newbuilder101

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Thank-you everyone for the well wishes! My eye is healing quite nicely.
I've put together a very basic mini tutorial and hope it may be of help to someone.
 
I bought a brass turned cannon, of the correct scale for my ship, to use as a reference model.
I had a piece of round plastic dowel on hand, which I carved and sanded until it was the same size as the reference model.
Next, I cut paper trapezoids and rolled them around the plastic dowel, and sealed with some white glue. The dowel ensured that all my cannons would be the same.
 

 

 

 
Next up, I marked the location for each ring, by comparing to the reference model and cut very thin strips of paper and glued them in place. This can be tricky since the paper tube is narrow at one end and the strip naturally wants to spiral up the tube.
 

 

 

 
The cascabels/miniature mushrooms    , were fashioned from polymer clay, then baked and glued in place. I had tried carving them from a wood dowel, but decided that clay would be a faster option.
 

 

 
At this point the "bore" was added. I dipped a toothpick in white glue and applied a thin film around the inside of the end of the cannon. Once dry I repeated once or twice more as needed.
 

 
This picture is a repeat from my last update, but it gives a good idea of the different stages.
 

 
Finally, a couple of thin layers of flat black acrylic were added and allowed to dry, followed by dry-brushing with yellow-ochre that was tamed down with a little brown.
 

 
This last picture shows the finished paper cannon beside the original brass cannon, which I also painted. 
 

 
If you have any questions, please feel free to ask.

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Finally, a long overdue update! I started out well with photos of each step and then as life got busy the photos fell by the way. The last few pictures are of each completed piece without process pictures. 
 
I experimented with a few different materials for the stern lanterns, but finally settled on card. The lanterns could not be solid because of the fiber-optics that I had to feed up through the tiny brass tubing and into the lanterns. This was a very tricky process due to the tight fit and bends. I'll try to add some pictures in the next day or so with the lanterns "lit".
 

 

 

 

 
Some more items completed.
 

 

 

 
And placed on deck. I also completed the first of three sets of spiral staircases.
 

 
I also managed to make and place some of the decorative pieces and dolphins.
 

 
Last, but not least, a shot of the stern so far and profile. 
 

Thanks very much Greg, John, Nils, Jan, George, Russell and Pat .
 
 
Jan - it's 28mm tall.
 
 
Russell - Because I could . I don't doubt the PE one would be accurate though.
 
 
Vulture only needs the one.
 
Here's the finished job. I've just now given it a coat of Minwax which hasn't dried yet :
 

 

 

 
 
 
 Danny

Thanks Greg.
 
.... continued.
 
Here's a pic of the progress. The base has been fitted to the munions :
 

 
The Stool was a challenge :
 

 

 
There are several rims between the pieces. I glued each piece to some 0.5mm thick stock and sanded the edges to shape when it dried. This was then rounded with a sanding stick :
 

 
The centre munions were fitted next. There is still some sanding to be done to get the verticals down to size in this pic. The "glass" (acrylic) has been fitted :
 

 
I filed the Crank from brass strip and soldered a mounting pin on :
 

 
Nearly finished. I'll sand the edges of the verticals down to size tomorrow when the glue is completly dry :
 

 
The Vent :
 

 
Detail of the base and stool :
 

 
With the crank fitted :
 

 
 
 Danny

Lantern
 
The construction of the Lantern begins by milling a plug around which it will be built. I used plastic which had a quite slippery surface to prevent as much glue as possible from sticking. The lantern is tapered from top to bottom and is also at a 15 degree angle from the vertical. I used the dividing head shimmed up to the 15 degree angle on one end :
 

 
The vertical munions are cut to 30 degrees on the edges. They are left overly thick whilst assembly goes on, I'll trim them to the right thickness when all is assembled :
 

 

 

 
The top and bottom are rather tricky to shape, as the 15 degree angle applies again but they are also rounded. I milled the hex to the angle and rounded them with a sanding stick :
 

 

 

 
Continued next post .....

It is blackened... was all other as easy, because the glue give a sort of patina around. after several cleaning and cleaning, blackening and re blackening it looks a little like wrong iron... here the result, I think, I can live with them...
 

 

 

 

 
and how it looks on model:
 

 

 
Alex

Finally a long overdue update. My KF got little attention lately as work and other (fun) projects got in the way.
 
I cut all the mortices for the carlings in the upper deck beams and started to make the first of the knee's and hanging knees. These are not one of my favourite parts to make and unfortunately every beam has a hanging knee. This is due to the heavy load on the deck with all the canons. I'll stick to my mantra and go step by step or part by part in this case
 

 

 

 

 

 
Remco

To convince you that the scale is really 1/48, I put a ''standard measuring tool on the deck.
 
Strange form  of staircase in the last picture.

The "chain" ...
 
cooper wire 0,1 mm, knotted... several trials in the waste box... here the one that looks more or less OK
 

 
The size is OK, still need more trials to reach consistent link size...
 

 
Alex

Doris, I can't find words that accurately describe or praise your work, other than to say absolutely stunningly beautiful model! You have certainly outdone yourself on this one and can be very proud of your accomplishments! I look forward to your nest build! 

Hello, and many thanks for your warm words!
Greg, the doors are glued with industry CA glue from Würth, and hinges are faux. They are simple brass strips and rolled brass rods glued on.
 
Druxey, yesterday I have turned pulleys, here the driven one:
 

 

 
now I have to make a bracket, chain and chimney, and it is barbecue time (if you are not afraid of the smell of heated glue) :
 

 

 
Alex