6ohiocav

Mike,
 
Duh, an actual armrest for a seat.  I thought that was some special naval item that I had never heard of. What kind of wood is that made of that would cause it to curl when painted on one side.  Looks like you fixed it up good.
 

Steve,
Your Crown Timber cherry planking looks fantastic. Great choice of wood. I will be following along.

FINISHED!
I spent the weekend cleaning off dust and touching up paint in preparation of placing the Niagara in its glass enclosure. While I designed the case with an option of removing the ship, it will not be an easy process, and I don’t have plans on doing so. So sealing it away knowing I will not be able to work on it, or tweak something, was a tough moment.
This was a great project. I give credit to the folks at Model Shipways for putting together a great kit. This was my first wooden ship build, and I would recommend the Niagara for any first timer.  There are easier kits out there (and a lot more harder ones) to cut your teeth on, but the Niagara is a good choice. It is reasonably priced (I bought mine at a half off sale). The instructions and plan sheets are good overall, and if followed, will produce an end product you will be proud of..
The kit lacks expensive wood, and some critical parts, but again, for the price, it is still a good purchase. With the exception of the hull planking, I swapped out all of the basswood lumber and laser cut parts with hardwoods (cherry and holly mostly). Those parts that the kit requires the builder to engineer and produce tested my model skills and have made me a better builder. I have seen the term kit “bashing” when someone “goes off the plan.” I guess I did this with this kit, but I can’t say I bashed it, I would rather say I enhanced it. Thanks Model Shipways.
I also have to give credit to Chuck Passaro and his Syren products. I used his rope, blocks, hooks, and hearts for all of the rigging. These products make any ship look great, even for us amateurs.
I also give credit to Model Ship World and my fellow Niagara builders. I would never have purchased this kit, let alone make the effort to build it, without the wealth of information and full color pictures available on this site. Builders like Bahamas Diver, Xken, Patrickmil, Greatgalleons, Mikiek, and others who sailed the lakes with their Niagara Builds were inspirations and great teachers. My project would have sunk to the bottom of Lake Erie without their guidance. They had my back.
I can't forget my fellow members of the Shipwrights of the Central Ohio modelling club. The long drive to our monthly meetings is always worth the trip. Great knowledge, experience and fellowship. Thanks Bill for everything you do for our club
And finally, to those of you out there that stopped in to see this project and lent advice and words of encouragement. As I am sure you all know, getting an “atta boy” from an experienced shipwright is energizing.
Here are some final photos as I mark my build log officially FINISHED.

FINISHED!
I spent the weekend cleaning off dust and touching up paint in preparation of placing the Niagara in its glass enclosure. While I designed the case with an option of removing the ship, it will not be an easy process, and I don’t have plans on doing so. So sealing it away knowing I will not be able to work on it, or tweak something, was a tough moment.
This was a great project. I give credit to the folks at Model Shipways for putting together a great kit. This was my first wooden ship build, and I would recommend the Niagara for any first timer.  There are easier kits out there (and a lot more harder ones) to cut your teeth on, but the Niagara is a good choice. It is reasonably priced (I bought mine at a half off sale). The instructions and plan sheets are good overall, and if followed, will produce an end product you will be proud of..
The kit lacks expensive wood, and some critical parts, but again, for the price, it is still a good purchase. With the exception of the hull planking, I swapped out all of the basswood lumber and laser cut parts with hardwoods (cherry and holly mostly). Those parts that the kit requires the builder to engineer and produce tested my model skills and have made me a better builder. I have seen the term kit “bashing” when someone “goes off the plan.” I guess I did this with this kit, but I can’t say I bashed it, I would rather say I enhanced it. Thanks Model Shipways.
I also have to give credit to Chuck Passaro and his Syren products. I used his rope, blocks, hooks, and hearts for all of the rigging. These products make any ship look great, even for us amateurs.
I also give credit to Model Ship World and my fellow Niagara builders. I would never have purchased this kit, let alone make the effort to build it, without the wealth of information and full color pictures available on this site. Builders like Bahamas Diver, Xken, Patrickmil, Greatgalleons, Mikiek, and others who sailed the lakes with their Niagara Builds were inspirations and great teachers. My project would have sunk to the bottom of Lake Erie without their guidance. They had my back.
I can't forget my fellow members of the Shipwrights of the Central Ohio modelling club. The long drive to our monthly meetings is always worth the trip. Great knowledge, experience and fellowship. Thanks Bill for everything you do for our club
And finally, to those of you out there that stopped in to see this project and lent advice and words of encouragement. As I am sure you all know, getting an “atta boy” from an experienced shipwright is energizing.
Here are some final photos as I mark my build log officially FINISHED.

Steve,
Your Crown Timber cherry planking looks fantastic. Great choice of wood. I will be following along.

FINISHED!
I spent the weekend cleaning off dust and touching up paint in preparation of placing the Niagara in its glass enclosure. While I designed the case with an option of removing the ship, it will not be an easy process, and I don’t have plans on doing so. So sealing it away knowing I will not be able to work on it, or tweak something, was a tough moment.
This was a great project. I give credit to the folks at Model Shipways for putting together a great kit. This was my first wooden ship build, and I would recommend the Niagara for any first timer.  There are easier kits out there (and a lot more harder ones) to cut your teeth on, but the Niagara is a good choice. It is reasonably priced (I bought mine at a half off sale). The instructions and plan sheets are good overall, and if followed, will produce an end product you will be proud of..
The kit lacks expensive wood, and some critical parts, but again, for the price, it is still a good purchase. With the exception of the hull planking, I swapped out all of the basswood lumber and laser cut parts with hardwoods (cherry and holly mostly). Those parts that the kit requires the builder to engineer and produce tested my model skills and have made me a better builder. I have seen the term kit “bashing” when someone “goes off the plan.” I guess I did this with this kit, but I can’t say I bashed it, I would rather say I enhanced it. Thanks Model Shipways.
I also have to give credit to Chuck Passaro and his Syren products. I used his rope, blocks, hooks, and hearts for all of the rigging. These products make any ship look great, even for us amateurs.
I also give credit to Model Ship World and my fellow Niagara builders. I would never have purchased this kit, let alone make the effort to build it, without the wealth of information and full color pictures available on this site. Builders like Bahamas Diver, Xken, Patrickmil, Greatgalleons, Mikiek, and others who sailed the lakes with their Niagara Builds were inspirations and great teachers. My project would have sunk to the bottom of Lake Erie without their guidance. They had my back.
I can't forget my fellow members of the Shipwrights of the Central Ohio modelling club. The long drive to our monthly meetings is always worth the trip. Great knowledge, experience and fellowship. Thanks Bill for everything you do for our club
And finally, to those of you out there that stopped in to see this project and lent advice and words of encouragement. As I am sure you all know, getting an “atta boy” from an experienced shipwright is energizing.
Here are some final photos as I mark my build log officially FINISHED.

FINISHED!
I spent the weekend cleaning off dust and touching up paint in preparation of placing the Niagara in its glass enclosure. While I designed the case with an option of removing the ship, it will not be an easy process, and I don’t have plans on doing so. So sealing it away knowing I will not be able to work on it, or tweak something, was a tough moment.
This was a great project. I give credit to the folks at Model Shipways for putting together a great kit. This was my first wooden ship build, and I would recommend the Niagara for any first timer.  There are easier kits out there (and a lot more harder ones) to cut your teeth on, but the Niagara is a good choice. It is reasonably priced (I bought mine at a half off sale). The instructions and plan sheets are good overall, and if followed, will produce an end product you will be proud of..
The kit lacks expensive wood, and some critical parts, but again, for the price, it is still a good purchase. With the exception of the hull planking, I swapped out all of the basswood lumber and laser cut parts with hardwoods (cherry and holly mostly). Those parts that the kit requires the builder to engineer and produce tested my model skills and have made me a better builder. I have seen the term kit “bashing” when someone “goes off the plan.” I guess I did this with this kit, but I can’t say I bashed it, I would rather say I enhanced it. Thanks Model Shipways.
I also have to give credit to Chuck Passaro and his Syren products. I used his rope, blocks, hooks, and hearts for all of the rigging. These products make any ship look great, even for us amateurs.
I also give credit to Model Ship World and my fellow Niagara builders. I would never have purchased this kit, let alone make the effort to build it, without the wealth of information and full color pictures available on this site. Builders like Bahamas Diver, Xken, Patrickmil, Greatgalleons, Mikiek, and others who sailed the lakes with their Niagara Builds were inspirations and great teachers. My project would have sunk to the bottom of Lake Erie without their guidance. They had my back.
I can't forget my fellow members of the Shipwrights of the Central Ohio modelling club. The long drive to our monthly meetings is always worth the trip. Great knowledge, experience and fellowship. Thanks Bill for everything you do for our club
And finally, to those of you out there that stopped in to see this project and lent advice and words of encouragement. As I am sure you all know, getting an “atta boy” from an experienced shipwright is energizing.
Here are some final photos as I mark my build log officially FINISHED.

FINISHED!
I spent the weekend cleaning off dust and touching up paint in preparation of placing the Niagara in its glass enclosure. While I designed the case with an option of removing the ship, it will not be an easy process, and I don’t have plans on doing so. So sealing it away knowing I will not be able to work on it, or tweak something, was a tough moment.
This was a great project. I give credit to the folks at Model Shipways for putting together a great kit. This was my first wooden ship build, and I would recommend the Niagara for any first timer.  There are easier kits out there (and a lot more harder ones) to cut your teeth on, but the Niagara is a good choice. It is reasonably priced (I bought mine at a half off sale). The instructions and plan sheets are good overall, and if followed, will produce an end product you will be proud of..
The kit lacks expensive wood, and some critical parts, but again, for the price, it is still a good purchase. With the exception of the hull planking, I swapped out all of the basswood lumber and laser cut parts with hardwoods (cherry and holly mostly). Those parts that the kit requires the builder to engineer and produce tested my model skills and have made me a better builder. I have seen the term kit “bashing” when someone “goes off the plan.” I guess I did this with this kit, but I can’t say I bashed it, I would rather say I enhanced it. Thanks Model Shipways.
I also have to give credit to Chuck Passaro and his Syren products. I used his rope, blocks, hooks, and hearts for all of the rigging. These products make any ship look great, even for us amateurs.
I also give credit to Model Ship World and my fellow Niagara builders. I would never have purchased this kit, let alone make the effort to build it, without the wealth of information and full color pictures available on this site. Builders like Bahamas Diver, Xken, Patrickmil, Greatgalleons, Mikiek, and others who sailed the lakes with their Niagara Builds were inspirations and great teachers. My project would have sunk to the bottom of Lake Erie without their guidance. They had my back.
I can't forget my fellow members of the Shipwrights of the Central Ohio modelling club. The long drive to our monthly meetings is always worth the trip. Great knowledge, experience and fellowship. Thanks Bill for everything you do for our club
And finally, to those of you out there that stopped in to see this project and lent advice and words of encouragement. As I am sure you all know, getting an “atta boy” from an experienced shipwright is energizing.
Here are some final photos as I mark my build log officially FINISHED.

LATEST PHOTOS OF THE NIAGARA.
 
And here are some updated photos of the Niagara in its new shipyard.
 
 

I'M BACK
After a 3 month hiatus, I am back in the shipyard.  A lot has happened since then.  My wife and I bought a new house in January. It needed a new kitchen and bathrooms. So I put my micro amateur talents on the shelf and dusted off my macro carpentry skills and gutted and rebuilt the entire 1st floor. We were able to move in on June 1. For all of the diversionary work, I was rewarded with a new indoor workshop in the basement. It is a great space, with 13 course block walls, that opens out into the backyard onto a cement deck. I spent the last month setting up the new workshop.
Then another diversion of sorts. My wife saw a notice in the local auction guide showing an estate sale that had a large HMS Victory model in a showcase on the listed items. There was a woodshop with power tools for sale. That of course caught my eye. The flyer indicated that the deceased owner was a violin maker. I headed over to the sale. To my delight, I realized that the owner also built model ships, and that he had probably built the Victory in the case. 
While I ultimately did not purchase the cased Victory, I did purchase a number of micro tools, including a Proxxon mini mill, Micro Lux thickness sander, table saw and chop saw. I also purchase two complete Mamoli 1/98 Victory Kits, a Model Expo Rope walk kit, and Sergai ship base kit. I bought two huge racks of strip wood, dowels, etc, made mostly of poplar, but some of boxwood, cherry, walnut and mahogany. I picked up a small rack of styrene plastic strips and brass and aluminum stock. I bought a homemade rack full of paint brushes, paints, carving tools, forceps, and assorted modelling tools. I also purchased a large showcase with lexan plates. And then finally I purchased a skeleton of a Corell Victory model (keel, bulkheads and false decks). The house was full of stuff, and the auctioneer was selling whole cabinets and shelf racks. As fellow patrons realized I was the “ship” guy, they began to give me anything ship related that ended up in their cabinets. I therefore walked out of the sale with a full set of plans for the Corell Victory, a full set of plans for a Mantua Victory, a three ring binder of 8x11 color pictures of the HMS Victory taken in Portsmouth England, probably taken by the owner, that focus on important details for someone that wants to build a model. THIS WAS AN INCREDIBLE SALE FOR A SHIPBUILDER.
In the end, I walked out of there with all of this wonderful stuff for hundreds less than the going retail price of just one of the Mamoli Victory Kits. So, when I set up my workshop, I was able to add all of my new toys.
I am attaching some photos of the items I picked up at the sale and the new workshop….. And YES, I will be turning my attention to finishing my Niagara.  Here are some photos of the ship.  It survived the move, with only one small knot giving way on the jib boom. I have to finish up the rigging on the main mast, mostly halliards, and the bracing. I need to work on the anchors and then figure out what to do with the hammock rails. I am really getting close to finishing her up, and I now have a great display case waiting for her.
THEN??? Do I tackle the HMS Victory? I never planned on doing that, but I now have a kit sitting in the workshop that I will have to look at. While I will ponder that monumental decision, I do know that I won’t be building TWO Victories, so if anyone is interested in the second Mamoli Kit, send me a private e-mail.
Glad to be back! I will be trying to catch up on everyone’s build logs.

CLEWLINES AND SHEETS
While I have been working on prototypes of my scratch-build ship’s boats, I noted that we now have a new format to the site.  Looks great.  Thanks to the ADMINS. I can’t imagine the time it takes to keep all of this up to date.
Since I hit a snag on what to do with the clewlines and sheets for a ship rigged without sails, I broke down and secured a copy of Peterssons book “Rigging Period Ship Models” and found an answer in the diagram on page 49. Using that as a guide, I rigged my topsail clews and sheets. An adequate solution.

FINISHED!
I spent the weekend cleaning off dust and touching up paint in preparation of placing the Niagara in its glass enclosure. While I designed the case with an option of removing the ship, it will not be an easy process, and I don’t have plans on doing so. So sealing it away knowing I will not be able to work on it, or tweak something, was a tough moment.
This was a great project. I give credit to the folks at Model Shipways for putting together a great kit. This was my first wooden ship build, and I would recommend the Niagara for any first timer.  There are easier kits out there (and a lot more harder ones) to cut your teeth on, but the Niagara is a good choice. It is reasonably priced (I bought mine at a half off sale). The instructions and plan sheets are good overall, and if followed, will produce an end product you will be proud of..
The kit lacks expensive wood, and some critical parts, but again, for the price, it is still a good purchase. With the exception of the hull planking, I swapped out all of the basswood lumber and laser cut parts with hardwoods (cherry and holly mostly). Those parts that the kit requires the builder to engineer and produce tested my model skills and have made me a better builder. I have seen the term kit “bashing” when someone “goes off the plan.” I guess I did this with this kit, but I can’t say I bashed it, I would rather say I enhanced it. Thanks Model Shipways.
I also have to give credit to Chuck Passaro and his Syren products. I used his rope, blocks, hooks, and hearts for all of the rigging. These products make any ship look great, even for us amateurs.
I also give credit to Model Ship World and my fellow Niagara builders. I would never have purchased this kit, let alone make the effort to build it, without the wealth of information and full color pictures available on this site. Builders like Bahamas Diver, Xken, Patrickmil, Greatgalleons, Mikiek, and others who sailed the lakes with their Niagara Builds were inspirations and great teachers. My project would have sunk to the bottom of Lake Erie without their guidance. They had my back.
I can't forget my fellow members of the Shipwrights of the Central Ohio modelling club. The long drive to our monthly meetings is always worth the trip. Great knowledge, experience and fellowship. Thanks Bill for everything you do for our club
And finally, to those of you out there that stopped in to see this project and lent advice and words of encouragement. As I am sure you all know, getting an “atta boy” from an experienced shipwright is energizing.
Here are some final photos as I mark my build log officially FINISHED.

FINISHED!
I spent the weekend cleaning off dust and touching up paint in preparation of placing the Niagara in its glass enclosure. While I designed the case with an option of removing the ship, it will not be an easy process, and I don’t have plans on doing so. So sealing it away knowing I will not be able to work on it, or tweak something, was a tough moment.
This was a great project. I give credit to the folks at Model Shipways for putting together a great kit. This was my first wooden ship build, and I would recommend the Niagara for any first timer.  There are easier kits out there (and a lot more harder ones) to cut your teeth on, but the Niagara is a good choice. It is reasonably priced (I bought mine at a half off sale). The instructions and plan sheets are good overall, and if followed, will produce an end product you will be proud of..
The kit lacks expensive wood, and some critical parts, but again, for the price, it is still a good purchase. With the exception of the hull planking, I swapped out all of the basswood lumber and laser cut parts with hardwoods (cherry and holly mostly). Those parts that the kit requires the builder to engineer and produce tested my model skills and have made me a better builder. I have seen the term kit “bashing” when someone “goes off the plan.” I guess I did this with this kit, but I can’t say I bashed it, I would rather say I enhanced it. Thanks Model Shipways.
I also have to give credit to Chuck Passaro and his Syren products. I used his rope, blocks, hooks, and hearts for all of the rigging. These products make any ship look great, even for us amateurs.
I also give credit to Model Ship World and my fellow Niagara builders. I would never have purchased this kit, let alone make the effort to build it, without the wealth of information and full color pictures available on this site. Builders like Bahamas Diver, Xken, Patrickmil, Greatgalleons, Mikiek, and others who sailed the lakes with their Niagara Builds were inspirations and great teachers. My project would have sunk to the bottom of Lake Erie without their guidance. They had my back.
I can't forget my fellow members of the Shipwrights of the Central Ohio modelling club. The long drive to our monthly meetings is always worth the trip. Great knowledge, experience and fellowship. Thanks Bill for everything you do for our club
And finally, to those of you out there that stopped in to see this project and lent advice and words of encouragement. As I am sure you all know, getting an “atta boy” from an experienced shipwright is energizing.
Here are some final photos as I mark my build log officially FINISHED.

FINISHED!
I spent the weekend cleaning off dust and touching up paint in preparation of placing the Niagara in its glass enclosure. While I designed the case with an option of removing the ship, it will not be an easy process, and I don’t have plans on doing so. So sealing it away knowing I will not be able to work on it, or tweak something, was a tough moment.
This was a great project. I give credit to the folks at Model Shipways for putting together a great kit. This was my first wooden ship build, and I would recommend the Niagara for any first timer.  There are easier kits out there (and a lot more harder ones) to cut your teeth on, but the Niagara is a good choice. It is reasonably priced (I bought mine at a half off sale). The instructions and plan sheets are good overall, and if followed, will produce an end product you will be proud of..
The kit lacks expensive wood, and some critical parts, but again, for the price, it is still a good purchase. With the exception of the hull planking, I swapped out all of the basswood lumber and laser cut parts with hardwoods (cherry and holly mostly). Those parts that the kit requires the builder to engineer and produce tested my model skills and have made me a better builder. I have seen the term kit “bashing” when someone “goes off the plan.” I guess I did this with this kit, but I can’t say I bashed it, I would rather say I enhanced it. Thanks Model Shipways.
I also have to give credit to Chuck Passaro and his Syren products. I used his rope, blocks, hooks, and hearts for all of the rigging. These products make any ship look great, even for us amateurs.
I also give credit to Model Ship World and my fellow Niagara builders. I would never have purchased this kit, let alone make the effort to build it, without the wealth of information and full color pictures available on this site. Builders like Bahamas Diver, Xken, Patrickmil, Greatgalleons, Mikiek, and others who sailed the lakes with their Niagara Builds were inspirations and great teachers. My project would have sunk to the bottom of Lake Erie without their guidance. They had my back.
I can't forget my fellow members of the Shipwrights of the Central Ohio modelling club. The long drive to our monthly meetings is always worth the trip. Great knowledge, experience and fellowship. Thanks Bill for everything you do for our club
And finally, to those of you out there that stopped in to see this project and lent advice and words of encouragement. As I am sure you all know, getting an “atta boy” from an experienced shipwright is energizing.
Here are some final photos as I mark my build log officially FINISHED.

MOUNTING PEDESTALS
 
I worked on a method of mounting my ship to its display base. And yes, like experienced model ship builders, this was something I should have done long long ago. Kudos to those that incorporate mounting bolts and threaded nuts to their hulls before it is planked. Being my first wooden ship model, when I started this project years ago, I was a lot younger, but not wiser. Just finishing the project was too much to comprehend let alone that there would be a time when I would have to actually mount it to something.
 
I ordered some brass pedestals with long wood screws. But screwing wood screws into a quarter inch wide plywood keel with no backing was not going to do it. So I opted to mortise a notch and glue in a stainless steel nut that would accept a two inch machine screw. The diameter of the screw was wider than the hole in my brass pedestals, so I would have to create new ones. I opted to turn them on my lathe from some spalted maple.
 
This was a long process, and a scary one as well. Working on the bottom of the hull of a finished rigged sailing ship is ridiculous. Taking a drill to the hull, while sitting on the floor, with the ship hanging off the edge of the bench is not for the faint of heart. I paid for my ignorance.
 
Here are a series of photos that show how I did it.  In the end, the ship is stable enough, as long as it is not hit with any rough seas.

FINISHED!
I spent the weekend cleaning off dust and touching up paint in preparation of placing the Niagara in its glass enclosure. While I designed the case with an option of removing the ship, it will not be an easy process, and I don’t have plans on doing so. So sealing it away knowing I will not be able to work on it, or tweak something, was a tough moment.
This was a great project. I give credit to the folks at Model Shipways for putting together a great kit. This was my first wooden ship build, and I would recommend the Niagara for any first timer.  There are easier kits out there (and a lot more harder ones) to cut your teeth on, but the Niagara is a good choice. It is reasonably priced (I bought mine at a half off sale). The instructions and plan sheets are good overall, and if followed, will produce an end product you will be proud of..
The kit lacks expensive wood, and some critical parts, but again, for the price, it is still a good purchase. With the exception of the hull planking, I swapped out all of the basswood lumber and laser cut parts with hardwoods (cherry and holly mostly). Those parts that the kit requires the builder to engineer and produce tested my model skills and have made me a better builder. I have seen the term kit “bashing” when someone “goes off the plan.” I guess I did this with this kit, but I can’t say I bashed it, I would rather say I enhanced it. Thanks Model Shipways.
I also have to give credit to Chuck Passaro and his Syren products. I used his rope, blocks, hooks, and hearts for all of the rigging. These products make any ship look great, even for us amateurs.
I also give credit to Model Ship World and my fellow Niagara builders. I would never have purchased this kit, let alone make the effort to build it, without the wealth of information and full color pictures available on this site. Builders like Bahamas Diver, Xken, Patrickmil, Greatgalleons, Mikiek, and others who sailed the lakes with their Niagara Builds were inspirations and great teachers. My project would have sunk to the bottom of Lake Erie without their guidance. They had my back.
I can't forget my fellow members of the Shipwrights of the Central Ohio modelling club. The long drive to our monthly meetings is always worth the trip. Great knowledge, experience and fellowship. Thanks Bill for everything you do for our club
And finally, to those of you out there that stopped in to see this project and lent advice and words of encouragement. As I am sure you all know, getting an “atta boy” from an experienced shipwright is energizing.
Here are some final photos as I mark my build log officially FINISHED.

FINISHED!
I spent the weekend cleaning off dust and touching up paint in preparation of placing the Niagara in its glass enclosure. While I designed the case with an option of removing the ship, it will not be an easy process, and I don’t have plans on doing so. So sealing it away knowing I will not be able to work on it, or tweak something, was a tough moment.
This was a great project. I give credit to the folks at Model Shipways for putting together a great kit. This was my first wooden ship build, and I would recommend the Niagara for any first timer.  There are easier kits out there (and a lot more harder ones) to cut your teeth on, but the Niagara is a good choice. It is reasonably priced (I bought mine at a half off sale). The instructions and plan sheets are good overall, and if followed, will produce an end product you will be proud of..
The kit lacks expensive wood, and some critical parts, but again, for the price, it is still a good purchase. With the exception of the hull planking, I swapped out all of the basswood lumber and laser cut parts with hardwoods (cherry and holly mostly). Those parts that the kit requires the builder to engineer and produce tested my model skills and have made me a better builder. I have seen the term kit “bashing” when someone “goes off the plan.” I guess I did this with this kit, but I can’t say I bashed it, I would rather say I enhanced it. Thanks Model Shipways.
I also have to give credit to Chuck Passaro and his Syren products. I used his rope, blocks, hooks, and hearts for all of the rigging. These products make any ship look great, even for us amateurs.
I also give credit to Model Ship World and my fellow Niagara builders. I would never have purchased this kit, let alone make the effort to build it, without the wealth of information and full color pictures available on this site. Builders like Bahamas Diver, Xken, Patrickmil, Greatgalleons, Mikiek, and others who sailed the lakes with their Niagara Builds were inspirations and great teachers. My project would have sunk to the bottom of Lake Erie without their guidance. They had my back.
I can't forget my fellow members of the Shipwrights of the Central Ohio modelling club. The long drive to our monthly meetings is always worth the trip. Great knowledge, experience and fellowship. Thanks Bill for everything you do for our club
And finally, to those of you out there that stopped in to see this project and lent advice and words of encouragement. As I am sure you all know, getting an “atta boy” from an experienced shipwright is energizing.
Here are some final photos as I mark my build log officially FINISHED.

FINISHED!
I spent the weekend cleaning off dust and touching up paint in preparation of placing the Niagara in its glass enclosure. While I designed the case with an option of removing the ship, it will not be an easy process, and I don’t have plans on doing so. So sealing it away knowing I will not be able to work on it, or tweak something, was a tough moment.
This was a great project. I give credit to the folks at Model Shipways for putting together a great kit. This was my first wooden ship build, and I would recommend the Niagara for any first timer.  There are easier kits out there (and a lot more harder ones) to cut your teeth on, but the Niagara is a good choice. It is reasonably priced (I bought mine at a half off sale). The instructions and plan sheets are good overall, and if followed, will produce an end product you will be proud of..
The kit lacks expensive wood, and some critical parts, but again, for the price, it is still a good purchase. With the exception of the hull planking, I swapped out all of the basswood lumber and laser cut parts with hardwoods (cherry and holly mostly). Those parts that the kit requires the builder to engineer and produce tested my model skills and have made me a better builder. I have seen the term kit “bashing” when someone “goes off the plan.” I guess I did this with this kit, but I can’t say I bashed it, I would rather say I enhanced it. Thanks Model Shipways.
I also have to give credit to Chuck Passaro and his Syren products. I used his rope, blocks, hooks, and hearts for all of the rigging. These products make any ship look great, even for us amateurs.
I also give credit to Model Ship World and my fellow Niagara builders. I would never have purchased this kit, let alone make the effort to build it, without the wealth of information and full color pictures available on this site. Builders like Bahamas Diver, Xken, Patrickmil, Greatgalleons, Mikiek, and others who sailed the lakes with their Niagara Builds were inspirations and great teachers. My project would have sunk to the bottom of Lake Erie without their guidance. They had my back.
I can't forget my fellow members of the Shipwrights of the Central Ohio modelling club. The long drive to our monthly meetings is always worth the trip. Great knowledge, experience and fellowship. Thanks Bill for everything you do for our club
And finally, to those of you out there that stopped in to see this project and lent advice and words of encouragement. As I am sure you all know, getting an “atta boy” from an experienced shipwright is energizing.
Here are some final photos as I mark my build log officially FINISHED.

DISPLAY CASE
While I was away from my log, I did work on building a display case and table. I had some great cherry that I harvested from my farm, and used that for the base. It has great grain. I added a decorative inlay.
I also decided to add LED strap lighting. That took some figuring. I decided to run the cord down one of the corner posts inside the groove for the glass. I cut a channel along the top rails. The strap lighting has adhesive that adhered to the bottom of the channel. I had to purchase corner splices. I have added photos.
When I dry fitted everything together and checked out the lighting, I realized that the channel was not deep enough to hide the glare from the LED light emitters. I will be adding some thin trim pieces to fix this.
I love the lighting. While it is LED, the system has a remote that gives me the ability to change the lighting quite a bit. I can set it with a low warm glow or bright LED. When I get everything put together and put the case in place, I will experiment to see what lighting looks best.
Next up, mounting the ship…. A daunting challenge that I should have considered a long time ago. More on that later.

RAISING THE FLAG
 
It is time to raise the flag! The shipwrights from Presque Isle have turned the US Brig Niagara over to the US Great Lakes Command and Capt. Oliver Hazard Perry. Capt. Perry's flag carried the famous quote "Don't give up the Ship" uttered by his late friend, Capt. James Lawrence as he lay dying on the deck of his ship the USS Chesapeake in battle with the HMS Shannon.

I printed an image of the flag onto printable fabric, cut it out, rigged it to lanyards,  and ran them through a block on top of the foremast.
 
We christen this ship the US Brig Niagara. I hoist this flag in honor to all of the sailors who fought and died for Country or Crown in the Battle of Lake Erie, a lake where I grew up.
 
And with that, this project is over. Once I button up the display case and take some final photos, I will mark this build log "FINISHED"
 

Tom,
Thanks for the look. I raise my glass to all of my fellow Niagara builders.
 
Ken, Mark, Alan, Steve and Mike,
Trust me, I needed that glass of Jamison after the mounting process. I only broke off the tip off the dolphin striker, yanked the port side course brace from its pin, and loosened one of the hammock rails......there are just no handles to grab onto when you take a jack hammer to your ship.....so we put in for repairs and were able to make everything right again.
 

Tom,
Thanks for the look. I raise my glass to all of my fellow Niagara builders.
 
Ken, Mark, Alan, Steve and Mike,
Trust me, I needed that glass of Jamison after the mounting process. I only broke off the tip off the dolphin striker, yanked the port side course brace from its pin, and loosened one of the hammock rails......there are just no handles to grab onto when you take a jack hammer to your ship.....so we put in for repairs and were able to make everything right again.
 

RAISING THE FLAG
 
It is time to raise the flag! The shipwrights from Presque Isle have turned the US Brig Niagara over to the US Great Lakes Command and Capt. Oliver Hazard Perry. Capt. Perry's flag carried the famous quote "Don't give up the Ship" uttered by his late friend, Capt. James Lawrence as he lay dying on the deck of his ship the USS Chesapeake in battle with the HMS Shannon.

I printed an image of the flag onto printable fabric, cut it out, rigged it to lanyards,  and ran them through a block on top of the foremast.
 
We christen this ship the US Brig Niagara. I hoist this flag in honor to all of the sailors who fought and died for Country or Crown in the Battle of Lake Erie, a lake where I grew up.
 
And with that, this project is over. Once I button up the display case and take some final photos, I will mark this build log "FINISHED"
 

Mike,
 
I actually made a cradle out of some curly maple. I used the laser cut template from the bulkheads to trace the vertical supports and cut them out on the band saw. Before I came up with a method to secure the hull, I decided I didn't really like my design. I thought it was too intrusive. That's when I turned to pedestals. The key though is to do this early in a build.