gives really a impression what a monster this ship is 😮

Really nice, you are doing a great job! Also beautiful lines in this ship

Just sharing my solution how i've dealed with that little gap between the first layer of planking and counter planking. I used some filler to fill up the gap, also to give everything some strength because it's connected to each other. And at the counter planking I glued a extra 1 mm thick piece of pear so it covers the gap nicely. Now with testing a scrap piece of pear of 0.8mm (the second layer planking thickness) there no height difference anymore and it looks nice level to each other. Also if i'm not mistaking later in the construction the bottom part of the counter piece will be covered with a decorative strip of wood.

It´s a cool unusual design, I like it! It somehow reminds me of a little tank but then on water

Thanks Glenn, that's helpful 👍

Yes I saw it in your new build log. It does look good with the filler piece in. Thanks for your input

That's is truly a fantastic result! Congratulations!